Rebuilding the V2000-tri loop (pic heavy)

[disruptfam]

Hey guys... I'm back for my rebuild.For those who don't know and wondering why i pulling such a new build apart,I can thank dye build up for that.

So i pulled my rig apart last night drained all my loops and cleaned out all my blocks,rads,etc.

And while my system is down i decided to change/add/remove things to come up with a new and improved tri-loop.Will be logging all my progress here... :up:

Ok so like i said i cleaned my system took it apart (sorry no pics of this a bit boring really)

I got my bitpower 3/8 5/8 1/8 wall fittings and few other bit's and piece's

Ok so here are some pic's of my blocks,rads and pumps with the new fittings:

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics019.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics016.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics017.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics014.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics020.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics021.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics035.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics034.jpg

I was disappointed that i couldn't fit these fittings on my fuzion cpu block or my ek 680i and nf4 rev 1.1 block :( well i can fit 1 lol

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics024.jpg

(pictured all my blocks,pumps,rads mcr120,220 and 320) Still waiting on ek supreme, 680i mofset block part2 another ddc 3.2 w/top a few bp fittings and tygon r3400 black tubing :)

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics037.jpg


As you can see the mirror finish i originally did is still ok ( just needs a couple more buff job's to get it back to what it was)

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics041.jpg

Pic's of my now empty v2000

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics051.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics054.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpcpics056.jpg

That's all for now guys... :)

[disruptfam]

UPDATE:

Ek supreme came in today a few shot's sexy sexy block :)



http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog001.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog003.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog006.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog016.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog017.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog020.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog022.jpg

Ain't she a beaut! hoping it performs well !

Blocks mounted

Waiting on second ek g80 wb and #2 mofset block (ek supreme isn't mounted dry mount)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog023.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog025.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog027.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog028.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog031.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog033.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog040.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog046.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog047.jpg

NEW UPDATE!!!!

Ok i'm back build is coming along slowly,Sorry for the lack of updates have been sick with the flu.

So i mounted all three rads and figuring out places for the pumps,res etc.i Decided to remove the bay res's and to go for either the micro res or ek 150,I'm leaning towards to the micro res atm due to smaller form factor.

Some pics!!

mcr120 mounted used the originally 120 fan bracket that came with case took out the dust filter and changed out the screws very easy mod

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog048.jpg

mcr220 mounted (no fans mounted yet)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog051.jpg

topside (had to expand the original cut)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog055.jpg

Was originally going to use my ultra kaze on the mcr220 but they where thick (38mm) so i will have to switch out to a couple yate loon
This is the clearance i'm working with a standard 120mm fan.About 2mm clearance very close to the gfx card.Had to check because i will be running sli.

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog057.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog058.jpg

mcr320 mounted.Just drilled the hole to mount it through the mesh giving it a few inches of clearance from the case floor(I'm still contemplating if should cut the hole in the bottom) I'm not sure if the mcr320 will be gathering hot case air.But most probably will make the cut

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog064.jpg

I put in the mobo just to see how everything will fit

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog068.jpg

case from the front

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog065.jpg

case from the side ( i will be mounting three hd's above the mcr320) Look close you see where that will be.I will be making or buying a couple of pump brackets to mount directly the hd cage.

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog071.jpg

Couple of bling shots :) lol

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog062.jpg

Woot

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog052.jpg

SMALL UPDATE:

Build is slowly coming along,Lack of funds and other commitments has been keeping my busy lately,Anywho here's small update:

I swapped out my 3 x bayres's for 3 x swiftech mrcres due to smaller footprint,I wanted the use of the drive bays for the raptor mod :)

My solution to 3 x mcres in the drive bay's

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog099.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog105.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog104.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog106.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog120.jpg

Everything looks good when it comes in 3's :)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog125.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog127.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog129.jpg

Received my second gtx off ebay,as you can see i stripped it down but dont have the 2nd ek fc block (Should get this week)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog132.jpg

Chucked on the dom ram fan (Was thinking of getting a ram block but didn't bother)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog145.jpg

Waiting for bitpower to release the adapters i need to fit my fittings on the chipset block they are still naked.

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog143.jpg

My fav pic :)

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog130.jpg

SMALL UPDATE

Another small update here guys.Added second gtx w/ek fc block for some sli action,Figuring out mcres position and i did a lil polishing.

Enjoy!!!
SLI . . .
http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog189.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog191.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog192.jpg

Res mounting ( i know it's not straight i'm working on it :) )

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog195.jpg

bling?

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog196.jpg


Here's How it's looking so far

http://i212.photobucket.com/albums/cc30/disruptfam/Adamsworklog193.jpg


More updates soon!

THATS ALL FOR NOW ENJOY!!!

[disruptfam]

reserved final build completion

[starlon]

I don't see no pics.

[Xilikon]

You win as a XS member with great pictures :)

[disruptfam]

cheers!!! rofl :)

[Xilikon]

What did I say ? :shrug:

[starlon]

Those fittings look great.

[dualbrain]

*excited* :yepp:

[shazza]

SO ... what are you going to use for coolant this time around?

[disruptfam]

Those fittings look great.

Yeah they are great.There thick though so some wb's are out of the question with these fittings.

*excited* :yepp:

Me 2!


SO ... what are you going to use for coolant this time around?

distilled and pt_nuke nothing else no dye!! lol :D

[shazza]

distilled and pt_nuke nothing else no dye!! lol

Me too :) Guess we should have just listened to the pros around here, but sometimes you gotta learn through experience.

[disruptfam]

indeed

[FallenCow]

Excellent shots! I'm thinking about switching to those fittings as well.

[LogAn'sRun]

Nice!! That just looks like some WB shop if you ask me!

Agreed on the no dye, that's the way to go. I have my black 3400 sitting right here. . . .

[Nicoleef]

The more i see you modding this case the more i want one. :banana:
Cant wait to see more updates.

:up:

[evil-98]

very sexy rebuild! lets go lets go!

[barfastic]

gogogogo Disruptfam, cant wait. you always got good ideas :D

[alo]

disruptfam, what was wrong with a dye in coolant?

