POST YOUR E6850 with OC PERFORMANCE

[Hazzan]

Guys :) :) :) Post your E6850 with Stepping and Vcore you use..........better with some Benchmark SPI ...ORTHOS ... PRIME...3Dmark 01.03.05.06.....

PROD. CODE: BX80557E6850SL9AU
MM#: 891188
FPO/BACTH #: L719A844

ok I started.....:) :) :)

http://img.techpowerup.org/070729/SPI E6850364.jpg

http://img.techpowerup.org/070729/3dmark01 E6850221.jpg

[sofarfrome]

there is already a thread for the 6850, why start a new one?

[Clint]

VID 1.0375v ??

Hmm...

[Solarfall]

VID 1.0375v ??

Hmm...

core temp bug... the real vcore is 1.53v check the uguru panel ;)

[K.I.T.T.]

core temp bug... the real vcore is 1.53v check the uguru panel ;)

VID != vCore ;)

[Solarfall]

VID != vCore ;)

yes i know.. whats ur point.

[lawrywild]

I think KITT meant VID "DOES NOT" equal vcore.

His point is that the VID is the stock vcore of a cpu and it's a set value, specific to each chip and can't be altered. Vcore is not the same as VID. It's not a coretemp bug that the VID is not the same as the vcore used.

[K.I.T.T.]

I think KITT meant VID "DOES NOT" equal vcore.

His point is that the VID is the stock vcore of a cpu and it's a set value, specific to each chip and can't be altered. Vcore is not the same as VID. It's not a coretemp bug that the VID is not the same as the vcore used.
Thank you :)

Probably should have written 'is different' rather than != ...would have avoided confusion :p:

[Forsaken1]

Let's see some 4+ with orthos ran for awhile.Most of E6850(retail) will go above 4 on air/water,just not stable at all:down: .

[mercyless]

L719B027
Water cooled
1.55v in bios
http://img411.imageshack.us/img411/9858/e68504ghz15volts12hrsstpz2.th.jpg (http://img411.imageshack.us/my.php?image=e68504ghz15volts12hrsstpz2.jpg)

[pvhk]

e6850@4Ghz on air in matx case (antec nsk3400) with an antec su380w for PSU! gigabyte GA-G33M-DS2R bios F2
FSB@444, ratio 9x ,vcore@1.5625v in bios

e6850 retail box
http://img527.imageshack.us/img527/8063/g7copierlq7.jpg (http://imageshack.us)
Thermalright ultra120 w/ NMB MAT 120 (1900rpm)
http://img502.imageshack.us/img502/8511/g7101copierxw9.th.jpg (http://img502.imageshack.us/my.php?image=g7101copierxw9.jpg)
occt passed
http://img411.imageshack.us/img411/9248/occt110nf5.th.jpg (http://img411.imageshack.us/my.php?image=occt110nf5.jpg)

orthos 2hours:
http://img502.imageshack.us/img502/6346/2h02ul4.th.jpg (http://img502.imageshack.us/my.php?image=2h02ul4.jpg)

[road-runner]

Heres mine...

Suicide 4427 (http://valid.x86-secret.com/show_oc.php?id=221178)

http://img440.imageshack.us/img440/8830/dsc00239gh8.jpg
http://img158.imageshack.us/img158/4732/superpidual1mjn8.png
http://img386.imageshack.us/img386/5229/orthosup2.png
http://i135.photobucket.com/albums/q121/road-runnerOCC/4005_OCCT.png

[Clint]

e6850@4Ghz on air in matx case (antec nsk3400) with an antec su380w for PSU! gigabyte GA-G33M-DS2R bios F2
FSB@444, ratio 9x ,vcore@1.5625v in bios

e6850 retail box
http://img527.imageshack.us/img527/8063/g7copierlq7.jpg (http://imageshack.us)
Thermalright ultra120 w/ NMB MAT 120 (1900rpm)
http://img502.imageshack.us/img502/8511/g7101copierxw9.th.jpg (http://img502.imageshack.us/my.php?image=g7101copierxw9.jpg)
occt passed
http://img411.imageshack.us/img411/9248/occt110nf5.th.jpg (http://img411.imageshack.us/my.php?image=occt110nf5.jpg)

orthos 2hours:
http://img502.imageshack.us/img502/6346/2h02ul4.th.jpg (http://img502.imageshack.us/my.php?image=2h02ul4.jpg)


Excellent, I have the same mobo as you...I will drop a quad on it:D

Did need to put heatsinks on any components at that speed?

[pvhk]

did this on the mofset: home made! (but not necessary)!
http://s209.photobucket.com/albums/bb261/pvhk/?action=view&current=G7977_2copier.jpg
HR05 + fan on the northbridge:
http://img410.imageshack.us/img410/5391/g7091copiertl0.th.jpg (http://img410.imageshack.us/my.php?image=g7091copiertl0.jpg)

[michaLcoughliN]

mine should be arriving tomorrow from purolator. :)

will have tests performed prolly tuesday morning around 5am :p

[Clint]

did this on the mofset: home made! (but not necessary)!
http://s209.photobucket.com/albums/bb261/pvhk/?action=view&current=G7977_2copier.jpg
HR05 + fan on the northbridge:
http://img410.imageshack.us/img410/5391/g7091copiertl0.th.jpg (http://img410.imageshack.us/my.php?image=g7091copiertl0.jpg)

So except from the north and south chipsets there is no components that is getting really hot?

That is amazing at 444MHz!:D

I knew the moment I laid my eyes on this board it would last me long, simply can't be beat for small form builds:up:

[pvhk]

So except from the north and south chipsets there is no components that is getting really hot?

That is amazing at 444MHz!:D

I knew the moment I laid my eyes on this board it would last me long, simply can't be beat for small form builds:up:

no! ;)

[Forsaken1]

L719B027
Water cooled
1.55v
http://img411.imageshack.us/img411/9858/e68504ghz15volts12hrsstpz2.th.jpg (http://img411.imageshack.us/my.php?image=e68504ghz15volts12hrsstpz2.jpg)

:clap: :clap: :clap:

[Peepaw]

road-runner what speeds were you running when you did your superpi 1m run?
14.312 is only a wee bit faster than my 6420@3504.:confused:
I hope that wasn't at 4+.

[ineedaname]

If you guys are gonna post your clocks make sure u post some temps too.

So tossed up to either get a e6850 or a q6600....

[adamsleath]

If you guys are gonna post your clocks make sure u post some temps too.

So tossed up to either get a e6850 or a q6600....

even if you get a 4gig e6850 it simply is not worth getting over the 3.6 u already have in terms of performance :shrug: but if u are obsessed with MHZ then it's an easy choice :lol:

[Dynasty]

using asus P5K-Prem.

http://img136.imageshack.us/img136/5713/4195mhz1mpass158vcnt5.gif (http://imageshack.us)

[road-runner]

road-runner what speeds were you running when you did your superpi 1m run?
14.312 is only a wee bit faster than my 6420@3504.:confused:
I hope that wasn't at 4+.

Yes that was at 4203Mhz but running both at the same time.

[luihed]

Got a L722A241... I did some spi but the times were so slow I didnt bother saving em, at 3600mhz it was 28sec slower than my E6600 in spi 32M... I just tested max suicide and max fsb then I packed it up, gonna return it tommorrow morning....

http://ocidb.com/albums/userpics/10062/mini4500.jpg

http://ocidb.com/albums/userpics/10062/normal_550.png

[georgesod]

Ηow can it be that slower? Did you use the same multiplier?

[dinos22]

Got a L722A241... I did some spi but the times were so slow I didnt bother saving em, at 3600mhz it was 28sec slower than my E6600 in spi 32M... I just tested max suicide and max fsb then I packed it up, gonna return it tommorrow morning....

http://ocidb.com/albums/userpics/10062/mini4500.jpg

http://ocidb.com/albums/userpics/10062/normal_550.png

maybe the abit is making it run on 1333 strap man

try an asus motherboard

[SchnitzelDeluxe]

this here is not an 6850 its an 6600, sry, but thi ios the most impressive core2duo i have ever seen:
http://img110.imageshack.us/img110/7104/4155zc5.jpg

aircooled 68°C :eek:

[dinos22]

is that your CPU man

that's just absolutely amazing !!!

does it have high FSB as well??

[michaLcoughliN]

70c =/ eeep..

[overcrash86]

Got a L722A241... I did some spi but the times were so slow I didnt bother saving em, at 3600mhz it was 28sec slower than my E6600 in spi 32M... I just tested max suicide and max fsb then I packed it up, gonna return it tommorrow morning....

http://ocidb.com/albums/userpics/10062/mini4500.jpg

http://ocidb.com/albums/userpics/10062/normal_550.png

what is the cooling for max screen ?

[lazy]

as someone else mentioned, it seems rather easy getting this cpu up to 4GHz and running pi, but there still hasnt been that many thats able to primie stable for serveral hours

[pvhk]

Gigabyte GA-G33M-DS2R in NSK3400 matx case, crucial ballistix 2x512, 7900GS xpertvision.
Bios F2 used
e6850@4ghz on air : thermalright ultra120
FSB@444, ratio 9x, vcore@1.56250v set in bios
occt version 1.1.0 passed
http://img411.imageshack.us/img411/9248/occt110nf5.th.jpg (http://img411.imageshack.us/my.php?image=occt110nf5.jpg)http://img165.imageshack.us/img165/5796/spi4ghzzs4.th.jpg (http://img165.imageshack.us/my.php?image=spi4ghzzs4.jpg)


vdroop:
http://img165.imageshack.us/img165/723/2007072914h14vcoreqq9.png (http://imageshack.us)

cores temperatures:
http://img151.imageshack.us/img151/9231/2007072914h14cpu1ni4.png (http://imageshack.us)
http://img510.imageshack.us/img510/5233/2007072914h14cpu2ux4.png (http://imageshack.us)

orthos 3h:
http://img254.imageshack.us/img254/9969/3h02oe1.jpg (http://imageshack.us)

[michaLcoughliN]

3hrs isnt techincally "stable" IMO. 10hours ide classify okay.

[Supertim0r]

and Large FTTs priority 9 ;)

[luihed]

Ηow can it be that slower? Did you use the same multiplier?

Yup... Ran 514fsb x 7 1:1 ... Everything is the same cos I popped in the E6600 right after to make sure it wasnt something else....


maybe the abit is making it run on 1333 strap man

try an asus motherboard

I think its not just the Abit.... Its the chipset that makes it run at 1333fsb, the Performance level in Memset was even the same in both runs ( PL=6 )


what is the cooling for max screen ?

