My Finalized Watercooling setup, good?

[revogamer]

Okay so im going to get a new watercooling setup and for my 2900XT and my cpu and im going to get a D-Tek fuzion for the cpu and the MCW60 and the G80 mounting which has shown to work on the swiftech website on the 2900XT and i was going to ask do i need to get the ramsinks for it, or just use the stock one and keep the sock fan on there and buy 2 MCR320's instead of cooling ram, worth it? or would using 2 MCR320s be to much restriction ill be using this setup.. if i got 2 MCR320's would it be good doing Res --> pump --> 1 MCR320 --> CPU --> 2nd MCR320 --> GPU --> back to res?

Swiftech MCRES-MICRO
D-TEK FuZion Universal CPU Waterblock or Apogee GTX?
Swiftech MCW60-R GPU Waterblock w/ or without G80 mounting kit
Laing DDC-3.2 Pump w/Petra'sTech DDCT-01s Delrin Top
Swiftech MCR320-QP
3x Yate Loon D12SH-12
10' 7/16" ID (5/8" OD) Masterkleer Tubing
12 Stainless Steel Worm-Drive Hose Clamps
1/2" OD Polypropylene T-Fitting
Swiftech MCB-120 RadBox
Pentosin G11 (UV blue) Coolant Additive
and Ramsinks??? or another Swiftech MCR320-QP?

[ColonelCain]

I would either get ramsinks for it, of just use the original heatsinks to save money.
2 MCR-320's might be a little overkill, but if you have the room, (and the $$$), then go ahead.

As far as restrictiveness, you should be fine, but don't quote me on that.

EDIT: Dtek, and maybe another MCR-220. And some PT_Nuke.

Good luck!

[revogamer]

Would there be any differences in temps with 2 MCR320s or a MCR320 and MCR220?

[revogamer]

ill be purchasing these from petras, and im in new zealand so i dont know where i would get the EnzoTech ramsinks..

[revogamer]

so i should get oh and how many packs of those heatsinks? 2 sets? thanks.

Swiftech MCRES-MICRO
D-TEK FuZion Universal CPU Waterblock
Swiftech MCW60-R GPU Waterblock
Laing DDC-3.2 Pump w/Petra'sTech DDCT-01s Delrin Top
Swiftech MCR320-QP
Swiftech MCR220-QP
5x Yate Loon D12SM-12
10' 7/16" ID (5/8" OD) Masterkleer Tubing
12 Stainless Steel Worm-Drive Hose Clamps
1/2" OD Polypropylene T-Fitting
Swiftech MCB-120 RadBox
Pentosin G11 (UV blue) Coolant Additive
2 x EnzoTech BMR-C1 Pure Forged Copper Ramsinks
1x Bottle of PT_Nuke
and do i need some MC21 sinks? addition to the enzotech's
look good?

[revogamer]

mm i might go for 2 rads since i got a email back from swiftech saying the MCW30 fits the NB and SB for the Abit IP35-E :) ill purchase to, mgith as well.. i dont want to go over budget which has increased by more than 200 dollars since i started looking into watercooling <.< i started with just CPU and now im doing CPU,GPU SB and NB, this is crazy..

[revogamer]

Ok ive decided to get 2 MCW30's for the SB and NB, i thought might as well get a complete setup and be future proof and the amazing thing is for all of this:


MCR320-QP
5x Yate Loon D12SM-12(medium)
1 x Swiftech MCRES-MICRO
2 packs of EnzoTech BMR-C1 Pure Forged Copper Ramsinks (Pack of 8)
1 x Swiftech MCR220-QP
1 x bottle of Petra'sTech "PT_Nuke" Concentrated Biocide (10mL)
1 x pack of Swiftech MC21 Mosfet Heatsinks (Pack of 4)
2 x Swiftech MCW30 Chipset Waterblocks
1 x D-TEK FuZion Universal CPU Waterblock
1 x Swiftech MCW60-R GPU Waterblock
1 x Laing DDC-3.2 Pump w/Petra'sTech DDCT-01s Delrin Top
1 x 10' 7/16" ID (5/8" OD) Masterkleer Tubing
1 x 1/2" OD Polypropylene T-Fitting
12 x Stainless Steel Worm-Drive Hose Clamps
1 x Swiftech MCB-120 RadBox( just in case for mounting)
1 x Pentosin G11 (UV blue) Coolant Additive

Total: $471.79 + shipping, around $60-70 so $541.79 = $711.57 which in New Zealand equates to about the same as a

SwifTech Apex Ultra "Plus" Liquid Cooling Kit, CRAZY!? isnt it.