[BNDMOD]

Ohhhh jojojo yeahhhh man... nice work.. i just die for see that finished :d jejeje..... please give us more :d

[NickS]

Lookin' sweet so far - subscribed :)

[Jedda]

Got an understanding lady there dissy.
Using the clean sheets for pics of computers doesn't always go down well.
They can get jealous of all the attention going elsewhere too, I've noticed.
Subb'd

[Xilikon]

disruptfam, what was wrong with a dye in coolant?

If you read the other worklog, you will see it caused some deposits on the loop and gunked blocks. That's the problem with dyes and premade coolants so the best option is to use just distilled + pt nuke.

This is why he is rebuilding the computer with new black tubing and no dye at all. I think the bay reservoirs will be lit with leds instead.

[alo]

If you read the other worklog, you will see it caused some deposits on the loop and gunked blocks.
Could you give a link, please? I would like to see some photos...

Now I'm sure I'm going to use just pure distilled water plus a drop of biocide :up:

[Xilikon]

Look at disruptfam's sig ;)

http://www.xtremesystems.org/forums/showthread.php?t=155784

[disruptfam]

Excellent shots! I'm thinking about switching to those fittings as well.

Thanks! just make sure you find out if your blocks are right to use with this fittings they are thick!


Nice!! That just looks like some WB shop if you ask me!

Agreed on the no dye, that's the way to go. I have my black 3400 sitting right here. . . .

Lol i got a ek supreme and 680i/780i mofset part 2 on the way and maybe even another g80 fc block black acetal of course (was offered a dirt cheap gtx)

My tubing should be here soon can't wait


The more i see you modding this case the more i want one. :banana:
Cant wait to see more updates.



Its a great case if you don't mind modding you have alot of possibilities
:up:


very sexy rebuild! lets go lets go!

Cheers time permitting will have another update tomorrow


gogogogo Disruptfam, cant wait. you always got good ideas :D


disruptfam, what was wrong with a dye in coolant?

Can block up your blocks if too much used or wrong kind used


Ohhhh jojojo yeahhhh man... nice work.. i just die for see that finished :d jejeje..... please give us more :d

:) More soon


Lookin' sweet so far - subscribed :)

thank you


Got an understanding lady there dissy.
Using the clean sheets for pics of computers doesn't always go down well.
They can get jealous of all the attention going elsewhere too, I've noticed.
Subb'd

Lol she wasn't home when i used it but i got abit of a mouthful she i got home for work :rofl:


If you read the other worklog, you will see it caused some deposits on the loop and gunked blocks. That's the problem with dyes and premade coolants so the best option is to use just distilled + pt nuke.

This is why he is rebuilding the computer with new black tubing and no dye at all. I think the bay reservoirs will be lit with leds instead.

Exactly


Could you give a link, please? I would like to see some photos...

linked

Now I'm sure I'm going to use just pure distilled water plus a drop of biocide :up:

:up:

[alo]

Xilikon, I've read that one. But what I've found is just a supposition. One version was insufficient rad, and another was a gunk in waterblocks... I thought may be there are some pics after disassembling the loop...

[Darkfire]

Can I ask what you are planning on using instead of the two EK chipset blocks? I'm thinking of getting the newer DangerDen ones as they look like they may be wide enough to fit those compression fittings on...

[disruptfam]

i'am still using the same blocks just different fittings on those blocks,compression fittings everywhere else

[Breezyjr]

Where did you get your fittings?
I just checked Performance PCs and they are selling the 1/2" one with G1/4 for $9.95 a PIECE! :shocked:

Now, I don't really mind paying for good fittings.... But, I have lost count of how much I"ve spent on the "little things" In fact I just ordered a bunch of regular fittings.... UGH.... I "almost" wish I didn't start my dream buld... hehe:D

And, wondering if those fittings will work with the masterkleer 7/16s tubing. Think it's 5/8" or 3/4" don't remember off the top of my aging memory... heh


thanks...

Breezyjr

[Xilikon]

FrozenCPU sell them. They are 6.99$ each.

[Breezyjr]

Thanks....

Woohoo... another $300 spent, NOT including the new fittings I'll pick up ....

I seriously think I've spent over $1,000 on bits and pieces.... Not ANY hardware. Just tubing, fittings, tops, reseviors, lighting....etc!

UGH, will it ever end... Mooooohahahah NO it won't !!! hahahahaha


Yup, I've lost it!

breezyjr

[disruptfam]

lol

UPDATE IN WORKLOG POST 2:

if pic's are to big let me know i'll downsize them

cheers

[LogAn'sRun]

man, that looks sweet with the EK supreme. I'm glad that somone else bought that block before I did (and made sure the BP's fit).

Good Job!!!

[Breezyjr]

Pics are awesome!

I'm bummed I didn't know about the EK SB block, I went DD, and had to Mod it to fit the GPU. Your's looks like it fits just fine.

Also, I can't remember where I saw it, but I've seen replacement brackets for the Double slot GPU, so they are only single slot. I hope you know what I'm referring to.

Ordered my Bitspower compression fittings today... 30 of them... Should be fun. I just finished up a few things with mine, and I think I'll start my build thread tomorrow morning.... I mean, this morning.... Decided on tri loop! yippee....

Later,
Breezyjr

[otisthecat]

here did you get those fittings from ? was it in oz?

[aspire.comptech]

Absolutely insane how much money your spent so far.

Its shaping up to be one beast of a rig.

[NaeKuh]

Very very sweet Disrupt! :up:

[Xilikon]

I:banana:love the EK sexyness :D

I don't know if Eddy could make a new version of the NB block with barbs in diagonale to clear the BitsPower fittings. If they do, you will have everything without clearance issues.

[barfastic]

ek blocks are teh sex!!!! cant wait till my shipment comes in :D

[disruptfam]

man, that looks sweet with the EK supreme. I'm glad that somone else bought that block before I did (and made sure the BP's fit).

Good Job!!!

cheers man they fit the supreme no issue @ all :) very happy


Pics are awesome!

I'm bummed I didn't know about the EK SB block, I went DD, and had to Mod it to fit the GPU. Your's looks like it fits just fine.

Also, I can't remember where I saw it, but I've seen replacement brackets for the Double slot GPU, so they are only single slot. I hope you know what I'm referring to.