Just water.... I was hoping these new cores will hit higher fsb but I didnt get a good one:(

[pippo369]

Gigabyte GA-G33M-DS2R in NSK3400 matx case, crucial ballistix 2x512, 7900GS xpertvision.
Bios F2 used
e6850@4ghz on air : thermalright ultra120
FSB@444, ratio 9x, vcore@1.56250v set in bios


What's the batch number?

[pvhk]

What's the batch number?
box retail
http://www.xtremesystems.org/forums/showpost.php?p=2337794&postcount=11

[lazy]

which is the right one for getting the stablity? by orthos stable... small ftts is all thats needed? not blend?

ive seem alot of people posting orthos with small ftts and not blend

[JargonGR]

This is proof of what getting carried away means. Many of us upgraded to this new CPU thinking it would make a difference but it really was not worth it especiall for users like me that already had an E6600 @ 3.6Ghz 450FSB 1066 strap. I am now running 4Ghz @ 1333 strap and really it is just bragging rigths. Ofc Orthos does not run more than 2-3 hours stable but games play fine which is the main use of this PC.

I will probably sell my older CPU or this one since it was ultimately a waste to get it now. Instead I bougth myself new a pair of new KEF IQ9 speakers a a 300Watt RMS 12" KEF SUBWOOFER (piano Black) and a new KEF IQ6 CENTRAL Speaker to ease the dissapointment and stop myself from buying a not needed Q6850 with a new motherboard.

My 2 cents (Euro ones)

[Peepaw]

Yes that was at 4203Mhz but running both at the same time.

Thanks r-r, I feel better now.:)

[road-runner]

road-runner what speeds were you running when you did your superpi 1m run?
14.312 is only a wee bit faster than my 6420@3504.:confused:
I hope that wasn't at 4+.

Heres a single superpi....

http://i135.photobucket.com/albums/q121/road-runnerOCC/SP32-20070730-104712.png

[lazy]

im not sure it theres something im doing wrong... or if its just my motherboard but heres my max
apparently no matter how much more vcore i give after this point, it just wont boot

http://i196.photobucket.com/albums/aa3/Tboy012/max.jpg

[webwilli]

first short test with my new E6850 retail Boxed:

http://pics.mwirths.de/pics/thumb/e6850_l719b016.jpg (http://pics.mwirths.de/pics/e6850_l719b016.jpg)

L719B016

still testing...

[Peepaw]

Well my e6850 arrived just a few minutes ago. I won't be able to install for awhile, but here's the numbers.:)

Prod code=BX80557E6850SLA9U
MM#=891188
FPO/batch=L719B014
Pack date=07/09/07

[pvhk]

Well my e6850 arrived just a few minutes ago. I won't be able to install for awhile, but here's the numbers.:)

Prod code=BX80557E6850SLA9U
MM#=891188
FPO/batch=L719B014
Pack date=07/09/07
look at my batch!
http://www.xtremesystems.org/forums/showpost.php?p=2337794&postcount=11;)

[Grinch]

Well my e6850 arrived just a few minutes ago. I won't be able to install for awhile, but here's the numbers.:)

Prod code=BX80557E6850SLA9U
MM#=891188
FPO/batch=L719B014
Pack date=07/09/07

where did you order from?


look at my batch!
http://www.xtremesystems.org/forums/showpost.php?p=2337794&postcount=11;)

where did you order from?

[nitteo]

This is proof of what getting carried away means. Many of us upgraded to this new CPU thinking it would make a difference but it really was not worth it especiall for users like me that already had an E6600 @ 3.6Ghz 450FSB 1066 strap. I am now running 4Ghz @ 1333 strap and really it is just bragging rigths. Ofc Orthos does not run more than 2-3 hours stable but games play fine which is the main use of this PC.

I will probably sell my older CPU or this one since it was ultimately a waste to get it now. Instead I bougth myself new a pair of new KEF IQ9 speakers a a 300Watt RMS 12" KEF SUBWOOFER (piano Black) and a new KEF IQ6 CENTRAL Speaker to ease the dissapointment and stop myself from buying a not needed Q6850 with a new motherboard.

My 2 cents (Euro ones)

I CONCUR.

I have a gem of an e6600 Batch L629F (arguably the best OCing batch)

My e6850 batch 18a, seems volt hungry. Experimenting with AUTO voltage on a Striker Extreme, had it sucking 1.52 on 3.8ghz. I have to go manual voltage to 1.55v@3.85ghz to get through 3dmark01, 03, 05, 06 benches.

Trying anything over 3.85 would crash my system.

[pvhk]

where did you order from?



where did you order from?
i bought it at my french reseller...

[splmann]

Cicolinos E6850 @ Dryice -67 Grad 5015 MHZ

Motherboard: ASUS P5K Vanilla no Mods
CPU : Intel E6850
RAM : CELLSHOCK PC9200
Cooling : Otterauge Alu Pod

http://www.abload.de/thumb/aufbaux87.jpg (http://www.abload.de/image.php?img=aufbaux87.jpg)

http://www.abload.de/thumb/cpu-z5015mhzrfk.jpg (http://www.abload.de/image.php?img=cpu-z5015mhzrfk.jpg)

http://valid.x86-secret.com/show_oc.php?id=223201



SuperPi no Tweaks !!!

http://www.abload.de/thumb/superpi10.484hbc.jpg (http://www.abload.de/image.php?img=superpi10.484hbc.jpg)


Regards

SPLMANN

[bito]

Could people pls list there cpu VID from the latest version of coretemp along with their overclocks :)

[Peepaw]

where did you order from?



where did you order from?

Allstarshop.com. From me ordering on the net, till it was logged onto the fedex truck, less than two hours.:D

It's my first time dealing with them but I'm impressed.

[road-runner]

This is proof of what getting carried away means. Many of us upgraded to this new CPU thinking it would make a difference but it really was not worth it especiall for users like me that already had an E6600 @ 3.6Ghz 450FSB 1066 strap. I am now running 4Ghz @ 1333 strap and really it is just bragging rigths. Ofc Orthos does not run more than 2-3 hours stable but games play fine which is the main use of this PC.

I will probably sell my older CPU or this one since it was ultimately a waste to get it now. Instead I bougth myself new a pair of new KEF IQ9 speakers a a 300Watt RMS 12" KEF SUBWOOFER (piano Black) and a new KEF IQ6 CENTRAL Speaker to ease the dissapointment and stop myself from buying a not needed Q6850 with a new motherboard.

My 2 cents (Euro ones)

I agree 100%, I have a E6600 L630F that was running 3825 stable folding 24/7 with 1.55 volts..

[nugzo]

My E6850 L722A. Stable at 4000mhz but thats all. Takes pretty high voltage to achieve stability. 1.675 in bios, 1.63 in windows, 1.61 loaded. First screen shot was at 1.65 in bios but failed orthos after a couple of hours. Had to up voltage to 1.675 for 8 hour orthos stability. Temps are under 60c loaded even at 1.675v.
Cooling with water. Since this CPU was so inexpensive, I am going to run at these voltages 24-7, since temps are reasonable.

http://img115.imageshack.us/img115/1046/4000ti3.jpg

http://img509.imageshack.us/img509/9641/orthoslp0.jpg

[nugzo]

I picked up a L723A today. So far it's much better than my L722A. Priming now at 4103mhz with 1.625v. My L722A above took 1.675 for 4000mhz. Tested the L723A at 4000 with 1.6v for an hour with no issues. Testing in progress, I will post more results when finished.

Edit: 4103 @1.625v failed orthos after an hour. Now back to 4000 @ 1.575 bios. 1.54 windows, 1.50 after droop. Coretemp 25c Idle, 50c loaded. After 3 x6800's. 10-12 E6600's, Looks like my 24/7 4gz goal may come true.

[YoupY]

Don't rembember the batch anymore. I'll check when I replace the Thermalright 120 Exreme for the cascade evap.

at 1.7 V (bios) I got temps around 45 C (coretemp) + 15 = 60 C

http://members.home.nl/jdaandels/spi-1m-11843.jpg

http://members.home.nl/jdaandels/pifast-2198.jpg

[nugzo]

wow 1.7v on air is definitely "Extreme" Way to go!

[NKD]

Batch Number L722A215 on the box. and here is my oc so far.

in the pic it says 25mins but has been running for an hour fine so far.

http://img245.imageshack.us/img245/2596/34e6850orthoshb5.jpg

will push it more as the time goes on.

[bro20000]

Have got a L723a i get 4ghz from 1.5vcore stable!

[nugzo]

Ok it keeps getting better and better with this 723A as far as voltage is concerned. I started at 1.6 just because my L722A took 1.675 for 4ghz stability. I'm now down to 1.525 (1.46v Windows Loaded) for my most recent tests. I've only been running prime for an hour, but i also ran 2 loops of 3dmark 06 while small fft was running. My max temps loaded are 53c with coretemp, 50c everest, and thats with a bunch of air still in the loop. After another hour i'll try 1.5v in bios. I'm excited about so little voltage for 4ghz. Aren't you? lol Here's a SS


http://img369.imageshack.us/img369/596/4000723wb8.png

[NKD]

here is a new oc, so far been running for 30mins,
i will let this go through one loop of prime95, and than try more overclock, dont know how stable it is right now.

http://img329.imageshack.us/img329/8983/3614vyd5.jpg

[bro20000]

Its sound a good chip! With my L723a running a 3ghz i use only 1.125v and 1.275v for 3.6 thats has far has have been today! Memory died last nite it was value ram and it was limiting my overclock went out this morning and bought some Cellshock D9GMH's! It big difference!

[NKD]

so far looking good, will let it run for few hours.

1.35v loaded.

http://img504.imageshack.us/img504/4233/36oc1hourwj9.jpg

[bro20000]

You should easy get it stable with them volts!

[NKD]

3.8 stable so far.

my memory is rated at 800mhz, and it only goes up to 880 on this board, on the evga 680i, it did 980 easily in ulinked mode, but its a different situation on p35. i am going to trade my 4gb a-data with 2gb corsair dominator with this one guy, and hopefully hit 4.0 stable.

http://img98.imageshack.us/img98/6149/38stableoh5.jpg

[overcrash86]

3.8 stable so far.

my memory is rated at 800mhz, and it only goes up to 880 on this board, on the evga 680i, it did 980 easily in ulinked mode, but its a different situation on p35. i am going to trade my 4gb a-data with 2gb corsair dominator with this one guy, and hopefully hit 4.0 stable.

http://img98.imageshack.us/img98/6149/38stableoh5.jpg

cooling ?

