New h2o upgrade in my antec p180b sugestions & tips!

[LsdBoy]

Ok, I'm plaing to upgrade my cureent h2o rig with this:


2xEK-MOSFET Asus 1/3/3a Backplate
10m x 7/16" ID (5/8" OD) Tygon R-3603 Laboratory-Grade Tubing
1xD-Tek Fuzion Pro-Mount Hardware
1xD-Tek FuZion Accelerator Nozzle Kit
5xEK Stubby Fitting (G 1/4" Thread, 1/2" OD)
9xEK High-Flow Fitting (G 1/4" Thread, 1/2" OD)
1xD-TEK FuZion Universal CPU Waterblock - 1/2"
2xEK-RES150 Rev.2 Multi-Option Reservoir
2xDanger Den Acetal FillPort
1xLaing DDC w/ Petra'sTech DDCT-01s Top Combo
1xPetra'sTech DDCT-01s Top
2xEK-NB/SB ASUS4 Chipset Waterblock (Acetal)
2xEK-MOSFET ASUS 1a MOSFET Waterblock (Acetal)
3x1/2" OD T-Fitting (for 1/2" and 7/16" ID Tubing)
28xHerbie Clip® Nylon Hose Clamp Size H - Black
Things that I have from my old rigg:
2xAlphacool NexXxoS NVXP-3
1xAlphacool Laing DCC 10w + ultra top
1xMRC 320 radiator
6x120mm noctua NF-s12 @ 7v
1xSingle BIpro 120mm

I'm planning to run this in 2 loops:

Loop1:
D-TEK FuZion
2xAlphacool NexXxoS NVXP-3
1xMRC 320 radiator
EK-RES150 Rev.2 Multi-Option Reservoir
Laing DDC w/ Petra'sTech DDCT-01s Top Combo

Loop2:
EK-SB ASUS4 Chipset Waterblock (Acetal)
EK-NB ASUS4 Chipset Waterblock (Acetal)
2xEK-MOSFET ASUS 1a MOSFET Waterblock
1xSingle BIpro 120mm
EK-RES150 Rev.2 Multi-Option Reservoir
1xAlphacool Laing DCC 10w + ultra top

Will my single BIpro be able to cool my sb, nb and 2xmosfets on my asus striker extreme?

Some pics on my current rigg:
http://static.pici.se/pictures/qXxDDaexI.jpg
Were the reservoir is now will i place the 18w lain ddc with the reservoir above the pump inlet.

http://static.pici.se/pictures/JMppuUGzi.jpg
http://static.pici.se/pictures/VAVUyVbzl.jpg
This is were I'm planing to place my BIpro

http://www.swiftnets.com/assets/images/products/Stealth/Stealth-sli-parallel.jpg
I'm plaing to run my sli blocks like this, will it work?

This is a crappy skiss that i made in paint, my real skiss is in my head. ;)
http://static.pici.se/pictures/gtqXceJvD.jpg

This is how I'm planing to place the pumps and reservoirs.
http://www.sweclockers.com/upload/gallery/14700-large.jpg
http://www.sweclockers.com/upload/gallery/14711-large.jpg

All this will be palced inside my Antec p180b. So any tips or suggestions to my upgrade. I live in sweden so i will place an order from EKwaterblocks to get the mosfets blocks with the acetal top, the rest will be orderd from petrastechshop. The total cost of this upgrade will be like 800$ including the shipping costs.

//LsdBoy

[Pedalmonkey]

you might be able to save yourself some space with the XSPC res tops for the DDC's, plus your pumps will perform a bit better.

Im really looking forward to seeing this done as i've been thinking more an more about ditching the MM cube and trying to pack 3 loops in a mid tower. :p

[Tw1st3d]

+1 for XSPC DDC res top

You could put a dual infront like this http://www.xtremesystems.org/forums/showthread.php?t=183018

Put GFX is a loop for itself and cpu in a loop for itself

[Pedalmonkey]

@ Tw1st3d, 1 just spell your name with letter, lol :D 2. a 120.1 will not handle SLI GPU's or a loaded semi OC CPU. however a 320 will handle all three and a 120 will do the Mobo loop perfect. thats just my opinion. :)

[LsdBoy]

+1 for XSPC DDC res top

You could put a dual infront like this http://www.xtremesystems.org/forums/showthread.php?t=183018

Put GFX is a loop for itself and cpu in a loop for itself

Ok, i will maby go for the EK-DDC X-RES 140 instead. But will it preform better? The placement of the mcr220 radiator could work for me. But the upper 5,25bay is taken by my mcr320 radiator, I also need to find a new place for my Scythe Quiet Drive with my 74gb wd raptor inside. The best thing with having the petras tops and the normal reservoirs is if i have to redo my system it would be alot easier to make a new build.

You say that my cpu should have it's own loop and then run mosfets, gpu, sb & nb in the other loop?