Ordered my Bitspower compression fittings today... 30 of them... Should be fun. I just finished up a few things with mine, and I think I'll start my build thread tomorrow morning.... I mean, this morning.... Decided on tri loop! yippee....

Later,
Breezyjr

30 !! woah! tri-loop sounds good man looking forward to it,and yes i know what you mean by the single slot things i will be getting two.


here did you get those fittings from ? was it in oz?

I got them from frozenpc in u.s but gam had some hes in syd but i already ordered them lol email him on restock

Absolutely insane how much money your spent so far.

Its shaping up to be one beast of a rig.

yeah it's a fair bit but i work very hard so i think i deserve my lil toy hehe


Very very sweet Disrupt! :up:

cheers mate more updates soon :)


I:banana:love the EK sexyness :D

I don't know if Eddy could make a new version of the NB block with barbs in diagonale to clear the BitsPower fittings. If they do, you will have everything without clearance issues.

maybe you email eddy?


ek blocks are teh sex!!!! cant wait till my shipment comes in :D

best looker around, but looks mean nothing to me if it doesn't perform well

cheers all thanks for the comments

[GAM]

Looking good Disruptfam! I'm looking forward to seeing you put it all together. :up:

Cheers
GAM

ps. Still waiting on the R-3400 3/8 5/8 1/8 tubing, sorry. According to original ETA, 1-2 weeks to go. ;)

[disruptfam]

Looking good Disruptfam! I'm looking forward to seeing you put it all together. :up:

Cheers
GAM

ps. Still waiting on the R-3400 3/8 5/8 1/8 tubing, sorry. According to original ETA, 1-2 weeks to go. ;)

thanks gam...

yeap looking forward for that tubing to arrive :D

[rbsmontemor]

Very nice again :)

Keep going with this watercooling :banana::banana::banana::banana: :D

Rbs.
:wave:

[disruptfam]

Very nice again :)

Keep going with this watercooling :banana::banana::banana::banana: :D

Rbs.
:wave:

rbs ! :D

good to see ya! hehe

[smee]

Looking nice disrupt!!
Can't wait till more updates!!! :D

[killswitch_]

disruptfam looks madd!!

Can not wait to see it finished good work dude :D

[The[R]eaper]

looking good man:up: makes me wanna get one of those cases. cant wait to see it finished.

[Borgod]

Looks awesome mate!!

[disruptfam]

cheers all

ohhh i see more aussie's on here !

coming out the woodwork lol :)

[Jasy]

Looks good. I want to seed the next update ;)

[Borgod]

cheers all

ohhh i see more aussie's on here !

coming out the woodwork lol :)

hehe just lurking ;)
Waiting for the summer heat to pass before getting back into watercooling

41degrees here yesterday!! :eek:

[Talonman]

Stunning job disruptfam...

I think it looks super!! :up:

[BP-Vincent]

Very Very Nice work..After I saw you have SW RAD with our fittings...I need to make notice below,

Who will use our fittings on Swiftech's product line...Need to make sure the seal is in perfect condition ..or add ST transfer adapter between SW and Bitspower's Fittings...

[disruptfam]

Very Very Nice work..After I saw you have SW RAD with our fittings...I need to make notice below,

Who will use our fittings on Swiftech's product line...Need to make sure the seal is in perfect condition ..or add ST transfer adapter between SW and Bitspower's Fittings...

are you saying that the seal is not perfect with swiftech products? I haven't leek tested as of yet

[BP-Vincent]

The design of our compressing fittings are based on G1/4", Swiftech is NPSM...for thread issue they are the same but for sealing, some of our fittings cannot be used directly......it's why we added ST Transfer Adapter for this issue.....Play water have fun but need to be more safe..

[Xilikon]

I think he's talking about the radiator barbs recess. He is right to doubt it can be screwed all the way in the recess without the ST transfer adapter. The recess is just barely large to accept the o-ring holder part of a D-Tek barb and those BitsPower is larger than this from what I see.

[disruptfam]

damn...

Link to the transfer base?

hmm i think i may just use d-tek 3/8 barbs on the rads...

[Xilikon]

If it's concealed, the D-Tek barbs is a great choice with the R-3400. It's very tight and I had a hard time removing ;)

[Masterchief]

do you plan on cutting up the floor for the rad ??? or you just leaving it like so :shrug:

[BP-Vincent]

I think he's talking about the radiator barbs recess. He is right to doubt it can be screwed all the way in the recess without the ST transfer adapter. The recess is just barely large to accept the o-ring holder part of a D-Tek barb and those BitsPower is larger than this from what I see.

You are right...
For our normal fittings, it's no problem but for compression one you may need to add ST Transfer Adapter..

[peebee]

*subscribed* ;)

Best thing you can make!No dye and shiny tubing! I know, what I am talking about. :) There was only one thing I used in my rig and that was Fluorescein. Got it from the Pharmacy. Red powder which reacts UV green in Water. This is much better and does not act as bad as all the dyes.

Well but the glow is gone after about 3-4 months and you must add new Water to get the same results again.

Shiny clear tubing is the best way to keep it clean and tidy. But be sure, that there are no rests of dye and dirt in the other components. :D

[disruptfam]

worklog Update Post 2

[RAID]

drop dead sexy

disruptfam, do you think my 1/2ID 3/4OD bitpower fittings would work on the supreme?

[disruptfam]

drop dead sexy

disruptfam, do you think my 1/2ID 3/4OD bitpower fittings would work on the supreme?

yes they would :D

[Nate P.]

Xtremely nice job!

[disruptfam]

Xtremely nice job!

thank you more updates soon

[Xilikon]

That's great... I cannot wait to see what BP_Vincent will come as solution for the chipset blocks.

[disruptfam]

That's great... I cannot wait to see what BP_Vincent will come as solution for the chipset blocks.

yeah i'm waiting to for bitpower to bring out those off centre barbs,I will need them for my chipset blocks.

Also will need a few transfer base's know anywhere where i can pick some up?

[AndyM]

Cool, single double & triple rads, I like it! I'm loving the top-notch hardware, nice work!

[Janno]

3 rads internally mounted... god, i love this case </envy>

love the sig, too :up:

[disruptfam]

Cool, single double & triple rads, I like it! I'm loving the top-notch hardware, nice work!


3 rads internally mounted... god, i love this case </envy>

love the sig, too :up:

cheers guys...

