Need Info on Biostar TA 770

[Little-Iron]

Hello, I sure would APPRECIATE to know if this board works well with a 500 to 5400 Black box? I heard of some trouble ,but I think it was with the AMD quads. Any advise on set up + a good memory brand for this board?
a 4-4-4-4 12 c4 would be great ! Menory needs to be able to OC . I'll be useing 1 older Sata 150 series -160 gig drive . I realy need some advise-PLEASE>>>

[gOtVoltage]

Hello, I sure would APPRECIATE to know if this board works well with a 500 to 5400 Black box? I heard of some trouble ,but I think it was with the AMD quads. Any advise on set up + a good memory brand for this board?
a 4-4-4-4 12 c4 would be great ! Menory needs to be able to OC . I'll be useing 1 older Sata 150 series -160 gig drive . I realy need some advise-PLEASE>>>


Works just fine with 5000+BE and 6400+ BE...Good overclocking 300fsb+

The Mod Bioses for the TA770 should be used with PHENOMS ONLY...

The 125.BST BiostarBios works for X2's the best..Also TA770 can go well above 300+fsb easily...

Good bang for the Buck for any X2...:yepp:

Note: make shure the Sata is set to IDE...This does not slow it down...It how its suppose to be set unless running RAID.

Stay away from the 116.BST Bios it was plaged with problems and since has been removed from BIOSTAR UPDATES...USE the 125.BST for X2's

[Little-Iron]

Works just fine with 5000+BE and 6400+ BE...Good overclocking 300fsb+

The Mod Bioses for the TA770 should be used with PHENOMS ONLY...

The 125.BST BiostarBios works for X2's the best..Also TA770 can go well above 300+fsb easily...

Good bang for the Buck for any X2...:yepp:

Note: make shure the Sata is set to IDE...This does not slow it down...It how its suppose to be set unless running RAID.

Stay away from the 116.BST Bios it was plaged with problems and since has been removed from BIOSTAR UPDATES...USE the 125.BST for X2's

A big Thanks to YA

[Ugly n Grey]

I agree with everything said, This board takes my 5000 BE up quick nicely and OC's the RAM quite nice. with a x2 stick to Biostar most recent BIOS. And you DO need to use that new BIOS, flash it ASAP.