[NKD]

i am using water cooling with d-tek fusion waterblock.

its also stated in my sig, i dont believe core temp is reading the G0 stepping right but who knows, because its idles at 18-20c which is like TEC temps, however the IHS is really improved from the old e6400 i had in one of the systems.

[NKD]

Ok it keeps getting better and better with this 723A as far as voltage is concerned. I started at 1.6 just because my L722A took 1.675 for 4ghz stability. I'm now down to 1.525 (1.46v Windows Loaded) for my most recent tests. I've only been running prime for an hour, but i also ran 2 loops of 3dmark 06 while small fft was running. My max temps loaded are 53c with coretemp, 50c everest, and thats with a bunch of air still in the loop. After another hour i'll try 1.5v in bios. I'm excited about so little voltage for 4ghz. Aren't you? lol Here's a SS


http://img369.imageshack.us/img369/596/4000723wb8.png

i have to say that those temps and even mine are not right, i mean i cant idle at 19c, no matter if i am using water and at 3.8ghz, we will have to wait for coretemp to support g0 stepping.

[NKD]

ok here is a screenshot showing the thermal specs of e6850, its 72c, and x6800 is rated at 60c, these are case temps not the core temps, so G0's can handle way more heat than b2's. that makes me sure that we should be adding atleast 10c-15 to our temps.

http://img488.imageshack.us/img488/6124/38oc3hoursxd5.jpg

[Grinch]

so far looking good, will let it run for few hours.

1.35v loaded.

http://img504.imageshack.us/img504/4233/36oc1hourwj9.jpg



I see you are running prime 95 is that with small FFT's or what?

[NKD]

I see you are running prime 95 is that with small FFT's or what?

yes its with small fft's.

i am using prime because orthos only tests one instruction with 8k FFT, and prime really tortures it, it starts at 8k, and as the time goes on, it feeds more data through the l2 cache and stresses it more the orthos, i believe its up to 48k in prime.

i can get it stable with orthos with lower voltages but with prime it takes a little more voltage to get it really stable, i am willing to go up to 1.6v on water and thats it, i might settle at 3.9 as i am testing that right now.

torturing at 3.9 my temps have settled at 53c, and even if i add 15c to that its 68c at 3.9, and intels thermal temps for the G0 e6850 is 72c, and i believe thats the case temp and not even core temp, thats why everyone is able to clock these so high, because it can run at very high temps.

[Grinch]

wow...good chip man...*-)

[NKD]

here is 3.9, 1.54v loaded, core temp 50c i will add 15 to just say its 65c, not sure. still under thermal specs of intel of 72 case temp. if its stable for one loop of prime 95, i will try to max it out at this voltage

http://img233.imageshack.us/img233/3203/39orthosmn4.jpg

[NKD]

this is what i had to set up my vcore as i overlocked

3.6-1.4v in bios
3.8-1.5v in bios
3.9-1.6v in bios, i just set it to 1.6, and if its stable i will try to get more out of it but i certainly cant do 4.0ghz at 1.6.

i believe it has nothing to do with batches, its all on ur chip, someone will get one of the best chips that requires less voltage even at high clocks. those chips are rare, but as i increase clock speed, it will overlock like a mad dog if u put it on steroids and give it the juice it wants, if these temps are indeed real on G0, i will pust it more, i am trying to ad 15c to my current core temps. at 3.9 with rightmark utility it says my core temp is at 50. so i am adding 15c to that and it becomes 65c which makes lot of sense. and that is still under intel's thermal spec of 72c tcase temp, which as far as i know is the max cpu temp, and core temp probably in the 80'ss
__________________

[michaLcoughliN]

http://i169.photobucket.com/albums/u202/michalcoughlin/untitled-9.jpg

3.8ghz @ 1.5vcore =]

[NKD]

here are my oc results so far. vcore under load 1.54v, so far 2+ hours orthos stable and still going. Temps 47c right mark and 50c core temp. arctic silver 5 seems to have burned in.

i believe we should all be adding 15c to our temps, because my mobo reports cpu temps higher than core temp or rightmark utility, but if i add 15c it ends up being 62c, and it makes perfect sense with those temps. which is about 7c higher than what mobo is reporting, this was the case with my previous core 2 duo, the cpu temps was about 5-7c lower than core temp.

i say this because at stock speeds 3.0ghz core temp was reporting temps at 10c per core. that is no way real, even though i could brag about it, its just unreal, because those are the temps with freezone or tec water blocks. my embient is round 17c
http://img98.imageshack.us/img98/9467/392hourstableqh7.jpg

[bro20000]

Have found for ral temps use TAT! And i prefer orthos seems to stress test it more! NKD what ram setting are you using at 3.8!

[scwam]

NKD, I don't personally believe you need to add 15c to the burn temps. I truely believe that the load temps of coretemp are correct. I think it's the idle that are between 9 and 12c low. I've done tests using coretemp on a 939 Lanparty using a very accurate thermistor against the naked die and coretemp was always within 2c of actual loads. What I'm observing on my new system is the same behaviour. However I'm not basing this with the thermistor yet, but only against bios temps vs bios cpu shutdown temps against ambient temps (using another probe for that). To me it's strickly the idle coretemp reporting low. I truely feel your 50c is actual for water, that is consistent with my 939 Opty at the same vcore, with coretemp against bios and verified via ntc micro thermistor. I'm currently running 60-66c at your speed and vcore with the exact same system as you. That's at 28c ambeint (system not in it's case yet). I was only able to get 3.9 stable for 5.5 hours. When I left to go to work my sp2004 failed, It was at the time that my room started becomming hotter during the daytime. I know it was reaching near 70c (coretemp) when I left.

[NKD]

NKD, I don't personally believe you need to add 15c to the burn temps. I truely believe that the load temps of coretemp are correct. I think it's the idle that are between 9 and 12c low. I've done tests using coretemp on a 939 Lanparty using a very accurate thermistor against the naked die and coretemp was always within 2c of actual loads. What I'm observing on my new system is the same behaviour. However I'm not basing this with the thermistor yet, but only against bios temps vs bios cpu shutdown temps against ambient temps (using another probe for that). To me it's strickly the idle coretemp reporting low. I truely feel your 50c is actual for water, that is consistent with my 939 Opty at the same vcore, with coretemp against bios and verified via ntc micro thermistor. I'm currently running 60-66c at your speed and vcore with the exact same system as you. That's at 28c ambeint (system not in it's case yet). I was only able to get 3.9 stable for 5.5 hours. When I left to go to work my sp2004 failed, It was at the time that my room started becomming hotter during the daytime. I know it was reaching near 70c (coretemp) when I left.

yes idle temps were the ones bothering me, but now my temps have dropped to 47c reported by rightmark utility, which is probably rated number one i heard and 50c-53c with core temp, it goes up and down, but rightmark is dead steady at either 47c and 50c. depends on how the cpu is being stressed.

well i was talking about orthos not stressing it more is because, it runs the same instructions over and over, and sometimes it runs the same instructions as prime 95 25.2. it just depends on its mood i guess.

also, i have had a computer run 8 hours orthos stable and fail with prime 95 with in an hour, so i started using this version of prime.

and to ur question about my memory, i am running it at 5-5-5-12. the ram is rated at 4-4-4-12, but i am having issues with this board so decided to loosen the timings a little, i had an evga 680i and the same ram was running up 980 with 4-4-4-12 with 2.2v, but this board the max i can get my ram is 880mhz, with 2.2v and looser timings. i am trading with the one guy, my 4gb for 2gb of corsair dominotors pc2-8500 this week, but right now i am only overclocking with 2gb of ram.

well here is my oc with one complete loop of prime 95, the second loop just started. the picture was taken a few minutes before the loop finished.

http://img441.imageshack.us/img441/2263/391oc4hmm6.jpg

[michaLcoughliN]

Im happy @ 3.8ghz. 1.5vcore is good enough. anything higher on air is not worth it. Waiting for watercooling.

But even then. 4ghz will take 1.55-1.6vcore. which is technically raping your cpu to :banana::banana::banana::banana:. lol I dont believe 1.6vcore on any cpu is smart. doesnt matter how cool you make your chip. Its about the votlage going through it.

[NKD]

well if u really look at it, its only 1.54 going thorough it, i have it set at 1.60 in bios just to be on the safe side, its just everyones preference, i wont go any higher though, i really look at the actual core voltage i dont like it being 1.6. i can live with 1.55 actual. i used to have an athlon fx chip and still have that old system in my dad's office it was oc'ed with 1.6vcore and actual was around 1.55 under load and is still running till this day. been almost 2 years i believe. it was my rig before i got on core2 bus lol

well here is another oc at 3950.

so far the same voltage and i increased the vtt, and i have had an hour stable and still going, i will leave it overnight and hopefully it is good enough.


http://img266.imageshack.us/img266/6028/3951tq2.jpg

[bro20000]

1.6 on water is fine anyway what 1m superpi scores you getting with 3950!

[webwilli]

3.800 MHz
1,344 Volt:

http://pics.mwirths.de/pics/thumb/e6850_l719b016_3800.jpg (http://pics.mwirths.de/pics/e6850_l719b016_3800.jpg)

[bro20000]

What software program are you using there for temps!

[Teccxpert]

Do ES E6850 count?

[bro20000]

Yeah!

[bro20000]

3.76 stable 1.375 hoping for more soon!


http://i19.photobucket.com/albums/b173/bro20000/371.375.jpg

[overcrash86]

L722A215 under 2stage cascade by Skirms

http://valid.x86-secret.com/show_oc.php?id=224350
http://valid.x86-secret.com/cache/224350.png

bench @ 5280Mhz, but freez freez during save :p

http://maxicrash.free.fr/E6850/L722A215/PI%201M%209.672s%205268Mhz.PNG

[bro20000]

That is a amazing overclock! what memory are you using!

[overcrash86]

GEIL 8500 Plus 2x512 ;)

http://maxicrash.free.fr/E6850/L722A215/PI%201M%209.547s%205316Mhz.PNG

[Gautam]

Hahaha now we're talking! 5315 is still on a cascade or is that LN2?