Things is i could fit even more rads in there still have abit of space to work with.The rads i have there should sufficiently cool my hardware but who doesn't like overkill :rofl:

hey andym?

[LockBreaker]

Its beautiful. :)

How did you get the mirror finish? :)

[LockBreaker]

Its beautiful. :)

Fantastic. :)

[disruptfam]

Its beautiful. :)

How did you get the mirror finish? :)

sanded it 1st

400 600 800 1500 2000 grits

then polished...

alot of work but worth it

[Yeknom]

Disrupt, what camera are you using? Your pics are beautiful.

[disruptfam]

Disrupt, what camera are you using? Your pics are beautiful.

Cannon Powershot S3 IS :D

But even the best camera pics can come out bad... depends on the photographer...

Tri-pod will be your best friend

[.OCX]

The picture quality is awesome, very nicely done on the work too.

For the Rad Grille, have you thought about using Allen Cap screws? They really would compliment your hardware setup, and go nicely with what you've accomplished so far. Not too expensive either.

http://img.alibaba.com/photo/12251402/Socket_Head_Allen_Cap_Screws.summ.jpg

[disruptfam]

The picture quality is awesome, very nicely done on the work too.

For the Rad Grille, have you thought about using Allen Cap screws? They really would compliment your hardware setup, and go nicely with what you've accomplished so far. Not too expensive either.

http://img.alibaba.com/photo/12251402/Socket_Head_Allen_Cap_Screws.summ.jpg

thanks for the tip mate those look good.Do they come in black?

[64dragon]

yea, you should be able to find them in black

keep up the good work. any plans on painting the interior?

[disruptfam]

No,No plans on painting the interior.

I will be polishing other parts of the case though,To get the same mirror finish i have on the middle section. :)

[Xilikon]

I agree with the allen hex screws, they are awesome. It's a :banana::banana::banana::banana::banana: to find tho but I'm sure your city will have a local fasteners distributor you could check. I found mine there and they have a infinite assortment and if they happen to not have a particular one, they can order it within 48 hours ;)

They are probably found in some industrial sectors.

[LockBreaker]

Is next update far away? :) :D

[disruptfam]

may be a lil bit,Waiting on new tubing,second gtx,and a few odds and ends...

Haven't done anything with the case over the weekend been busy.

But hopefully updating the worklog very soon :)

[LockBreaker]

Second GTX you say? :)

Incredible, awsome. :)

I love the way you mounted the MCR-120. It looks so clean. :)

I am really lookin forward to next update mate. Keep on the good work. :)

Dette her er s&#229; r&#229;tt. :D

[.OCX]

I ordered a bunch of 6/32 in different lengths from here (http://www.allensfasteners.com/detail.asp?Product_ID=0168+6-32+X+SHCS+(SS)), but its in the US. I have an excess amount if your interested in 4 of them for free. They are Stainless steel though. :(

Pic of my Grille (http://img252.imageshack.us/img252/8500/lcdposterpt4.jpg) with Stainless Steel on Black. The contrast could compliment your chrome + Black setup you have if you cant find Black Allen Caps.

[disruptfam]

yeah those looks heaps good,I will ask gam if he can source some out for me

cheers

[Pub_Randy**]

those compression fittings look amazing. your doing a fine job so far, looks much more professional :)

yeah those looks heaps good,I will ask gam if he can source some out for me

cheers
Should be able to source them from a hobby shop / fittings & fasteners depot thingy

[LockBreaker]

I just want to say that your images are incredible. You are a true artist with the camera. :)

Where are you going to place the pump? :)

Those Allen Hex are pretty awsome looking. :D

[\/\/ater (ooler]

looking sexy, cant wait to see it finished :up:

[Xilikon]

New pics yet ??

[disruptfam]

Small update on post 2 guys :)

[Sylv]

Wow nice pics/build mate, Brissy has been getting some cooler days recently....definitely WC time :P. Keep up the good work- await next update.

[LogAn'sRun]

nice work!

What raptor mod you talkin' about??? LINKY PLZ!! ;)

[NoobCake]

wow dam "disrupt"... looks so sleek and elegant :)

what tubing are you going to be using? and what size fittings are those? they look damn sexy i want o buy them also

[NoobCake]

are these the fittings/barbs you used?

http://www.gammods.com.au/store/index.php?main_page=product_info&cPath=1_91_104_106&products_id=514

So no matter what you cannot fit them onto the fuzion as the threads are spaced too close?

the ones in the link, did you use them for the microres also?

[disruptfam]

Wow nice pics/build mate, Brissy has been getting some cooler days recently....definitely WC time :P. Keep up the good work- await next update.

Thank you

nice work!

What raptor mod you talkin' about??? LINKY PLZ!! ;)

When put the raptor in the drive bays vertical,making a window so you can see what it's doing


wow dam "disrupt"... looks so sleek and elegant :)

what tubing are you going to be using? and what size fittings are those? they look damn sexy i want o buy them also

Fittings are 3/8 5/8 1/8 wall and i will be using tygon r3400 black tubing same size,also purchased from gam :)


are these the fittings/barbs you used?

http://www.gammods.com.au/store/index.php?main_page=product_info&cPath=1_91_104_106&products_id=514

So no matter what you cannot fit them onto the fuzion as the threads are spaced too close?

the ones in the link, did you use them for the microres also?

Yes same barbs on all my components :up:

[Xilikon]

Looks nice, especially the black PCB GTX. How much did you pay for one ?

I'm considering swapping my ugly green 8800GTS 640MB for a black 8800GTX or 8800Ultra (I already have the extra mosfet plate for the GTX on hand so I can reuse my EK FC8800 block).

[Canine]

I'm looking forward to seeing the final build!! NICE WORK!

[Systemcepe]

Wow it looks so good!

[disruptfam]

Looks nice, especially the black PCB GTX. How much did you pay for one ?

I'm considering swapping my ugly green 8800GTS 640MB for a black 8800GTX or 8800Ultra (I already have the extra mosfet plate for the GTX on hand so I can reuse my EK FC8800 block).

Got is off ebay under $300 aud


I'm looking forward to seeing the final build!! NICE WORK!

