View Full Version : Venice and prommy
Cow2kie
10-22-2007, 08:15 PM
Well I finally got around to hooking up my prommy again. I haven't had it hooked up since my old axp chip. The first night I hooked it up I was having trouble getting it past what I was running on air.. but I kept tinkering away.. couple days later and here is what ive got to so far. I havent tried further.. will keep ya updated!
LC_STiK
10-23-2007, 02:47 AM
Hey, looking good so far. I'll be checking out the updates.
The Legend
10-23-2007, 10:25 AM
Anything over 3.0 on a Venice is a job well done. :)
Athens[2004]
10-23-2007, 10:28 AM
:D memor1es <3
http://valid.x86-secret.com/show_oc?id=44934
mad_skills
10-23-2007, 11:40 AM
that's a nice one there...;)
Cow2kie
10-23-2007, 02:05 PM
Here is a little prime action for people who like prime.
Gothic
10-24-2007, 12:51 AM
pretty nice! wich temps under load?
Looks like you've got one of those who like some negative temps!
whats kind of clocks do you get with 1.65v vcore?
Good job!
s7e9h3n
10-24-2007, 10:32 AM
That particular stepping should be able to go as cold as your prommy will take it. PUSH the Vcore....1.4 is nothing for that chip ;) ....
http://img318.imageshack.us/img318/4196/3716cpuz4gf.jpg
Cow2kie
10-24-2007, 03:55 PM
For some reason cpuz stops reporting my vcore after a certain amount. I'm using 1.71. Idle my chip is around -28 idle.. but after 5 hours of prime it got to like 1c. Should I try more vcore than 1.71.. or is that pushing it to much? How much Vcore did you use to get 3.7???
mad_skills
10-24-2007, 03:57 PM
i reckon 1.650V....:D
s7e9h3n
10-24-2007, 04:02 PM
For some reason cpuz stops reporting my vcore after a certain amount. I'm using 1.71. Idle my chip is around -28 idle.. but after 5 hours of prime it got to like 1c. Should I try more vcore than 1.71.. or is that pushing it to much? How much Vcore did you use to get 3.7???
Hmmm...that's odd. Maybe try an older version of CPU-Z? :p:
http://img394.imageshack.us/img394/4865/cpu37237yp.jpg
Cow2kie
10-24-2007, 04:16 PM
1.9?? is that safe for 24/7? :O
s7e9h3n
10-24-2007, 04:20 PM
1.9?? is that safe for 24/7? :O
Lol...of course not. Just showing that the cpu was able to take that amount of v-core without exploding. Here's the temp @ 1.904:
http://img223.imageshack.us/img223/3793/3600a1te.jpg
For 24/7 use, I think that you should limit yourself to ~1.65 - 1.70 MAX. ;)
Cow2kie
10-24-2007, 04:22 PM
it looks like you deff have a better cooler than mine. What do you get on 24/7 with it
s7e9h3n
10-24-2007, 04:26 PM
it looks like you deff have a better cooler than mine. What do you get on 24/7 with it
To be totally honest, I used the cpu only once to set the WR and then never used it again. You should be shooting for 24/7 stability @ ~3.2Ghz granted your mobo will be stable @ 320htt.
Cow2kie
10-24-2007, 04:30 PM
Should I mess with the 2 mobo voltage settings any? Dont worry.. I will be trying to get as high as i can max stable.
s7e9h3n
10-24-2007, 04:37 PM
Should I mess with the 2 mobo voltage settings any? Dont worry.. I will be trying to get as high as i can max stable.
Which 2 settings? YOu'll definately have to bump your chipset voltage and use a ldt multi of ~3
Cow2kie
10-27-2007, 02:18 PM
I dont think i'll be reaching 3.2 stable. doh ;[
gianni-gt
10-27-2007, 02:23 PM
what stepping is yours?
mine: :D
http://valid.x86-secret.com/cache/234507.png
http://valid.x86-secret.com/show_oc.php?id=234507
Prime: 3292Mhz @ 1.632V * 3°C (http://bastel-gianni.ch/overclocking/prime_ven3200_0614bpmw_3292.jpg)
1M: 3504MHz @ 1.584V (http://bastel-gianni.ch/overclocking/superpi_24.219_ven3200.jpg)
32M: 3383MHz @ 1.584V (http://bastel-gianni.ch/overclocking/superpi_32m_21min44.563sec_ven3200.jpg)
knopflerbruce
10-27-2007, 04:37 PM
what stepping is yours?
mine: :D
http://valid.x86-secret.com/cache/234507.png
http://valid.x86-secret.com/show_oc.php?id=234507
Prime: 3292Mhz @ 1.632V * 3°C (http://bastel-gianni.ch/overclocking/prime_ven3200_0614bpmw_3292.jpg)
1M: 3504MHz @ 1.584V (http://bastel-gianni.ch/overclocking/superpi_24.219_ven3200.jpg)
32M: 3383MHz @ 1.584V (http://bastel-gianni.ch/overclocking/superpi_32m_21min44.563sec_ven3200.jpg)
I hope I can join the 3200+ Venice 3,7Ghz club one day:D CABHE 0601GPMW on the way, shouldn't bee too bad at least.
s7e9h3n
10-27-2007, 05:48 PM
I dont think i'll be reaching 3.2 stable. doh ;[
Why? What's the problem?
what stepping is yours?
mine: :D
http://valid.x86-secret.com/cache/234507.png
http://valid.x86-secret.com/show_oc.php?id=234507
Prime: 3292Mhz @ 1.632V * 3°C (http://bastel-gianni.ch/overclocking/prime_ven3200_0614bpmw_3292.jpg)
1M: 3504MHz @ 1.584V (http://bastel-gianni.ch/overclocking/superpi_24.219_ven3200.jpg)
32M: 3383MHz @ 1.584V (http://bastel-gianni.ch/overclocking/superpi_32m_21min44.563sec_ven3200.jpg)
Not bad :up: Only took 2 years to break my WR :p:
gianni-gt
10-28-2007, 03:35 AM
hehe yes... in 2009 someone crack mine.. :D