[overcrash86]

Hahaha now we're talking! 5315 is still on a cascade or is that LN2?

i've said 2stage cascade by Skirms :D

-101.7°C :

http://valid.x86-secret.com/show_oc.php?id=224364
http://valid.x86-secret.com/ccpuz.php?id=224364

[Gautam]

:eek:

[NKD]

alright so car 6+ hours stable at 3.95GHz 1.53-54vcore loaded, and still counting, waiting to see the 8+ hour mark complete than i will try to overclock more, coretemps are 47c by right mark utility. will update with some super pi scores as soon as i hit 8 hour stablility mark.

http://img483.imageshack.us/img483/820/46600009na5.jpg

[bro20000]

Your getting there to the magic 4ghz!

[hlonipha]

On AIR :D 4GHZ Here I come:shocked:

http://i65.photobucket.com/albums/h229/malvare1/untitled2.jpg

[NKD]

well finally 3.95 stable. i stopped it after 9 hours

http://img177.imageshack.us/img177/2654/9hourspm3.jpg

[NKD]

well 1mb pi screenshot. as somone asked.

http://img177.imageshack.us/img177/1479/imbpilm9.jpg

[NKD]

On AIR :D 4GHZ Here I come:shocked:

http://i65.photobucket.com/albums/h229/malvare1/untitled2.jpg

can u test with prime 25.3, i bet it will stress ur cpu more. it runs small fft's up to 64k, stresses ur L2 cache more, where orthos just does 8k

[Gamer]

Damn, I ordered a E6850 a week ago, still not availble :(

Great overclocks, can't wait to play with it, the cpu that is :)
Got a modded prom and a Chilly one unit here, these are waiting for some action.
P5K and some OCZ Titanium VX2 that are doing 650mhz without a hickup.

[bro20000]

Where did you order it from!

[NKD]

yea where did u order it from, almost everyone have them, unless u live outside the U.S

[hlonipha]

can u test with prime 25.3, i bet it will stress ur cpu more. it runs small fft's up to 64k, stresses ur L2 cache more, where orthos just does 8k

Actually my first few test runs were using ORTHOS blend and Prime 25.3 and I stopped them both at the 9 hr mark when I got back from work a few days ago. then someone asked me to do an ORTHOS small fft's and I did this run last night. Mine is rock solid stable no matter what stress proggy I run (SO FAR). I will start to increase my FSB to try and tweak for 4.0 GHZ on air over the weekend as my Delta to T is around 15c (that is assuming that intel specs are, 100 tjuntion instead of the reporting 85 on coretemp) I have about 11 more degrees that I might be able to play with before throttling begins. hopefully luck is on my side :up:

[NKD]

well so far running for about 10mins at 4g, will update periodically, i havnt touched the vcore, i have seen on my board, as i up the FSB, more VTT voltage becomes available, 3950 i upped it to 1.41, and at 4G i turned the vtt up to 1.45, and i didnt touch the vcore at all, vtt voltage seems to help alot. vtt voltage on ip-35 pro seems to doing miracle so far. yea ur right no matter what stress program u use, if its stable on etiher one ur computer wont crash. because i dont think anything out there will nearly stress ur computer like either of these.

before i had the vcore at 1.67 and tried to run 4ghz and it would restart within two minutes.

http://img233.imageshack.us/img233/5531/4ghzcs0.jpg

[hlonipha]

well 1mb pi screenshot. as somone asked.

http://img177.imageshack.us/img177/1479/imbpilm9.jpg

I'm running 12sec on 1M Spi. You might want to try and tweak your ram a bit more to lower your Spi score time.

I'm running CMD RATE 1T on my ram. You might want to try that.

Good luck
Hlo..

[NKD]

I'm running 12sec on 1M Spi. You might want to try and tweak your ram a bit more to lower your Spi score time.

I'm running CMD RATE 1T on my ram. You might want to try that.

Good luck
Hlo..


well i am waiting for the corsair dominators, my ram has issues with tighter timings and sometimes i start getting c1 errors, but as long as leave the timings loose it works fine, though this ram worked great with my evga 680i( filled with problems) board. i could run this ram at 4-4-4-12 up to 960 on my evga board, i am getting the dominators cuz they are listed as fully compatible with the boards. my board wont let me run at 1t there is no option available, however the new beta lets u choose what speed u want to run it at, but this bios is perfectly stable for me, and when they release the final version i will update. but my ram is rated only at 2t i havent tried 1t yet but i dont think that will work.

i will try tightning the ram timings after i find the max stable overlock at this vcore. so far 4.0ghz is looking good.

30min stable at 4GHz and counting.

http://img178.imageshack.us/img178/5949/4ghz30minstablejj9.jpg

[neonflx]

i cna't get my memory to run at 1200 i know it can do it cause i used to run i ta t that on my P5N32-E with 2.150 v and never had issues anything over 1000 i can get it stable any suggestions

http://mobiletech.pointclark.net/1.JPG

[NKD]

i tried tighter timings and my computer restarted after 45minutes, and i loosen the timings a bit and its been priming now for about 2 hours. i am running my pc2-6400 in 1:1 ratio, thats why i have to loosen the timings, i am waitings for the dominators which is listed as fully compatible with my mobo, and so i can run it 1:2 and release some pressure on the northbridge and tighten up those timings.

[NKD]

my final speed that i will be running 24/7 is 3950, my memory seems to have issues anything higher than that, once i got it stable at 4ghz for about 4 hours prime stable, once 2 hours but i get random reboots, i think the max my memory can do is what is does at 3950, cant wait till i get my dominators so i can shoot for max fsb

[nugzo]

my final speed that i will be running 24/7 is 3950, my memory seems to have issues anything higher than that, once i got it stable at 4ghz for about 4 hours prime stable, once 2 hours but i get random reboots, i think the max my memory can do is what is does at 3950, cant wait till i get my dominators so i can shoot for max fsb

Thats a great 24/7. I am on water too and i'm 90% sure my 24/7 will be 4000 1.575 bios 1.56 windows 1.53 loaded. 50-55c loaded.

[nugzo]

My next toy .. Just got the good news a few minutes ago. I want a L723A for this too...



http://img484.imageshack.us/img484/3351/6600uz6.jpg

[michaLcoughliN]

http://img178.imageshack.us/img178/5949/4ghz30minstablejj9.jpg


You jsut gave everyone ur serial for windows..h0w do you feel?

[NKD]

its alright didnt pay for it. LOL.

[Gamer]

Where did you order it from!

hardwareversand.de

[mucker]

E6850 will be my next cpu........

[webwilli]

4 GHz Primestable :D

1.464 Volt

http://pics.mwirths.de/pics/thumb/e6850_l719b016_4000.jpg (http://pics.mwirths.de/pics/e6850_l719b016_4000.jpg)

[hausner]

4 GHz Primestable :D

1.464 Volt

http://pics.mwirths.de/pics/thumb/e6850_l719b016_4000.jpg (http://pics.mwirths.de/pics/e6850_l719b016_4000.jpg)

stepping/batch code?

[dinos22]

you really should look at the screenshot again i think ;)

[nugzo]

4 GHz Primestable :D

1.464 Volt

http://pics.mwirths.de/pics/thumb/e6850_l719b016_4000.jpg (http://pics.mwirths.de/pics/e6850_l719b016_4000.jpg)

You definitely have a good chip. I wouldn't consider 2hours prime stable though. I was 2 hours at same voltage but consistently failed after 4hours or so. I'm now 8+ hours at 1.575 bios, 1.56 windows 1.54 loaded. L723A.

[0DIGy]

you should also try Small FFTs test ;)

but still it's definitely a good chip

my L719B174 runs at 3900@1.4V but i have my FSB wall around 500FSB (it's an E6750) so i can't get 4G stable :'(

[Peepaw]

Here's the results of my first morning with mine.
And before you ask, NO it's not Orthos stable.:ROTF:

http://img.photobucket.com/albums/v500/scooterhd69/superpi4140c.jpg

[NKD]

finally got my dominators, trying 2000FSB right now. running prim for 10 mins and on. will update if its stable or not.

http://img482.imageshack.us/img482/1700/2000mhzfsbft5.jpg

[NKD]

half an hour so far at 500fsb

http://img230.imageshack.us/img230/2333/2000mhzfsbvp6.jpg

[NKD]

1 and half hour at 500fsb

http://www.imagehosting.com/out.php/i994464_500fsb2hour.JPG (http://www.imagehosting.com)

[scwam]

Does this have any significance? Not knowlegable about benching, but I know Lost planet is amazing on this system.

http://i75.photobucket.com/albums/i304/scwam/12.093.jpg

[NKD]

i am able to get my ram stable at 1000mhz with 4-4-4-9, it was tested with memtest at those settings. this was done at cpu speed 3979 with the above memory timings and with 497fsb=1988.


http://img218.imageshack.us/img218/7202/spimh5.jpg

[nugzo]

I've found my 24/7 OC for this L723A E6850. EVGA 680i 1.55v Bios, 1.53v Windows, 1.50v Loaded. 50-55c Loaded.

http://img294.imageshack.us/img294/1562/untitleddn7.jpg

[Peepaw]

Little better.:)

http://img.photobucket.com/albums/v500/scooterhd69/superpi4212b.jpg

[NKD]

Little better.:)

http://img.photobucket.com/albums/v500/scooterhd69/superpi4212b.jpg

is this ur 24/7 OC, i highly doubt it unless ur running some extreme cooling or u have voltage to like 1.8v, but any how he was saying thats his 24/7, i know its better.

[NKD]

I've found my 24/7 OC for this L723A E6850. EVGA 680i 1.55v Bios, 1.53v Windows, 1.50v Loaded. 50-55c Loaded.

http://img294.imageshack.us/img294/1562/untitleddn7.jpg

can u post ur settings, i can get 3950 24/7 prime stable, i have the vcore to 1.53 loaded, but i cant break 4GHZ, i can get it stable 2 hours and thats it, i can up the voltage but it doesnt seem to help, i am happy with 3950, cuz there is no differecne that i will ever see between 3950 and 4000, but 4 GHz just looks sweet, lol.

i wish i could run my ram in unlinked mode and at the speed i wanted, but i can with my ip-35 pro, never mind u have a 680i and i have a p35 so only setting i could rely on is vcore.

[nugzo]

can u post ur settings, i can get 3950 24/7 prime stable, i have the vcore to 1.53 loaded, but i cant break 4GHZ, i can get it stable 2 hours and thats it, i can up the voltage but it doesnt seem to help, i am happy with 3950, cuz there is no differecne that i will ever see between 3950 and 4000, but 4 GHz just looks sweet, lol.

i wish i could run my ram in unlinked mode and at the speed i wanted, but i can with my ip-35 pro, never mind u have a 680i and i have a p35 so only setting i could rely on is vcore.