Cheers mate coming along slowly will be finished in a few weeks i'm hoping


Wow it looks so good!

thank you :up:

[ShArKo]

vary nice work dude.........Im jealous of your work....

I would like to have here in argentina those water blocks..... But only a got swiftech system.... :(

[oerekum]

Great mounting idea for those reservoirs! Never thought of that, might have to steal that sometime =D

[LockBreaker]

I was just wondering how you mounted your radiators in your previous setup? I mean the first tri-loop you made. :)

[Gogeta]

This makes my air-cooled V2000 look worthy for the boneyard...

Can't wait to see final pics.

[disruptfam]

vary nice work dude.........Im jealous of your work....

I would like to have here in argentina those water blocks..... But only a got swiftech system.... :(

Cheers mate,try petras he ships international


Great mounting idea for those reservoirs! Never thought of that, might have to steal that sometime =D

Go for it.it's just using the supplied brackets and being a lil creative


I was just wondering how you mounted your radiators in your previous setup? I mean the first tri-loop you made. :)

Ontop of eachother on there side.


This makes my air-cooled V2000 look worthy for the boneyard...

Can't wait to see final pics.

lol thanks mate

[LockBreaker]

Thanks for the replay mate! :D

Love your build! :D

Did you just mount them on top of each other? I'm not shure if I fully understand. Did you just screw them to the sidedoor or how did you ? :)

[p0tter]

Just wanted to comment on how well organized and thoughtout your project is and it shows.

[peebee]

Hey mate! whassup? Everything fine? :cool:

Waiting for new pics ;)

[disruptfam]

Thanks for the replay mate! :D

Love your build! :D

Did you just mount them on top of each other? I'm not shure if I fully understand. Did you just screw them to the sidedoor or how did you ? :)

No i didn't have to screw them into anything it was such a tight fit that it held .

Just wanted to comment on how well organized and thoughtout your project is and it shows.

Thank you :)

Hey mate! whassup? Everything fine? :cool:

Waiting for new pics ;)

More updates 2morow :up:

[awhir]

morw pics pls :)

[RockfordFosgate]

New Pccy's pleaseeeee:D:D:D

[NOFX]

Look's really cool! :hump:

[YanBooth]

Beautiful work, very inspirational, keep up the great work!
I would love to see more pictures that show how you did the triple rad in relation to everything else, it would be wonderful to feast my eyes on your wonderful work.
I am considering that Lian Li model myself, but with two triple rad loops, but I do not know if that will fit properly, so I'm very eager to see how others have done their setups.
Good luck!
-Jan

[Patriote]

ahhhh! That looks amazing m8. "Everything looks great when it comes in 3!" That's funny m8 :D

PS: I am thinking of buying a Lian-Li V2000B Plus II in Black, 2 Scythe Fan controllers, some Orange and Yellow fluid, maybe 2 MCRES and re-loop all my stuff into that case. Kinda would be cool i think. Might need some help with that case. I will have to fit a PA120.3 and a PA120.2 in it Heh.

Anyway, really, m8, your rig will be the tri-loop sh*t! :D Keep it up!

[LockBreaker]

Did you use Swiftech radiators in your first build? :)

Sorry for all the odd questions, but I have a Lian Li PC-V2100 case and I am thinking about mounting it the same way as you did first time. :)

Your pics are so great. :D

Love your build. :D

[\/\/ater (ooler]

Did you use Swiftech radiators in your first build? :)

Sorry for all the odd questions, but I have a Lian Li PC-V2100 case and I am thinking about mounting it the same way as you did first time. :)

Your pics are so great. :D

Love your build. :D

correct me if im wrong disruptfam but i think the first time he used magicool rads and the mcr wont fit the same way because its just a tad larger (i tried)

[LockBreaker]

I think you have something there buddy! :)

Then I just have to find another solution, or anothe radiator that fits. :)

The height of the bottom chamber, is about 24.5 cm. The MCR-Rads are about 12.8. I need a radiator that's 11.7 cm. :p:

Where can I get one of those? :)

Sorry for the Off Topic, I'll delete this post if you don't like it. :)

Think I'll start up a different thread . :)

Lookin forward to next update! :D

[\/\/ater (ooler]

you can fit two mcr320s in the bottom section but not ontop each other, you can do it in front of each other (check out my build you will see what i mean) sorry for the (off topicing :p lol)

[Waterlogged]

I think you have something there buddy! :)

Then I just have to find another solution, or anothe radiator that fits. :)

The height of the bottom chamber, is about 24.5 cm. The MCR-Rads are about 12.8. I need a radiator that's 11.7 cm. :p:

Where can I get one of those? :)

Sorry for the Off Topic, I'll delete this post if you don't like it. :)

Think I'll start up a different thread . :)

Lookin forward to next update! :D

I think that's going to be a bit of a problem as that's smaller than a 12CM fan :p:

[ShArKo]

more pics more pics please............:D:D:D:D:D:D:D

[disruptfam]

more pics more pics please............:D:D:D:D:D:D:D

ok :up:

SMALL UPDATE POST 2 GUYS!

I can separate the post's if youse like.The pic's are really starting to rack up.

[perfection]

Please FINISH the build!!!!! quickly! :D

i can't wait to see how it turns out

[disruptfam]

Look's really cool! :hump:

thank you


Beautiful work, very inspirational, keep up the great work!
I would love to see more pictures that show how you did the triple rad in relation to everything else, it would be wonderful to feast my eyes on your wonderful work.
I am considering that Lian Li model myself, but with two triple rad loops, but I do not know if that will fit properly, so I'm very eager to see how others have done their setups.
Good luck!
-Jan

Cheers


ahhhh! That looks amazing m8. "Everything looks great when it comes in 3!" That's funny m8 :D

PS: I am thinking of buying a Lian-Li V2000B Plus II in Black, 2 Scythe Fan controllers, some Orange and Yellow fluid, maybe 2 MCRES and re-loop all my stuff into that case. Kinda would be cool i think. Might need some help with that case. I will have to fit a PA120.3 and a PA120.2 in it Heh.

Anyway, really, m8, your rig will be the tri-loop sh*t! :D Keep it up!

thanks pat!!


Please FINISH the build!!!!! quickly! :D

i can't wait to see how it turns out

Only thing holding me back now are parts,Waiting on ultra x3 1000w and few other small bits and piece's screws,bolts,lighting abit of this and that.

