View Full Version : ABIT IB9 problem
rogard
07-10-2007, 10:55 AM
Hi,
Im and doing some testing with an Abit IB9, boots perfectly under air, no probs at all, however under phase it hangs just after the post screen and therefore I cant go into the bios,
its my theory that the negative temps are being reported wrong i.e. -5 is 250C and therefore the pc wont start.
I have the latest bios, but is there any way around this?
Hi,
Im and doing some testing with an Abit IB9, boots perfectly under air, no probs at all, however under phase it hangs just after the post screen and therefore I cant go into the bios,
its my theory that the negative temps are being reported wrong i.e. -5 is 250C and therefore the pc wont start.
I have the latest bios, but is there any way around this?
You could look at disabling the temprature monitor ?
rogard
07-10-2007, 03:10 PM
There does not seem to be a way.
It says "cpu tempature limit" min 30 max 120
I have disabled the alarm, and any other monitoring nob, but still no joy =(
There does not seem to be a way.
It says "cpu tempature limit" min 30 max 120
I have disabled the alarm, and any other monitoring nob, but still no joy =(
Can you tell me the actual BIOS heading, and what section it is located under.
and a link to your BIOS please.
rogard
07-11-2007, 01:38 AM
Bios heading:
CPU Warning Temperature
(within PC health section)
Bios:
http://file.abit.com.tw/pub/download/bios/ib9//m615b12.zip
Thanks
I could "disable the setting" via a BIOS mod.
rogard
07-11-2007, 04:28 AM
That would be awesome.
Thanks