PDA

View Full Version : how to remove stok cooler glaciator asus 3870



rat0n
03-11-2008, 09:25 AM
I have a new asus EAH3870 and comes whit a cooler desing by asus name glaciator. There is a photo http://www.pccomponentes.com/fotos/tarjetas_graficas/tarjetas_graficas_ati_pci_express/asus_radeon_eah3850_g_htdi_512m_ddr3_pci_e.jpg

I try to get te cooler out, remove the four screws on the back side of the card but it dont move. Seems to be stuck or solder. I want to use my danger den mace 4 on that card. Have any one remove these cooler.

Xilikon
03-11-2008, 09:27 AM
Did you try twisting the cooler since it might be struck by suction ?

rat0n
03-11-2008, 09:34 AM
yes i try twisting and cooler and oes not move even one millimeter.
It,s Heavily pasted

Xilikon
03-11-2008, 09:39 AM
If it doesn't move one millimeter, it might mean you forgot a screw somewhere.

MaXXimus
03-11-2008, 10:17 AM
Try heating it up first with a hairdryer

barfastic
03-11-2008, 11:19 AM
did u unscrew the cards on the back? i knwo its a blonde thing to say, but yeah... check it

afX
03-11-2008, 01:38 PM
Try heating it up first with a hairdryer

thats a good idea, it helped me remove a silent cooler on my x850xt a while back

MaXXimus
03-11-2008, 02:37 PM
Yea Im expecting to have to do that with removing my chipset and mosfets, after reading about some issues with removing them with the factory crap they put on thats almost like a cement.

C'DaleRider
03-11-2008, 02:43 PM
Easier to do is use cold on them.....a can of circuit freeze spray (it's cold spray used to trace circuit faults that occur when the circuits heat up...which is why I worry about using excessive heat on circuitry and used cold instead), about 20-30 sec. of spray over, under, around the heatsink and it should just pop off with some persuasion.

Used that stuff to pop off my NB/SB heatpipe/heatsink from my Maximus Formula motherboard. Took all of about 1 minute total from start to heatsink in my hand.

rat0n
03-11-2008, 04:07 PM
finaly i can remove the cooler. It have a termal pad. Thanks to all now the card go at 850 core 1200 mems at 40º a little more that air cooler. can push the core to 877 but on the second thest of 3dmark my system freeze and i have tho reset. but 18100 3dmarks is enought

FlyingFreeman
04-23-2008, 10:08 AM
Hello, how did you remove the glaciator please?
with heat or cold?
I tried to remove it to put a duorb but failed to do it :(
Thank you