Hoping to get a fair bit of stuff late this week or early next week.

[\/\/ater (ooler]

waiting for parts is very frustrating isn't it? :down:

lets see who will beat it to the punch first :p:

btw you rig is AMAZING i cant wait to see it finished :up:

[Patriote]

Wow love it man, keep up the good job!

Love how you mounted the 3 MCRES!

[septim]

wow, you've been busy disrupt, its been almost a month that i've not checked on this, and now i see you've nearly completed you're rebuild. keep it up!...

[[XC] NetburstXE]

Wow this is amazing! All of the EK blocks look awesome! I want MORE PICS.

[disruptfam]

Wow love it man, keep up the good job!

Love how you mounted the 3 MCRES!

cheers mate,Ordered 1 more bracket to get it straight.


wow, you've been busy disrupt, its been almost a month that i've not checked on this, and now i see you've nearly completed you're rebuild. keep it up!...

Yeah it's coming along not as fast as i would like but it's getting there :)


Wow this is amazing! All of the EK blocks look awesome! I want MORE PICS.

Yeah i love these ek blocks.Full set to!!!

[crackbag]

i was just looking at your old rig and rember talk you along time ago alsmot a year now, anywho your updated rig is great man! huge improvement from yoru 1st build! and love the set up! I almost bought that case for this next build then the 343b came in stock woohoo!! anyways great build man great pics!

[teko]

I found some compression fittings that might fit the fuzion here (http://www.aquatuning.de/product_info.php/info/p3357_13-10mm--10x1-5mm--Anschraubt-lle-AG-1-4.html) but they arent as pretty as the bitspower ones :( My German is pretty lousy, but as far as I can figure out, they are 16mm wide but as I currently doesn't own a fuzion, I'm unable to meassure if that is too wide to be able to screw them in?

[Waterlogged]

I found some compression fittings that might fit the fuzion here (http://www.aquatuning.de/product_info.php/info/p3357_13-10mm--10x1-5mm--Anschraubt-lle-AG-1-4.html) but they arent as pretty as the bitspower ones :( My German is pretty lousy, but as far as I can figure out, they are 16mm wide but as I currently doesn't own a fuzion, I'm unable to meassure if that is too wide to be able to screw them in?

Using Babelfish to translate, I'm under the impression that those will fit. I posted pics elsewhere of a FuZioN with 10/8 comps on it and those fittings I used also have 16mm wrench flats on them.

[teko]

As soon as I get the time, I'll order some and a Fuzion and test it :)

[teko]

Seems like the feser 3/8 compression is 3/8 - 1/2 in size, so that should fit as well..

[disruptfam]

i was just looking at your old rig and rember talk you along time ago alsmot a year now, anywho your updated rig is great man! huge improvement from yoru 1st build! and love the set up! I almost bought that case for this next build then the 343b came in stock woohoo!! anyways great build man great pics!

cheers mate


I found some compression fittings that might fit the fuzion here (http://www.aquatuning.de/product_info.php/info/p3357_13-10mm--10x1-5mm--Anschraubt-lle-AG-1-4.html) but they arent as pretty as the bitspower ones :( My German is pretty lousy, but as far as I can figure out, they are 16mm wide but as I currently doesn't own a fuzion, I'm unable to meassure if that is too wide to be able to screw them in?

Decidied on the ek supreme :D


As soon as I get the time, I'll order some and a Fuzion and test it :)

cheers


Seems like the feser 3/8 compression is 3/8 - 1/2 in size, so that should fit as well..
nice!

[otisthecat]

great work,inspired my to finish mine

[Anemic]

:shocked:
Great work!! Keep those pictures comming!

[septim]

then we'll say time for a new case... a77? hehehe probably cube case next, or DIY... something along VirtualRain's last build...

[SorgKhan]

Hello i was checking the test of gtx280 by kingpin when i saw this post.

I register myself to give you and advice, in france we have a e shop called docmicro and they sell a beautiful product for your amazing rig ^^

I don't know the word in english but it's something to link two wb for sli, i use it for 1 slot spacing but it exists in 2 and 3 slots

You can found it in the near middle of this page (http://www.docmicro.com/categories/watercooling_Embouts-Autres_287_78.html)

I want to say that i'm not working for this shop ^^

It's just to help you having an amazing rig, because your project is really beautiful.

http://www.docmicro.com/images/pieces/Koolance_ConnSLI2.1.jpg

I think you can find this koolance product where you live

Best regards

And like all the frenchies on an english forum : sorry for my english

[disruptfam]

hey mate,

i was actually looking @ these today :)

http://www.aquatuning.de/images/product_images/info_images/2958_3.jpg

I'm going to order a pair

cheers mate..

I should be getting some fittings tomorrow so look for a update then!!!

[nsidious]

always oustanding work keep it up!

[RockfordFosgate]

We want update disruptfam :D:D:D

[disruptfam]

SMALL UPDATE:

:up:

My hd pump bracket.got a lil creative

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc030.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc035.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc032.jpg

got some of fittings i need Alot more to come. :)

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc036.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc038.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc040.jpg

Chucked my g-skill into my lan and seeing how dom ddr2 ram is cheap as chips these days got 2gb (with another 2gb on the way)

http://i212.photobucket.com/albums/cc30/disruptfam/lanpc044.jpg



thats all for now.More in a couple hours :)

cheers

[The[R]eaper]

woot! an update. :D

how do you like those bitspower fittings? i was thinking about getting some but in 1/2"ID 5/8"OD or the new 1/2" koolance ones.

anyways the build or rebuild is looking great:up:

[leo_bsb]

what size is that bitspower? Do you think those will fit a MCW60 gpu block? It seems they are too wide for a fuzion too.

[Giannis86]

pimpin as always disrupt..seriously cant wait for more pics

a comment to your HDD-Laing mount..i hope the HDD +pump vibrations wont make annoying noises...or have you applied some kind of solution just in case such a problem appears?

