AMD XP 1600+ overclocks to 2100+ speed on air cooling [Archive]

dorokhin

07-02-2002, 06:03 AM

An unlocked AMD 1600+ reaches 2100+ speed!!?? Could this be true!?

Tech report also has linked up to this test...

http://www.phlux.co.uk/articles.php?aid=22

07-02-2002, 06:12 AM

Could it be true? Of course :) With most of the XP 1600+'s that are shipping nowadays...and at their excellent price...you can't go wrong! :D

DaGooch

07-02-2002, 06:19 AM

I have an XP 1600+ here right now at 1800MHz with 1.95V being cooled by an old Swiftech MC462r1 folding 24/7. The 1600+ is the best bang for the buck right now.

BigDov

07-02-2002, 06:43 AM

DGM- sounds like my set up. 1800mhz seems to be the limit for mine on air....... for the $90 I paid for it a couple months ago, it was a steal.

DaGooch

07-02-2002, 07:12 AM

Yes, 1800MHz seems to be the limit no matter how much voltage I pump into this little 1600+ on air. I would not be surprised if she hit 2000MHz on evaporative phase change. :D

JAWS

07-02-2002, 08:18 AM

I get mine today! I hope I get a good stepping.

07-02-2002, 08:47 AM

Let us know how ya make out, JWS :)

Bravo

07-02-2002, 04:59 PM

If any of you guys can find the week 16 or higher AGOIAs, you'll hit 1.9ghz no problems. With my current XP, i can do from 1.47ghz to 1.9ghz with default voltage.

JAWS

07-02-2002, 06:45 PM

Woot! I got an AROIA Y! It's already running 1743 at 1.70 vcore. I'm just trying to get other problems fixed first before I start overclocking.

Bravo

07-02-2002, 07:02 PM

AROIA are over rated.

1.95v :p

SKATAN

07-02-2002, 11:29 PM

LOL

my 1700+ is doing 2400+ on air

http://service.madonion.com/compare?2k1=3823512

JAWS

07-03-2002, 04:40 PM

I got this so far. Not bad for a guy that's used to 146 FSB. :)

Maybe I should keep it here to burn in the ram?

KnightElite

07-03-2002, 04:44 PM

I just picked up a 1600+ yesterday, planning on trying it out tonight.

AGOIA0220MPM
4....
I think. Only stepping they had. Hopefully I can do some better unlockage this time than on my 1800+. I'll test it to make sure it works first though ;).

07-03-2002, 05:59 PM

JWS,
I am glad you got a good chip man!

KnightElite,
Let us know how it clocks :)

KnightElite

07-03-2002, 06:06 PM

You bet. Looking at it right now in front of me the whole thing is:

AX1600DMT3C
AGOIA0220MPM
41058751100

So I did remember it correctly. Week 20 seems like it should be good, but from the thread on AROIA cores on [H]ard|OCP it seems that the MPM cores don't clock as high. As long as it beats my 1800+ though, I'm happy ;).

sforza

07-08-2002, 11:35 AM

Hello everybody, this is my first post here at Xtreme :)

KnightElite, i think the AGOIAs 41F were slighty better, anyway, that week 20 is a good one, too.

C0oL

07-09-2002, 07:42 PM

Hello there, first post for me too - this looks an awesome forum! Glad i found it :D

Anyway, a friend of mine is selling an XP 1600 CPU, it's only a month old. What codes should i be looking for, as i would like to use this CPU to overclock as much as poss :)
I am currently Running a 1GHz AXIA Y @ 1595 - Watercooled, so anything higher than that SHOULD keep me happy.

Any tips / comments / questions are welcome.

Regards,
C0oL

JAWS

07-10-2002, 04:06 AM

Originally posted by C0oL
Hello there, first post for me too - this looks an awesome forum! Glad i found it :D

Anyway, a friend of mine is selling an XP 1600 CPU, it's only a month old. What codes should i be looking for, as i would like to use this CPU to overclock as much as poss :)
I am currently Running a 1GHz AXIA Y @ 1595 - Watercooled, so anything higher than that SHOULD keep me happy.

Any tips / comments / questions are welcome.

Regards,
C0oL

Hey COoL! Welcome to the forums!

Look for the AGOIA and AROIA steppings for the 1600! Right now (as you can tell) it's the best bang for the buck!

Gotta love that AXIA Y! I'm running a 1200 right now.

C0oL

07-10-2002, 07:47 AM

Thanks for the welcome mate!

Yeah, love the AXIA, just need that XP now.

Thanks for the tips also ;)

Regards,
C0oL

shadco

07-11-2002, 04:46 PM

Here is a little ol 1600 on air agoia of course.

Shad

Coolit

07-12-2002, 12:30 PM

I was able to get 1950mhz with the Vcore @ 2volts from an xp1600 AGOIA 4 and I think it will hit 2gig, but im waiting for my new tec psu to see :(

I had a 1gig AXIA before and the 1600 xp win hands down, great value for money :)

Can some1 post if they have been past 2gig with a 1600XP AGOIA plz, it must be possible.

