Naja002
12-24-2007, 09:04 PM
Hi Everybody,
I'm going to wc this case: Lian Li 300-V (http://www.boxgods.com/dept/htpc-sff/index.php?Action=Article&ID=212&Page=1)--There's 4 pages of pix...
I don't have the case yet, so taking actual measurements isn't possible. I can think of 3 different possible ways to install a 120.2 into that case internally.
I intend to cut out the bulk of both side panels, cover the openings with mesh and install a 120mm fan on each side. Also, hoping the PSU will go in upside-down--If so, I'll make a blow hole through the top for its exhaust. So, air ventilation should be good...
What I am needing help with is the capability of the rad (and overall wc system) v. the electronics. So far things look like this:
3/8ID Tubing and fittings
Apogee GT
MCW30
MCP-350 (22psi, manufacture date 12/04--assume DDC-1 9w..?)
Single 5.25" Bay Res.
Unknown rad
P4 3.2C
Intel D865GLC
120g PATA HD
I'm not a gamer, don't do intensive video, etc. Just basically do a lot of surfing.
I have everything above, so that's what I've got to work with....
Would appreciate some input on a good 120.2 for that particular setup. I'm not looking to spend the most--or the least--just wanting a rad that will handle the load without spending a lot of extra $$$....:p:
Also, thoughts on multiple 120.1s would be Good....:yepp:
TIA :up:
EDIT: In this pic (http://www.boxgods.com/global/func/displayimg.php?IMG=articles/A212-9.jpg&Dept=HTPC-SFF&Title=Review: Lian-Li PC-V300) it looks like it would probably be easier to mount 2x 120.1 (1 on each front 120mm fan)---any thoughts on this or the rads for the job....?
I'm going to wc this case: Lian Li 300-V (http://www.boxgods.com/dept/htpc-sff/index.php?Action=Article&ID=212&Page=1)--There's 4 pages of pix...
I don't have the case yet, so taking actual measurements isn't possible. I can think of 3 different possible ways to install a 120.2 into that case internally.
I intend to cut out the bulk of both side panels, cover the openings with mesh and install a 120mm fan on each side. Also, hoping the PSU will go in upside-down--If so, I'll make a blow hole through the top for its exhaust. So, air ventilation should be good...
What I am needing help with is the capability of the rad (and overall wc system) v. the electronics. So far things look like this:
3/8ID Tubing and fittings
Apogee GT
MCW30
MCP-350 (22psi, manufacture date 12/04--assume DDC-1 9w..?)
Single 5.25" Bay Res.
Unknown rad
P4 3.2C
Intel D865GLC
120g PATA HD
I'm not a gamer, don't do intensive video, etc. Just basically do a lot of surfing.
I have everything above, so that's what I've got to work with....
Would appreciate some input on a good 120.2 for that particular setup. I'm not looking to spend the most--or the least--just wanting a rad that will handle the load without spending a lot of extra $$$....:p:
Also, thoughts on multiple 120.1s would be Good....:yepp:
TIA :up:
EDIT: In this pic (http://www.boxgods.com/global/func/displayimg.php?IMG=articles/A212-9.jpg&Dept=HTPC-SFF&Title=Review: Lian-Li PC-V300) it looks like it would probably be easier to mount 2x 120.1 (1 on each front 120mm fan)---any thoughts on this or the rads for the job....?