[disruptfam]

eaper;3070552']woot! an update. :D

how do you like those bitspower fittings? i was thinking about getting some but in 1/2"ID 5/8"OD or the new 1/2" koolance ones.

anyways the build or rebuild is looking great:up:

bitspower fittings are great! comes down to personal preference i think you like both.


what size is that bitspower? Do you think those will fit a MCW60 gpu block? It seems they are too wide for a fuzion too.

using 3/8 5/8 1/8 fittings will fit on a mcw60 if you get the st transfer fitting


pimpin as always disrupt..seriously cant wait for more pics

a comment to your HDD-Laing mount..i hope the HDD +pump vibrations wont make annoying noises...or have you applied some kind of solution just in case such a problem appears?

i do have rubber grommets under each screw so hoping that will do it.But if not i will have to come up will something else.Im sure i could figure out something :)

thanks for the comments guys.

[evil-98]

lol, wow compressions on the fillports! envy! i only have 2 :(

[disruptfam]

lol, wow compressions on the fillports! envy! i only have 2 :(

Lol that was just to show what it looks like.I using regular d-tek or ek barbs on the fillports

:up:

[manyga]

Amazing work!

Subscribed!

regards!

[xTKxhom3r]

wow you have some crazy picture taking skills bro very nice build

[disruptfam]

wow you have some crazy picture taking skills bro very nice build

cheers

Ok mounted the hd pump cage, did some cables,working on 3rd pump position.I got alot fittings that i need and will be ordering them asap.

http://i212.photobucket.com/albums/cc30/disruptfam/newpicpc009.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpicpc011.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpicpc012.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpicpc013.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpicpc014.jpg

http://i212.photobucket.com/albums/cc30/disruptfam/newpicpc023.jpg

Yes i do realize the hd cage is not straight. lol not screwed yet

To do list:

Order the remaining fittings i need.
Order aquareo
Get manual hole punch.
Install fillports.
cable management
order u-channel molding
plumb system etc etc

[NoobCake]

looks good mate,

What happened to your micro Res?

[Giannis86]

finally more pics^^
are you going to place the HDD cage there or are you having other ideas?

[evil-98]

do you really need all the fan grills? i think vapor said it once but those grills are actually quite restrictive

i dont use them anymore, just on externally mounted fans because of peoples curiosity lol

but its looking good so far, i like how the contrast in colors between case and parts very interesting to look at

[Anemic]

Looking great!!

[pcaddict]

looks nice, subscribed!

[disruptfam]

looks good mate,

What happened to your micro Res?

I sent them over to b@llzor for some tapping action :)


finally more pics^^
are you going to place the HDD cage there or are you having other ideas?

Yeah thats where i'm putting it.Do have a better placement for the hd's?


do you really need all the fan grills? i think vapor said it once but those grills are actually quite restrictive

i dont use them anymore, just on externally mounted fans because of peoples curiosity lol

but its looking good so far, i like how the contrast in colors between case and parts very interesting to look at

I personally like the fan grills.I tend to muck around with my pc on so no cut fingers for me.


Looking great!!

cheers mate


looks nice, subscribed!

thanks

For some reason the pics came out really crappy... when i hosted them??

i will try again.

More soon!

[Giannis86]

Do have a better placement for the hd's?


yeah. anyway maybe it would be a good idea to also put rubber grommets when connecting the HDD cage to the case, or some kind of noise absorption pad in between (IF you get nose problems:D)

cant wait to see this beast finished:D

[Malik]

disruptfam could you show me one thing - how have you hide main cable from psu to mobo :) Maybe some pics from behind how thats looks ? :)

[disruptfam]

yeah. anyway maybe it would be a good idea to also put rubber grommets when connecting the HDD cage to the case, or some kind of noise absorption pad in between (IF you get nose problems:D)

cant wait to see this beast finished:D

good idea cheers mate :D tbh thats the only place i can fit the hd's either that or the drivebays...but i i will have a raptor x in the drive bays.


disruptfam could you show me one thing - how have you hide main cable from psu to mobo :) Maybe some pics from behind how thats looks ? :)

i will take a pic for ya :)

[xTKxhom3r]

wow i love your build how much has it come out to in total?(just watercooling stuff)

[disruptfam]

wow i love your build how much has it come out to in total?(just watercooling stuff)

im not exactly sure i probably don't want to add it up tbh :rofl:

[Pellepel]

im not exactly sure i probably don't want to add it up tbh :rofl:

Hehe so true...anyhow damn I love those compression fittings! and you have an awesome build too its sooo clean with the bling bling:eek: nice pictures too!:up::up:

[yankee]

Looks amazing, bro. I really love the polished deck below the motherboard. The reflection is awesome. Can't wait to see another lian- li beauty finished!

[Fragger]

I would put a metal plate under your bottom HDD in the cage to stop it from being blasted with hot air from the rad, proabably not that good for it in the long run, just a thought.

[64dragon]

lookin good man, keep it up :up:

[disruptfam]

Hehe so true...anyhow damn I love those compression fittings! and you have an awesome build too its sooo clean with the bling bling:eek: nice pictures too!:up::up:

cheers mate :up:


Looks amazing, bro. I really love the polished deck below the motherboard. The reflection is awesome. Can't wait to see another lian- li beauty finished!

Thanks mate i also polished next to the mobo and polishing the drive bays atm. :)


I would put a metal plate under your bottom HDD in the cage to stop it from being blasted with hot air from the rad, proabably not that good for it in the long run, just a thought.

nice idea.I'll give it some thought cheers


lookin good man, keep it up :up:

cheers mate.

Order all the stuff i need to finish it off.Just gotta wait to receive it all ...

More updates then!

oh btw.I put a order in for the nikon d60 :) upgraded from the canon s3 i have been using!

Woohoo can't wait!!

[evil-98]

you wont regret it lol, im having so much fun with mine

looking forward to some nice pics + updates!

[disruptfam]

you wont regret it lol, im having so much fun with mine

looking forward to some nice pics + updates!

cheers evil i was hoping to see some pics mate :)

mind taking some of your pc? :D

what lens did you get with it?