1.55 vcore in bios. If i'm not mistaken, your chip is a L722A right? My L722A stopped where yours did unless i upped voltage to 1.675. Temps were acceptable but too much voltage to be comfortable with. I hope i get a L723A tomorrow on one of my quad G0's. :up:

[NKD]

yes its L722A yeah i am ok with 3950 max with 1.53 loaded, that much voltage doesnt make sense for 50mhz.

[Peepaw]

I wasn't saying mine was a little better than his. I was refering to my post a few back, twas a little better.:)

I've got it real stable at 3800, and so far it's been me that wants to quit, not the chip.
I did the 4212 on 1.625 vcore but that wasn't real stable. Increasing vcore to 1.6375 made it stable enough to do some benching. I believe at 1.65 it would be stable enough to run orthos.:D

[NKD]

thats good, same here i have gotten it max stable at 1.53v loaded, i can boot at 4.2 but i just cant get it stable no matter what voltage i apply. i have quit at 3950, though after that i tried 4ghz but failed after two and half hours, where 3950 ran for 24 hours with prime. i might try 3975, but i am happy with 3950, 4ghz is not worth the time and stress.

[scwam]

NKD: Me and Peepaw are having a little e-competition, that's all.
Under 12 seconds....bring it on cascade! (disclaimer: I don't claim any stability at this speed)
http://i75.photobucket.com/albums/i304/scwam/ultimate.jpg

[NKD]

NKD: Me and Peepaw are having a little e-competition, that's all.
Under 12 seconds....bring it on cascade! (disclaimer: I don't claim any stability at this speed)
http://i75.photobucket.com/albums/i304/scwam/ultimate.jpg

good to know, i will be spectating

[Lu(ky]

All the guys over 4.0GHz and higher are you 3DMARK06 stable?

[nugzo]

All the guys over 4.0GHz and higher are you 3DMARK06 stable?

yes. i just ran 6 loops per test. scored 13,450.

[scwam]

I think my 6850 is stable between 4 to 4.1. But I've not tested it or had it long enough to run it through loops. I know I'm 3850 stable on dual burn (air) so far.

[NKD]

i have mine 3970 stable on water, at 1.53 loaded, 4ghz just wont do even with voltage increase, i am sure i could get it stable at 1.65 or so, but not worth the temps for 25-30 more mhz.

my 3dmark06 is 13778, i have the same ultra like urs, the msi one, but i flashed it with xfx ultra bios the xxx edition, it has never crashed or anything for the last 3 weeks, 24/7 loop of 3dmark06 and hours and hours of gaming, its even worked flawless at 685 but anything above i start getting artifacts, may be with a better cooler i could get more.

[scwam]

That's strange. My system responds to voltages pretty well. Seems to do stock up to 3650, about 1.4 up to 3750, 1.45 up to 3825 or so. and 1.505 at 3880. It's past the 3880 that I get limited 10 to 50 minutes burn runs at any higher voltage. Seems to responds up to 1.6 but temps error it out after 65c or so. I have yet to get past 12,900 with my gtx even at 4050 mhz. I did run 3dmark 06 a couple times at that but at 4072 or so I got a crash. Need to get it on water.

[NKD]

alright here is my 3dmark05 and 06 score, cpu speed 3970 24/7 setup. with single ultra 675/2300, and some games at 1920x1200x32 all with 4xaa and 16x af. everything maxed out.

3dmark 05

http://img485.imageshack.us/img485/48/3dmark05vu6.jpg

3dmark06, note this was the only test done at 702core and 2300 memory.
http://img485.imageshack.us/img485/682/3dmark06rr5.jpg

http://img454.imageshack.us/img454/9472/fearbo0.jpg

http://img300.imageshack.us/img300/262/companyofhereos1gv0.jpg

world in conflict.
http://img184.imageshack.us/img184/9642/worldinconflictsm9.jpg

quake wars 53avg, taken with fraps.

[webwilli]

3DMark2005

756/1150 MHz 8800 Ultra
4.260 MHz E6850
9*473 MHz

http://service.futuremark.com/compare?3dm05=3312649

3DMark2001

756/1150 MHz 8800 Ultra
4.260 MHz E6850
9*473 MHz

http://service.futuremark.com/compare?2k1=9237948

[Peepaw]

3d01@3780

http://img.photobucket.com/albums/v500/scooterhd69/3d013780.jpg

[giorgos th.]

just bought one my self today..i havent done some serious testing (orthos etc etc) but is runs 100% some loops of 06 with the cpu tests,some 1024 primes,16M pi etc etc at 3750mhz @ 1.39Vcore loaded (1.4125V in bios - damper enabled).
L720A the batch..

[Garrett]

I've ordered one today, can't wait... these things clock like crazy... is there anyone that has NOT been able to go over 3.7/3.8/3.9ghz on air? :slobber:

[Severance]

My stable overclock...L722A496 1.6 vcore
-asus 2900xt crossfire
This chip performs on par with my x6800 cpu lol $300 vs $1000 Im gonna cry

[irangan]

12hours Prime, 4ghz, 1.48vcore(bios) 1.46vcore(windows due to mobo voltage damper), Asus P5K Deluxe, 0501 Bios on WC

http://img266.imageshack.us/img266/9282/4ghz146vcoreprime12hourts7.jpg (http://imageshack.us)

Passed 32mb, 3.6ghz, 1.26(bios) 1.24vcore(windows due to mobo voltage damper), Asus P5K Deluxe, 0501 Bios on WC

http://img230.imageshack.us/img230/4016/32mb36124vcoreav0.jpg (http://imageshack.us)

[giorgos th.]

what is your batch irangan?

[maolito]

Hi,how much V-core is the max recommended for 24/7? i get this with 1.5125 in Bios.
My 6850 step is:

Sla9u Malay
L719A 773

Is it good?
http://img524.imageshack.us/img524/228/420x94441211wz3.th.jpg (http://img524.imageshack.us/my.php?image=420x94441211wz3.jpg)



bye

[rsnt]

Here's my contribution to this thread. I received my E6850 last week, I just started OCing today (this is my first manual OC ever so don't laugh at it :P)

http://i3.photobucket.com/albums/y63/fr000st/3600ghz_load.jpg

I had to up the voltages in baby steps because it's my first time. I seems stable enough now seeing how I crashed and froze for about an hour before I got that far with orthos. It basically kept freezing after 5mins or so.

Edit 1:

3.8ghz

http://i3.photobucket.com/albums/y63/fr000st/3800ghz_loaded36mins.jpg

[giorgos th.]

well after some testing i got this quick 32m.
Vcore at 1.53V..

http://img249.imageshack.us/img249/7259/32mjf3.jpg (http://imageshack.us)

[rsnt]

last one for now:

http://i3.photobucket.com/albums/y63/fr000st/3800ghz_1100ocz_loaded40mins.jpg

This is my first overclock and I have to say I'm impressed :D

if anyone has any comments let me know... maybe I can do better.

[scwam]

All ambient temps between 27 to 29.5c (not in the case yet)
Stable:
http://i75.photobucket.com/albums/i304/scwam/12hours3906stability.jpg

I think it's going to me highest on air. Post bios Vdroop on speedfan. I've had it for a few hours longer than this:
http://i75.photobucket.com/albums/i304/scwam/3924.jpg

3dmark06 no problem 4x:
http://i75.photobucket.com/albums/i304/scwam/06stability4x.jpg

[Solarfall]

awesome scores guys cant wait to try clocking my e6850 later on today ( its L719B027) :D

[irangan]

what is your batch irangan?

I cant remember clearly what is my batch code. Should be L720A***

[scwam]

awesome scores guys cant wait to try clocking my e6850 later on today ( its L719B027) :D

Oh, you got the good one man! Mine is also L719B014

[mercyless]

last one for now:

http://i3.photobucket.com/albums/y63/fr000st/3800ghz_1100ocz_loaded40mins.jpg

This is my first overclock and I have to say I'm impressed :D

if anyone has any comments let me know... maybe I can do better.

i would lower your vdimm , 3.1v is well high for the mhz its doing,

also HT(SPP-MCP) volts could go down abit to around 1.5-1.6v.

[Solarfall]

Oh, you got the good one man! Mine is also L719B014

awesome im currently testing it at 4.2ghz.. seems like a good one.. cant wait to get this thing under DI :D

[bro20000]

That sound nice! Currently got mine a 4ghz cooling was letting me down! Doing a new test 2day got new cooling last nite!

[giorgos th.]

a bit better.with 1.55Vcore on load.

http://img.techpowerup.org/070807/32m362.jpg

[adambomb13]

I'm looking for overclocking suggestions specifically for the following hardware:
(FSB, voltage settings, ram settings)

CPU: Core 2 Duo E6850
RAM: 2GB Corsair Dominator 10000
Motherboard: Asus Striker Extreme (bios 1301)
Video card: Evga 8800 GTX Super overclocked version
Hard drives: 3 (750GB Western Digital 7500AAKS in RAID 5)
Power Supply: 750W PC Power & Cooling Quad
VapoChill LS

Thank you for any input

[Garrett]

I got a L720A696 with Product Code: BX80557E6850SLA9U... tomorrow evening I'll be putting this chip to the test... I know of at least 1 L720A that primes @ 1.39v @ 4ghz... if this one can do that too... :slobber:

[giorgos th.]

Can i enter the under 12" competition?

[Gamer]

Got one yesterday, cooling is R404a.
A bit disapointing :(

L722A560

[OnDborder]

Almost 4.6, and that's dissappointing??? Lol.. If I could be so lucky.
What vcore/temps are you running?

[hlonipha]

the Spi score is dissapointing as mine is 12 sec @3919 :D

[Gamer]

could be, only where did you post your score ?
I can always learn :)

[michaLcoughliN]

Gamer wats ur vcore and what type of cooling are you running? and stable? temps.. dont post a SS without all the goodies ;)

[Gamer]

sorry :)
Asus P5K bios 603
Vcore pencilmod 1.688v in bios
2048MB-Kit OCZ DDR2 PC2-8000 Titanium Alpha VX2
Modded prometeia with R404A
3Dmark stable at 4500mhz, taking first spot on 3D01 with single 7300GT, cooled with Chillyone unit, check my HWboints :)
Wprime 1024 stable at 4500mhz.
Not using this machine for anything else than benchmarking, rest is useless to me, sorry.

