Talonman
12-23-2007, 06:45 AM
I still am trying to get this G11 UV Blue ratio thing straight in my head.
So far, I think I have used about 1/2 a gallon, or 64 fl oz of distilled water in my loop. After adding in the section that will have the blocks connected too, I expect to be close to using 3/4 of a galon, or 96 fl oz of distilled water in my loop. (I have long tubing involved so most will not use this much water.)
The G11's instructions recomends a mix of 1:9 with distilled water.
One ninth of 64 is 7.111111 fl oz.
Does that mean that 1/2 a gallon of distilled water takes almost two full bottles of G11? That doesn't seem correct?
The entire bottle of G11 is only 4 fl oz.
I guess a 4 oz bottle, makes about 40 oz of fluid. That would be A 10% ratio.
My 1/2 a gallon is 64 fl oz, so I guess I can go for the full bottle or more 'by the book' if I wish, and still not exceed the recomended amount?
I do have two bottles of the stuff, but that just seemes like way too much die to add into my loop?
I am aware that I will take a small performance hit, with every drop I add, so I don't want to go too crazy.
Being that is is my first water loop, and I have the window in the PC and all, I do want color in the loop this time. Mabey next round I will run distilled only and swap to colored tubing or something and go for pure performance? I do want a decent blue water this time around.
I'm ready to see some color now...
I started slow, and proved that 1/4 of 1 bottle of G11, in 1/2 a gallon of distilled is NOT enouigh. ;)
The color did change, but it is still so light you might as well run straight distilled. You had to mostly imagine it.
Going to a half a bottle of G11 for color reevaluation!!
I believe the PT Nuke worked fine, and will hold at 1 drop status. :)
Half a bottle report: Looks better. Easy to tell it's colored. Small amount of foam, but I hear it is normal for a while...
Everything is looking pretty darn good. I am holding here pending advice.
Do most of you G11 guys go for the full bottle or more, if you have a rather large loop like mine?
NOTE: Picture is not showing the G11, just the loop for size referance.
http://img267.imageshack.us/img267/4095/pic082eg2.jpg (http://imageshack.us)
So far, I think I have used about 1/2 a gallon, or 64 fl oz of distilled water in my loop. After adding in the section that will have the blocks connected too, I expect to be close to using 3/4 of a galon, or 96 fl oz of distilled water in my loop. (I have long tubing involved so most will not use this much water.)
The G11's instructions recomends a mix of 1:9 with distilled water.
One ninth of 64 is 7.111111 fl oz.
Does that mean that 1/2 a gallon of distilled water takes almost two full bottles of G11? That doesn't seem correct?
The entire bottle of G11 is only 4 fl oz.
I guess a 4 oz bottle, makes about 40 oz of fluid. That would be A 10% ratio.
My 1/2 a gallon is 64 fl oz, so I guess I can go for the full bottle or more 'by the book' if I wish, and still not exceed the recomended amount?
I do have two bottles of the stuff, but that just seemes like way too much die to add into my loop?
I am aware that I will take a small performance hit, with every drop I add, so I don't want to go too crazy.
Being that is is my first water loop, and I have the window in the PC and all, I do want color in the loop this time. Mabey next round I will run distilled only and swap to colored tubing or something and go for pure performance? I do want a decent blue water this time around.
I'm ready to see some color now...
I started slow, and proved that 1/4 of 1 bottle of G11, in 1/2 a gallon of distilled is NOT enouigh. ;)
The color did change, but it is still so light you might as well run straight distilled. You had to mostly imagine it.
Going to a half a bottle of G11 for color reevaluation!!
I believe the PT Nuke worked fine, and will hold at 1 drop status. :)
Half a bottle report: Looks better. Easy to tell it's colored. Small amount of foam, but I hear it is normal for a while...
Everything is looking pretty darn good. I am holding here pending advice.
Do most of you G11 guys go for the full bottle or more, if you have a rather large loop like mine?
NOTE: Picture is not showing the G11, just the loop for size referance.
http://img267.imageshack.us/img267/4095/pic082eg2.jpg (http://imageshack.us)