View Full Version : MCW50-T on NF7-S NB
2fast4u
08-14-2003, 06:08 PM
Had to do a little mod to make this thing work!
Tedinde
08-14-2003, 06:11 PM
How much did it help your max FSB??
2fast4u
08-14-2003, 06:38 PM
I could'nt get over 210 stable before pelt. Now @ 230fsb 1.95v w/vdd mod totaly stable. My mem is holding me back now and I am going to to vdimm mod this weekend to see how far it will go. Might be able to go a little higher without it but I like to keep the timings tight.
2fast4u
08-14-2003, 06:42 PM
Here is a shot.
2fast4u
08-14-2003, 07:05 PM
Temps are not to good though. Might have to go to 172w pelt to get much farther. Left is room temp. Right is NB temp. This prommie and heater core realy warm up the room. I gotta get a window unit in here soon! By the way, I just got my new digital camara today, so you all are my guinne pigs!
IamAnoobieCheez
08-14-2003, 08:29 PM
First of all, nice mod. :) I like the way you have modded your swifty pelt to the NB.
Second, I am concerned why your NB temperature is so high with the peltier block running. It's either not making a good contact or something else is wrong. You can't be getting 75F. :( Could you check your installation again maybe?
2fast4u
08-14-2003, 08:52 PM
It could be the probe placement also. I had it mounted on a 7N400 Ultra Pro before this rig and the swifty was able to set on the NB in the correct orientation to the chip. The socket on this board is turned 90 deg so I had to mod the block to fit with the prommie but did not move the probe that is attached to the bottom of the cold plate. I still think it is running a bit warm because of the high room temp. The heater core is pretty warm to the touch.
2fast4u
08-14-2003, 08:56 PM
I also don't know the accuracy of the probe. I am just comparing it to the ambient probe and think there should be a bigger differential in temps.
IamAnoobieCheez
08-14-2003, 09:07 PM
ah ok.
well, obviously you've got some great gain FSB overclocking there. :)
2fast4u
08-14-2003, 10:00 PM
Yeh, but I always want a little more!
Stang_Man
08-26-2003, 08:36 PM
jason, i bet he's not running chilled water..
Weapon
08-26-2003, 10:17 PM
nice modding on the mount. :thumbsup:
I was tempted to use the swiftie and then I just got downright silly and bolted a maze 2-1 with an 80 watt peltier to my northbridge...a little dremel action on the coldplate and it fit right on that sucker...
http://www.cox-internet.com/weapon/images/sv%20close%201.jpg
:D
Lord Nemesis
08-29-2003, 08:09 AM
anyone tried putting an mcw50-t on nb of a p4c800e dlx, or any other p4 board?
saaya
08-29-2003, 08:23 AM
macci has a 30W tec on the nb of his 875 board iirc... cooled with chilled water.
Lord Nemesis
08-30-2003, 04:02 AM
with the MCw50 block???