[hlonipha]

could be, only where did you post your score ?
I can always learn :)

This is a 2t command rate @4.1ghz from about 2 weeks ago when I first got the cpu, once home later today I will post similar scores at 3.9ghz 1t cmd rate. with much less voltage.

http://i65.photobucket.com/albums/h229/malvare1/untitled3.jpg

[Gamer]

lol.
Please take mod 1.5 XS to bench, it can even be 12.999 seconds in your screen :)

[hlonipha]

lol.
Please take mod 1.5 XS to bench, it can even be 12.999 seconds in your screen :)

ok thanks will try that once home from work :D

[hlonipha]

Ok here it is at 3.97ghz. Gamer: You were correct about scores but I'm still in the 12sec under 4ghz :D


http://i65.photobucket.com/albums/h229/malvare1/superpi3979.jpg

[andyddr]

last one for now:

http://i3.photobucket.com/albums/y63/fr000st/3800ghz_1100ocz_loaded40mins.jpg

This is my first overclock and I have to say I'm impressed :D

if anyone has any comments let me know... maybe I can do better.

I'm getting pretty much the same results as you are (3.8G with bios 1.35v). There was a mistake on my order and I'm forced to run a stock Intel cooler until the Vindicator arrives. Impressed with my E6850 (L723A047). Post some screenies here tomorrow.

[jugeen]

myne is L723A943. i have just checked Pi32M 3,6GHz@1,4V. stable. :)

[adambomb13]

I currently have my system stable at 4.06Ghz
FSB unlinked
1.45 vCore
1800 FSB
Memory FSB 1250Mhz
Mem v 2.4
North Bridge 1.40

Ambient idle temp -33c

Still looking for better Results especially when I have 900+ for a cooler!!!

ANY SUGGESTIONS????


CPU: Core 2 Duo E6850 batch #L723A943
RAM: 2GB Corsair Dominator 10000
Motherboard: Asus Striker Extreme (bios 1303)
Video card: Evga 8800 GTX Super overclocked version
Hard drives: 3 (750GB Western Digital 7500AAKS in RAID 5)
Power Supply: 750W PC Power & Cooling Quad
VapoChill LS

[jugeen]

I currently have my system stable at 4.06Ghz
FSB unlinked
1.45 vCore
1800 FSB
Memory FSB 1250Mhz
Mem v 2.4
North Bridge 1.40

Ambient idle temp -33c

Still looking for better Results especially when I have 900+ for a cooler!!!

ANY SUGGESTIONS????


CPU: Core 2 Duo E6850 batch #L723A943
RAM: 2GB Corsair Dominator 10000
Motherboard: Asus Striker Extreme (bios 1303)
Video card: Evga 8800 GTX Super overclocked version
Hard drives: 3 (750GB Western Digital 7500AAKS in RAID 5)
Power Supply: 750W PC Power & Cooling Quad
VapoChill LS

we have the same CPU batch# :)

[adambomb13]

Jugeen

I'm a newbie when it comes to OC'ing, would you happen to know or have suggestions for me to get my E6850 OC'd to 4.5Ghz or more?

Thanks anyone for any additional suggestions

[jugeen]

Jugeen

I'm a newbie when it comes to OC'ing, would you happen to know or have suggestions for me to get my E6850 OC'd to 4.5Ghz or more?

Thanks anyone for any additional suggestions

i don't know striker extreme. i haven't seen its BIOS. sry! :(

[michaLcoughliN]

I currently have my system stable at 4.06Ghz
FSB unlinked
1.45 vCore
1800 FSB
Memory FSB 1250Mhz
Mem v 2.4
North Bridge 1.40

Ambient idle temp -33c

Still looking for better Results especially when I have 900+ for a cooler!!!

ANY SUGGESTIONS????


CPU: Core 2 Duo E6850 batch #L723A943
RAM: 2GB Corsair Dominator 10000
Motherboard: Asus Striker Extreme (bios 1303)
Video card: Evga 8800 GTX Super overclocked version
Hard drives: 3 (750GB Western Digital 7500AAKS in RAID 5)
Power Supply: 750W PC Power & Cooling Quad
VapoChill LS


Raise Vcore to 1.55 and raise ur FSB to 500 :)

And I want a phase unit :( (will accept free donations ;))

[adambomb13]

Well so far it looks like air cooling or water is in my situation as good or better then my phase cooling, but thank you for the suggestions.

Please keep the suggestions/advice coming

Thanks

[giorgos th.]

we mortals with air/water give 1.45Vcore...
you with the LS should definately give some more juice...

[zsamz_]

we mortals with air/water give 1.45Vcore...
you with the LS should definately give some more juice...

lol i give 1.55 on air

[adambomb13]

Well you mortals know more then I, because Im unable to unlease the POWER of phase cooling. And trust me my wife doesnt know how much it cost yet so Im safe for now..i think LOL

So your saying im Ok to go to say upto 1.6v on vCore???

at 4.06Ghz my cpu temp idle is -32c

Please keep the advice coming... And actually if anyone wants to call me and baby me through my under overclocking process, please send me a private message.,...

[giorgos th.]

by saying "we mortals" i don`t mean that you are a baby,but that you are in a better position than us by having an LS..
try with 1.5 - 1.55Vcore to see how it`s going..
Cheers..
BTW here is a max freq. shot with 1.65.

[adambomb13]

Im not taking anything personal, I'm calling myself a baby/newbie to the overclocking world....I spent way too much money for my components to only get to 4.06Ghz i think... when I see other posts for 4.5Ghz to 5.3Ghz for an E6850 on water/air.. I just feel frustrated and looking for any help I can get to have my system run at its full potential.

So keep the suggestions/advice and even jokes/humor coming I seriously need it...

Thanks again

[jugeen]

Raise Vcore to 1.55 and raise ur FSB to 500 :)

And I want a phase unit :( (will accept free donations ;))

if you get more than one donation, you would drop me an e-mail :D

[hlonipha]

Im not taking anything personal, I'm calling myself a baby/newbie to the overclocking world....I spent way too much money for my components to only get to 4.06Ghz i think... when I see other posts for 4.5Ghz to 5.3Ghz for an E6850 on water/air.. I just feel frustrated and looking for any help I can get to have my system run at its full potential.

So keep the suggestions/advice and even jokes/humor coming I seriously need it...

Thanks again

I would leave memory settings @ optimal for now and just raise vcore to 1.60 and your ldt a bit more and start upping the fsb to at least 4.5 in 100 mhz increments. reboot to windows and another 100 mhz to see how far can you take your cpu. Even if you have to use a divider with your memory to take it out of the equation. I'm not sure how much volts will your board allow you to use but with the LS, man, you should be in good shape.

good luck hope that someone else with the asus board help out a bit.

p.s I've been able to boot and prime 1hr,super pi @ 4.2 ghz on air. but CPU gets way too hot (need your LS) :)

[rsnt]

i would lower your vdimm , 3.1v is well high for the mhz its doing,

also HT(SPP-MCP) volts could go down abit to around 1.5-1.6v.

lol you really think I'd be able to boot with that high vdimm? :D if not blast my memory out of the board :p For some reason, many/most of the monitoring software around report weird temps and mainly voltages. and I think SPP-MCP was removed a few BIOS updates ago on my board.

[rsnt]

I'm getting pretty much the same results as you are (3.8G with bios 1.35v). There was a mistake on my order and I'm forced to run a stock Intel cooler until the Vindicator arrives. Impressed with my E6850 (L723A047). Post some screenies here tomorrow.

I couldn't get mine 3.6 stable at that voltage :shakes: it took 1.45v to get it stable. I have the L719B095 and I wish I could've got my hands on a 20A - 23A but oh well...

[mercyless]

lol you really think I'd be able to boot with that high vdimm? :D if not blast my memory out of the board :p For some reason, many/most of the monitoring software around report weird temps and mainly voltages. and I think SPP-MCP was removed a few BIOS updates ago on my board.

you'd be suprised, 3 plus volts is do-able to boot, cause you said its your first go at overclocking, thought i'll mention it, my bad :)

[hlonipha]

I couldn't get mine 3.6 stable at that voltage :shakes: it took 1.45v to get it stable. I have the L719B095 and I wish I could've got my hands on a 20A - 23A but oh well...

I got the L718A190 batch and is not so bad thus far :D

[Severance]

Im not taking anything personal, I'm calling myself a baby/newbie to the overclocking world....I spent way too much money for my components to only get to 4.06Ghz i think... when I see other posts for 4.5Ghz to 5.3Ghz for an E6850 on water/air.. I just feel frustrated and looking for any help I can get to have my system run at its full potential.

So keep the suggestions/advice and even jokes/humor coming I seriously need it...

Thanks again
please give link to 4.5 or 5.3 on water or air LOL. My 6850 needs 6+ volts to be stable at 4 gig so i dont think 5.3 is possible and 4.5 has no chance to be stable with regular water. Im using chilled water at 10c and my cooling system is barely holding good temps. Dont believe everything you read brother.

[rsnt]

you'd be suprised, 3 plus volts is do-able to boot, cause you said its your first go at overclocking, thought i'll mention it, my bad :)

Really? wait right... for some reason I totally forgot that most high end memory default around 2.3 or so. My bad then lol

[rsnt]

I got the L718A190 batch and is not so bad thus far :D

I dunno but it seems that anything with A's in them overclock a bit better. I even remember seeing a 19A that overclocked pretty good.

[mercyless]

Really? wait right... for some reason I totally forgot that most high end memory default around 2.3 or so. My bad then lol

you asked for comments, i mentioned it, nothing more.

[adambomb13]

Latest update: Unable to keep 4.06Ghz stable :(

I have tried dropping the RAM out of the picture and un-linking the FSB. I cant even get 4.06Ghz stable anymore
I have tried:
FSB unlinking
Tried CPU FSB 18000
Tried MEM FSB 800
Tried vCore from 1.35 to 1.65v
Tried Mem v (Corsair tech suggested 2.4v) 2.4 to 2.425v
Tried Mem settings 5,5,5,18 Trcd 24
Tried Mem at 800 FSB and all mem settings at Auto
Tried HT 1.2 1.25v
Tried NB 1.40 to 1.55v
Tried SB 1.55
Tried Vtt 1.25
Tried disabled SLI Memory
Tried disabled all the spread spectrum settings
LDT Frequency I dont know what that is but I have the options 1-8x (5x default)

I think Im missing something. Do you think I should kill my RAID 5 and re-format so that I can use the SATA controller (stability)???