[evil-98]

cheers evil i was hoping to see some pics mate :)

mind taking some of your pc? :D

what lens did you get with it?

i did, its in the homewrecker v2 thread :up: they were up yesterday


i ordered though amazon, the actually company name is 17th street photo
and i couldnt resist, price was too good $799 for the D60, AF-S DX NIKKOR 18-55mm f/3.5-5.6G VR, and a AF-S DX VR Zoom-NIKKOR 55-200mm f/4-5.6G
plus 2 dvd for noobs :up:

the lens alone total to $189.95 + $229.95 = $420 and
depending on where you shop the body is around $550+
so i say fair deal :up:

[Pellepel]

i did, its in the homewrecker v2 thread :up: they were up yesterday

You guys have amazing photography skills :up:whats your secrete? :)

[disruptfam]

i did, its in the homewrecker v2 thread :up: they were up yesterday

ahhhhh cheers mate :D

[LockBreaker]

I don't know, but wouldn't it been better if you made your own HDD-cage out of plexiglass or something? A friend of mine did that, and it turned out just great. :)

Just heat up the plexi carefully and bend it. It's a pretty simple operation. Would give your project a nice touch, at least I think that way. :)

But your build is amazing, awsome and things that better are. Amazing work mate! :D

Cheers! :)

[dualbrain]

disrupt: I love it so much :D ... all the years of fun :D

[disruptfam]

disrupt: I love it so much :D ... all the years of fun :D


Lol :D yeah its taking way too long.But i can't help it. :(

[disruptfam]

Ok been mucking around in sketchup.I'am by no means a expert,just dled it tbh lol....


What do think of this?

I can change it and suggestions are MORE than welcome.

http://i212.photobucket.com/albums/cc30/disruptfam/mev2000.jpg

The symbol on the side panel will be lasercut.

Its still a work in progress

[disruptfam]

Or.....

http://i212.photobucket.com/albums/cc30/disruptfam/v2000rev11.jpg

The symbol lasercut in the front.

The 1st slot in for the aquareo,The hole is the raptor X window and the 3rd slot is for the dvd drive

Disruptfam will be lasercut out aswell.In red so you are able to see it

[septim]

tyen, sky or heaven... do both...

[disruptfam]

Was actually going for demon.

http://i212.photobucket.com/albums/cc30/disruptfam/demon.gif

But as you can see thats a lil hardcore

so my inspiration

http://i212.photobucket.com/albums/cc30/disruptfam/i250154243_23830.png

[septim]

very nice, combo of acrylic or simply air brush to perfection...

[disruptfam]

I was thinking...

Black alu plate @ the front.Lasercut

And black acrylic on the drive bays.With tri-loop or something lasercut or etched in.

http://i212.photobucket.com/albums/cc30/disruptfam/rev12.jpg

[septim]

whichever is more available in your area i guess...

here acrylic is nearer to my place, and i need to practice some dremel carving anyways...
i don't have anyone close with laser machine...

[disruptfam]

whichever is more available in your area i guess...

here acrylic is nearer to my place, and i need to practice some dremel carving anyways...
i don't have anyone close with laser machine...

yeah fair enough,There's a laser cutting place in my area which is handy :D

Thinking maybe something like this?

http://i212.photobucket.com/albums/cc30/disruptfam/rev13.jpg

:up:????:down:????

[kinghong1970]

hmm.... asian characters look much better when done with a certain flow of calligraphy...

go to chinatown and find someone to write what you want... but with more flair... not the stock fonts you find in the web...

just my 2 cents...

dude... you're still not done?
well, i guess i should not talk... ha ha ha

[disruptfam]

hmm.... asian characters look much better when done with a certain flow of calligraphy...

go to chinatown and find someone to write what you want... but with more flair... not the stock fonts you find in the web...

just my 2 cents...

dude... you're still not done?
well, i guess i should not talk... ha ha ha

Yeah of course,

Just wanted to give you guys an idea of what i'am going for.

where is that stacker anyways kinghong?

[kinghong1970]

pfft... last i checked it was sitting in my garage...
putting that 160 up on top is tougher than i thought...

but gonna get back to it...

nice work bro!!!

[septim]

yah we all have our year long projects...

go for Chinese character Dragon...

[b@llz0r]

looking good!

im impressed with your sketchup skillz after 1 day at it... try file>export instead of screencap tho

how about using the grafiti style like in your avatar for the disruptfam?

[disruptfam]

looking good!

im impressed with your sketchup skillz after 1 day at it... try file>export instead of screencap tho

how about using the grafiti style like in your avatar for the disruptfam?

Yeah!!! good idea why didn't i think of that?

:up:

[disruptfam]

Edit:

*build Incomplete*

[MomijiTMO]

So what is your next build going in? New case? What are you going to do with this case? Are you going to whack together what you can and sell it off?

Whatever path you choose, best of luck to you. :)

[Giannis86]

that sucks..this was a very interesting project to watch..

I hope you sort your problems out..

[disruptfam]

So what is your next build going in? New case? What are you going to do with this case? Are you going to whack together what you can and sell it off?

Whatever path you choose, best of luck to you. :)


that sucks..this was a very interesting project to watch..

I hope you sort your problems out..

I will be selling all the components,bar the case.So not the end of the world.i doubt anyone would want or could afford a tri-loop v2000 system in Brisbane ;p

:up: this v2000 will be back or will it hmmmmmmmmmmmmm

[MomijiTMO]

So is your main rig your lan build? It will hold you out til Nehalem launches :).

[disruptfam]

So is your main rig your lan build? It will hold you out til Nehalem launches :).

Yes my lan build will keep my company for time being.After i sought out some cash flow problems will be saving up for a nehalem/x58/4870x2 combo :D

[Yeknom]

what parts are in it? *interested*

[disruptfam]

q6600,680i ek wb set,2 x 8800gtx fc ek blocks,dominator ram........ assorted of watercooling gear look @ 1st page

[Breezyjr]

What do you need?
There may just be someone here who wants to see your build finished.....

Let me know, and I'll see what I can do for ya. Especially, if it's stuff you can buy at someplace like Petra's where they ship overseas....

later,
breezyjr

Send me an email... breezyjr at gmail d0t c0m I'll see what I can do for ya...

[The[R]eaper]

no v2000 tri-loop? noooooooooo..... :(

anyways do whatcha gotta do man. lovin' the lan build by the way.

[Dangals]

Sorry to hear about the build - was looking really good...

I pm'd you about the parts (the missus is bugging me to build her a PC).

[disruptfam]

Yeah I'm very disappointed as well, i really wanted to finish it off,but with the death of my mobo and several other major problems.I just can't afford to.

cheers fellaz thanks for all the support