I'm at the point of returning my $900.00 Vapochill LS and accepting stock settings.

Thanks for all the help so far, please keep it coming

[Garrett]

Well I've been playing around with my e6850, it's a L720A696 SLA9U stepping :)
4ghz rock stable @ 1.52 vcore :) <---- that's my 24/7 speed.

Unfortunately my GA-P35-DS3 undervolts, I've selected 1.6v in bios which gives 1.54 under normal circumstances :down: and 0.03v vdroop with both cores loaded results in 1.51v :down:

[michaLcoughliN]

Im still on air. so old sk00l :p ahh its good enough for me. that extra 200mhz wont really improve much. the only thing i can see it doing is making it hotter in my room :o hehehe

[Infa]

Ive got mine to 4.1 stable 1.65v. around 58c in Load...

Max is more then 4.320Ghz, Vcore 1.78.
Im pretty satisfied until wolfdale :)

SLA9U , L722A186 REV G0

http://valid.x86-secret.com/show_oc.php?id=228419

[stephen23]

Just a quick test on 3.2G, 3.6G and 4G on prime95

My rig:
CPU:E6850 L722A232
M/B:Asus P5K-Deluxe
CPU Cooler:Ultra 120 eXtreme with thermaltake A1926 fan
RAM:Crucial Ballistix DDR2-1066 5-5-5-15 1G X2
VGA:Asus 2600XT DDR3
POWER:Enermax Liberty 500W
CASE:Thermaltake Armor Jr.


3.2G Start
http://i95.photobucket.com/albums/l133/hkvinsanity/3.2G_primeLarge.jpg

3.2G finished
http://i95.photobucket.com/albums/l133/hkvinsanity/3.2G_prime30mins_finishLarge.jpg

3.6G start
http://i95.photobucket.com/albums/l133/hkvinsanity/3.6G_primeLarge.jpg

3.6G finished
http://i95.photobucket.com/albums/l133/hkvinsanity/after3.6GprimeLarge.jpg

4G start
http://i95.photobucket.com/albums/l133/hkvinsanity/4G_primeLarge.jpg

4G finished
http://i95.photobucket.com/albums/l133/hkvinsanity/4G_prime_1hrfinished.jpg

[bro20000]

You need to torture test them alot longer than a hour say 5 to 24 hours!

[Garrett]

That's true bro20000, but an hour of stress is already a very good indication ;)
And Stephen23, you should add 15c to those temps right?

Mine says 21 idle lol... the air coming out of the PA120.3 is 26c... :rofl:

Currently Orthos running @ 3.6ghz @ 1.328v load voltage (1.360 idle, 1.40 set in bios, stupid GA-P35-DS3 vdropping vdrooping board :down: )

[jugeen]

I downgraded back to two cores. Orthos runing 9*430 @ CPU 1,4625V @ PLL 1.6V @ NB 1.4V @ FSB 1.5V and after one hour my PC is randomly restarting. what the problem can be? any idea? thx!

[stephen23]

You need to torture test them alot longer than a hour say 5 to 24 hours!

thx for your advice!!!
I might do it later.

[stephen23]

That's true bro20000, but an hour of stress is already a very good indication ;)
And Stephen23, you should add 15c to those temps right?

Mine says 21 idle lol... the air coming out of the PA120.3 is 26c... :rofl:

Currently Orthos running @ 3.6ghz @ 1.328v load voltage (1.360 idle, 1.40 set in bios, stupid GA-P35-DS3 vdropping vdrooping board :down: )

at least 15 degrees......................even on Intel TAT.

[Infa]

i think its the idle temps thats have to be addes 15c not the load temp for some reason.... would really be nice of an update of coretemp :)

[Teccxpert]

I see lots of users with E6850 benching around 4Ghz on XP, how does the overclocking sit on Vista?

[jugeen]

i think its the idle temps thats have to be addes 15c not the load temp for some reason.... would really be nice of an update of coretemp :)

what are your voltages for 4.2GHz?

[Severance]

On my p5k deluxe i think Ai suite is correct temp you can see tat is way off. My cpu needed 1.58v to be stable here a week ago and now needs 1.6v in only a week so im sure that these high volts we are pumping into these things will kill them fast. these are idle temps. full load suite reads 53c and tat 40c. Im using water chilled to 12c.

[bro20000]

Had say ai suite right! Try rightmark cpu clock utility that gives right temps out!

[Locust]

Finaly got some time to test this baby. Been sitting in the box for 2 weeks ;)
E6850 L22A*
P5K3 Dlx

Auto Vcore. Shows at 1.464v - Also tested @ 4.06 9x450 1.55v but not using Orthos or Prime, so not going to post that till proven stable.

http://www.freak3d.com/clock/FSB470-1880CLK76615-1T-225vstrap266boost0vcoreAuto.jpg

[giorgos th.]

you can try running 2 instances of pi 32m at 4.06 - 1.55V if you dot want to use orthos for the moment..

[Locust]

you can try running 2 instances of pi 32m at 4.06 - 1.55V if you dot want to use orthos for the moment..

I was mostly testing memory performance for now and only ran some Dual instance of Prime overnight at the above posted settings.
I will do more testing over the weekend.

[stephen23]

Finaly got some time to test this baby. Been sitting in the box for 2 weeks ;)
E6850 L22A*
P5K3 Dlx

Auto Vcore. Shows at 1.464v - Also tested @ 4.06 9x450 1.55v but not using Orthos or Prime, so not going to post that till proven stable.

http://www.freak3d.com/clock/FSB470-1880CLK76615-1T-225vstrap266boost0vcoreAuto.jpg

1.55V can run 2 32M Super pi simutaneously for my 6850, but not on orthos and prime95

[Infa]

I see lots of users with E6850 benching around 4Ghz on XP, how does the overclocking sit on Vista?


Its working perfect in Vista for me atleast, never had any problem with it, the only bad thing i can think of is Super Pi is getting some slower results. Otherwise its working flawlessly, got it to 4.320Ghz.


what are your voltages for 4.2GHz?

For my 4.2 i have to use 1.70 aprox, its not stable anyway so i can use 1.65-1.67 for it to, it crashes when i play games or so. just have to get it cooler, but i cant couse of the weather, 27c amb. here and really moisty.

[michaLcoughliN]

That's true bro20000, but an hour of stress is already a very good indication ;)


not true at all unfortunately. When I was overclocking my E6850, It failed a few times around the 2 hour mark. then at 2 hour 30 min.

Then i bumped Vcore upto 1.525 and passed for 10+ hours through orthos.

So in conclusion your theory is wrong about "after an hour is a very good indication"

[adambomb13]

Update: I finally got stable at 4.06Ghz with everything at AUTO (default) except

vCore 1.4 and North Bridge at 1.20v

So thank you for all your help. But I really really think I have more to go because my CPU is in the negatives celcuis (sp.)

So if anyone is experienced with the Asus Striker Extreme and E6850, please pretty please i need your feedback.

I just cant belive I hit the ceiling on this setup.

Adam

[Infa]

Ok, now i've pushed my cpu to its Maximum atleast with Summer temps around and so on, so i will compile some info, think that it will be more informative. :)

Processor: E6850
Stepping: SLA9U , L722A186 REV G0
Orginal MHz: 3.0ghz
OC MHz: 4.369Ghz (4.1 stable)
FSB: 485 (457)
Mutipel: 9
Orginal Vcore: 1.35v
CPU Vcore: 1.76v (1.66)
vMCH: 1.45
SB: 1.55
Vdimm: 2.175
Cooling: Watercooling in sign.
Coolingpaste: Arctic Silver 5
Motherboard: Asus Commando bios ver 1404
Minnen: 2GB Corsair TwinX 6400 CL5
Max suicide Validation 4369Mhz: http://valid.x86-secret.com/show_oc.php?id=228854

Valid 4.1 länk: http://valid.x86-secret.com/show_oc.php?id=227831

[Locust]

Processor: E6850
Stepping: SLA9U , L722A186 REV G0
Orginal MHz: 3.0ghz
OC MHz: 4.369Ghz (4.1 stable)
FSB: 485 (457)
Mutipel: 9
Orginal Vcore: 1.35v
CPU Vcore: 1.76v (1.66)
vMCH: 1.45
SB: 1.55
Vdimm: 2.175
Cooling: Watercooling in sign.
Coolingpaste: Arctic Silver 5
Motherboard: Asus Commando bios ver 1404
Minnen: 2GB Corsair TwinX 6400 CL5
Max suicide Validation 4369Mhz: http://valid.x86-secret.com/show_oc.php?id=228854

Valid 4.1 länk: http://valid.x86-secret.com/show_oc.php?id=227831

Nice clocks! But that voltage would scare me! ;)

[Infa]

Thanks! :) Im really getting the thing of the OC, been doin it less than a year,but i have always been computer freak :)

i will get Coolab Liquid pro tomorrow, maybe i will get higher clocks! with what i hope will be around 5c lower! we'll see :) i will update if anything changes!

that vcore is only for max clock :) it is really high and my watercooling cant keep up with it, around 45 idle, and 55c just in super pi :) but 1.66 is all ok, around 30c idle and under 60c load with new prime95.3.

Regards!

[hlonipha]

not true at all unfortunately. When I was overclocking my E6850, It failed a few times around the 2 hour mark. then at 2 hour 30 min.

Then i bumped Vcore upto 1.525 and passed for 10+ hours through orthos.

So in conclusion your theory is wrong about "after an hour is a very good indication"

amen:eek:

[shimmishim]

L719B 6850

validation at 4338 on water (http://valid.x86-secret.com/show_oc.php?id=229050)

amazing... simply amazing...

[scwam]

L719B 6850

validation at 4338 on water (http://valid.x86-secret.com/show_oc.php?id=229050)

amazing... simply amazing...

I've got the same chip (L719B014, what your last numbers). What vcore are you doing that in bios?

[shimmishim]

I've got the same chip (L719B014, what your last numbers). What vcore are you doing that in bios?

L719B095 :D

that was around 1.6575 bios

[doakh]

How does one pick and choose which cpu 'lot' or 'week' they get? Is their someone special to order from?

HAPPY MOTORING

[burn what?]

another 1 at 3.8 on air :up:

http://img261.imageshack.us/img261/3957/e6850resultszz3.th.jpg (http://img261.imageshack.us/my.php?image=e6850resultszz3.jpg)

[AndyM]

Wow, this chip is great!

http://i80.photobucket.com/albums/j186/amichalski00/41_1140ddr2_32M_crop.jpg

Oh, this is the 6850 thread? Ooops :rofl: . It's hard to decide if I should try one, I want Orthos stable @ 4Ghz without getting too high in the parabolic portion of the voltage curve. Keep the OC's coming...preferrably with Orthos 8hrs+ screenies :up:

[DerekT]

Keep the OC's coming...preferrably with Orthos 8hrs+ screenies :up:

I fail to see your Orthos 8hrs+ screenie even though you posted your E6600 in the wrong thread. You are on water with that E6600 are you not? Let's see you get 4.0 on air with that chip. :P

There are more than a few getting 3.8 and 4.0 on air with the 6850's though. ;)

[stephen23]

Wow, this chip is great!

http://i80.photobucket.com/albums/j186/amichalski00/41_1140ddr2_32M_crop.jpg

Oh, this is the 6850 thread? Ooops :rofl: . It's hard to decide if I should try one, I want Orthos stable @ 4Ghz without getting too high in the parabolic portion of the voltage curve. Keep the OC's coming...preferrably with Orthos 8hrs+ screenies :up:

is hard to bench a non-G0 stepping CPU at 1.6Vcore on air..........!

[michaLcoughliN]

all i can say is with raised vcore it sets off a lot of heat in my room lol.

[AndyM]

My chip on air @ 4GHz? I'd have to call the fire department beforehand. :p:

I cant get Orthos stable beyond 3.85 and I'm not willing to exceed 1.65 vcore/bios to try, but I can make some killer screenshots of 4.1 and 4.2, lol. I just cant decide whether to take the 6850 plunge or wait for 45nm. Oh well, I'll stop clogging up this thread with useless stuff, just wanted to say that SuperPi stable kinda overstates just how fast the chip 'really' is should stability be a concern.

[rge]

I think the sweet spot on air or water for my E6850 is 3.8 to 3.9, which avoids high voltages. Depite small performance difference (imo) between 3.83 and 4, like everyone else I had to take a few runs at 4, but never passed more than 1 hour of orthos custom (set at 8-64k) or 6 hours of small ffts (8k).

I am orthos stable at 3.9Ghz with 1.475 Vcore Bios, 1.44measured Vcore, no other voltage changes. But cpu temps were 64C (ignoring coretemps 56C).

I opted for 3.83, I am orthos stable at 10hrs large fft, 18 hrs blend, 8 hours custom (8-64 ffts), (dont like orthos small ffts of 8k only, needs to be updated)

Here is my 3.83 24/7 at reasonable volts/temps of 1.4375 bios, 1.41 measured. And below my 4.0 which was not stable up to 1.55, did not try above that.

[AndyM]

rge, that is one nice chip you have there for sure!

[funkflix]

L719B016

http://www.gravedigga.de/gravedigga/L719B016/3807mhz_1.39V_1.30h_small.jpg

http://www.gravedigga.de/gravedigga/L719B016/4005mhz_1.49V_1.30h_small.jpg

Can run all Benches (3DMarks, 32M etc.) with 4203MHz 1,63V.

[learners permit]

^^Nice speed vs voltage and your temps are going well. So far I'm@ 3.7 1.33V. Idle temp is 26C. Gonna wait for cooler weather to push the voltage as this core seems to dislike anything above 48C. fully loaded. I unfortunately cannot afford to torch a cpu so I do what I can with minimal volts. So far this G0 core can do what I was hoping for and I'm very happy with it.

[scwam]

This is on air: L719B014
http://i75.photobucket.com/albums/i304/scwam/12hours3906stability.jpg

Water is about somewhere between 4040 to 4090

Air again:

http://i75.photobucket.com/albums/i304/scwam/ultimate.jpg

[ante_ante]

BX80557E6850 SLA9U
MM #: 891188
FP0# L722A186

This is my best today on my SS. Something is stopping me, mobo or cpu.

http://img132.imageshack.us/img132/7291/bench6ke8.th.jpg (http://img132.imageshack.us/my.php?image=bench6ke8.jpg)

And max FSB
http://valid.x86-secret.com/show_oc.php?id=229611

[bro20000]

Nice results scwam got mine to same just need better cooling!

[o polonos]

Hello im new in forum :D
This is my E6850

4652Mhz with ~1.63v with DICE on Asus P5K-E



http://img239.imageshack.us/img239/7917/1myw3.jpg

http://img155.imageshack.us/img155/410/pifamk5.jpg

And here 3600Mhz with 1.38v 24/7 stable ;) on Abit IP35 PRO with H2o

http://img125.imageshack.us/img125/8257/orthos17rd9.jpg

[OnDborder]

o polonos, do you know what batch yours is?

[Hazzan]

@o polonos : Welcome to XS...nice your first post....btw can you show us Bacth your chip ?

[eva2000]

Caved into temptation and grabbed myself my first E6850 cpu - L723A347 with 7/27/07 pack date which is same batch used for 9x618FSB http://www.xtremesystems.org/forums/showthread.php?t=155402 :)

E6850 SLA9U
FPO/Batch: L723A347
Version: D97262-001
Pack Date: 07/27/07

System

Intel Core 2 Duo E6850 L723A347
Corsair Nautilus 500 3/8" ID
Asus Blitz Formula (http://i4memory.com/showthread.php?t=4294) 1101 bios
128MB Gainward FX5200 PCI
2x1GB Crucial Ballistix Tracer PC2-8500 kit #2 (naked modules (http://i4memory.com/showthread.php?t=4218)) in blue dimm slots
Memory cooling = 120x25mm Spire 96cfm fan on rheobus @100% fan speed.
74GB WD Raptor 8MB on SATA 1 port
Pioneer DVR-08 Burner
Sony FDD
1KW PCP&C SLI psu
WinXP Pro SP2


Shows very good promise E6850 L723A347 on Asus Blitz Formula with Corsair Nautilus 500 water so far boot right into memtest @9x437FSB = 3933Mhz at stock vcore 1.296v bios (which is manually set to 1.325v bios setting so VID = 1.325v)! But first stock cpu speeds with some undervoltage loving :)

Room temp = 24.8C to 27.5C

3006Mhz @9x333FSB at 1.225v bios set vcore = 1.192v idle/load

Idle
http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/533/333-333_44412_1042101011_1.225-1.3-1.55-2.14-1.05-1.5/prime95_idle.png

Load
http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/533/333-333_44412_1042101011_1.225-1.3-1.55-2.14-1.05-1.5/prime95_load.png

3600Mhz @9x400FSB at 1.3625v bios set vcore = 1.336v idle/1.328v load

Idle
http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/533/400-400_44412_1042101011_1.3625-1.3-1.55-2.14-1.05-1.5/prime95_idle.png

Load
http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/533/400-400_44412_1042101011_1.3625-1.3-1.55-2.14-1.05-1.5/prime95_load.png

4005Mhz @9x445FSB at 1.500v bios set vcore = 1.472v idle/1.464v load

Very happy indeed untweaked single 32M @4005Mhz at 1.464v load!

http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/533/445-445_4445_330338_1.5-1.36-1.57-2.2-1.125-1.5_x61/spi32m_12m53s203ms.png

http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/533/445-445_4445_330338_1.5-1.36-1.57-2.2-1.125-1.5_x61/cpuz_validated.png

[jugeen]

eva, n1 chip! :up:

[Hazzan]

@eva2000 : nice you have chip EVA ...can you post 4Ghz with orthos Please !!!!!!

[simonmaltby]

Here are my results for e6850
Will get the codes added later when i take the chip out to try my q6600

4Ghz Prime stable (sorry i'm too lazy to run prime for long) - but i have been running this for 3 days gaming and encoding without a glitch - so to me its stable :)
http://www.motormice.com/images/e6850@4000-prime.jpg

Best Speed with the volts i'm prepared to try atm...
http://www.motormice.com/images/e6850@4221.jpg

[kiwi]

So, L723A seems to be the best so far
L722 needs more volts

Anyone has L721A? It is available at my local store :)

[eva2000]

yeah L723A ain't bad


4374Mhz @9x486FSB at 1.750v bios set vcore = 1.712v idle/1.704v load

Not bad for Corsair Nautilus 500 water cooled I'd say :)

System

Intel Core 2 Duo E6850 L723A347
Corsair Nautilus 500 3/8" ID
Asus Blitz Formula (http://i4memory.com/showthread.php?t=4294) 1101 bios
128MB Gainward FX5200 PCI
2x1GB Crucial Ballistix Tracer PC2-8500 kit #2 (naked modules (http://i4memory.com/showthread.php?t=4218)) in blue dimm slots
Memory cooling = 120x25mm Spire 96cfm fan on rheobus @100&#37; fan speed.
74GB WD Raptor 8MB on SATA 1 port
Pioneer DVR-08 Burner
Sony FDD
1KW PCP&C SLI psu
WinXP Pro SP2


/numproc = 1

Room temp = 25.5C

Max CPUZ validation = 4374Mhz at 1.712v
Max 1M = 4338Mhz at 1.712v
Max 32M = 4266Mhz at 1.712v

http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/667/486-607_5545_330326_1.75-1.42-1.59-2.34-1.15-1.8_x61_sron/cpuz_validated.png

http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/667/482-602_5545_330326_1.75-1.42-1.59-2.34-1.15-1.8_x61_sron/spi1m_11s625ms.png

http://fileshosts.com/intel/Asus/Blitzformula/results/nautilus500/E6850_L723A347a/crucial/ballistix/8500t_3/9x/667/474-593_5545_330326_1.75-1.42-1.59-2.34-1.15-1.8_x61_sron/spi32m_11m29s141ms_pcprobe2.png

[Lu(ky]

Nice OC EVA is that last one a suicide run? at 1.71V on Vcore? I thought I read somewhere MAX was 1.6V? Here is my 1st OC no problems what so ever..

http://i.pbase.com/o6/06/629506/1/84315332.TWur6pgc.Orthosstable3.6.JPG
http://i.pbase.com/o6/06/629506/1/84315334.uaoYAvyt.3.6oc.JPG

[BeardyMan]

E6600 L632A400 at air (http://users.telenet.be/kuan/4.2.JPG)
vs
E6850 L720A985 at air (http://users.telenet.be/kuan/4.1.JPG)

The winner...