Jeff

07-19-2002, 01:06 PM

@shadco:

Boy does that look familiar. What Vcore did you get that at? I need to pump 2.1v into mine for it to run Prime95 stable. Damn fine stepping these AGOIA's are. :banana:

Gamer

07-19-2002, 01:42 PM

agoia 1700+, not unlocked.
it's eats voltage for breakfast :) (2.1vcore)

shadco

07-19-2002, 02:53 PM

What Vcore did you get that at?

1.95v +- .02

Shad

Jen

07-19-2002, 05:54 PM

Just got mine today from newegg. Will test it out tomorrow in my water cooled case. Hope I have some good luck with this one

AX1600DMT3c
AGOIA 0213TPDW
Y8052270287

Jen

DaGooch

07-19-2002, 07:53 PM

GL on 1800MHz and above!

SPQQKY

07-20-2002, 09:26 AM

My first XP last year was an AGOGA Y 1600+ and it did 1780MHz no problem on both my 8k7a and 8kha+. To bad I killed it.

Jen

07-20-2002, 04:33 PM

I have this one at 1838mhz 1.92 volts. Still havent found out whats stable yet. The bios in this Abit KX7 333R is very confuseing to me.

JAWS

07-20-2002, 04:55 PM

Originally posted by Jen
I have this one at 1838mhz 1.92 volts. Still havent found out whats stable yet. The bios in this Abit KX7 333R is very confuseing to me.

What do you have your FSB/Multiplier set to?

I have mine at 10.5 X 173 1820 > 1.92vcore. I just volt modded my KX7, so I'm hoping to get more.

Jen

07-20-2002, 07:01 PM

Originally posted by JWS

What do you have your FSB/Multiplier set to?

I have mine at 10.5 X 173 1820 > 1.92vcore. I just volt modded my KX7, so I'm hoping to get more.

stock multiplier.......i dont dare try to unlock this processor. to afraid of ending up with nothing working again

front side bus is 175.........i had it into windows at 181 fsb. even made with stock voltage at 1806mhz

Jen

Maranello

07-21-2002, 05:10 PM

had an aroia 1600+ that would do 1850mhz at 1.75vcc but no more..... have an agoia 1600+ that does 1970mhz now at 2.0vcc but no matter how hard i try or what i shut off/tweak in bios on the 8k3a it just wont hit 1980mhz .... 10.5X 187 is it.

LBJGH

09-13-2002, 11:03 AM

I just picked up a 1600+ and am in the middle of unlocking it... whoo! what a pain... anyway its a

AGIOA Y
AX1600DMT3C

If I don't screw it up unlocking it I'll be posting results tonight.

09-13-2002, 11:41 AM

Good luck with your new chip, LBJGH :)

LBJGH

09-13-2002, 12:01 PM

Well here is the finished product... I hope it works
:toast:

hdfxst

09-14-2002, 07:32 AM

LBJGH,dont install it yet.i saw that pic and had to register.the triangle and where it says L1 are grounds and it looks like you have them covered.so you might want to scrape it away from there.i think you will just be locked at 11 but why take the chance on frying it.

LBJGH

09-14-2002, 08:42 AM

will the triangle ground the L1's?

hdfxst

09-14-2002, 05:25 PM

the triangle and L1 are grounds,when you connect the dots dont let the conductive paint touch them

Henry

09-16-2002, 01:11 AM

Mine :

AGOIA 0212 Y
1.95 Ghz for benching, 1.92 Ghz for 24/7 use :)

14162 pts AXP1600+/Ti4200 (http://service.madonion.com/compare?2k1=4479480)

mook

09-16-2002, 01:52 AM

Figure I'd add mine to the thread also....AROIA 0213 Y

LBJGH

09-16-2002, 04:31 AM

Cool, it looks like I may have found a 'good' CPU! I removed the conductive material from the triangle and the L1 so it should be good to go... the only problem is my epox mobo is giving me a C1 error and would not post. I didn't want to put the new cpu in until I sorted out the C1 error. I've just RMA'd the mobo and ram since I don't know which one died on me... looks like another couple of weeks before I can try the new CPU. :(

Bucket-head

09-16-2002, 04:44 AM

LBJGH lets hope you have as much success with your xp as you have with that TB.... Awesome overclock m8.I'm trying for a 50% o/c but need some better ram than my 256 hyundai 2100.

LBJGH

09-16-2002, 05:10 AM

.... I'm assuming you started with a 1600+? Isn't that comparable to a 2400+ with those speeds?

Bucket-head

09-16-2002, 06:07 AM

Yer LBJGH forgot to say that it's a locked xp1600 AGOIA Y which cost me fifty pounds.I'm not too sure on the comparable clock speeds but it's a little unstable at this speed.Just under 2 gig seems fine though.But... if you were to kindly donate your stick of ram to me!! LOL

LBJGH

09-16-2002, 07:41 AM

Sorry I just RMA'd my mobo and ram because of a C1 error code on my Epox mobo. I couldn't determine if was the ram or board... if the ram is toast, you're welcome to it (shipping not included.)

Bucket-head

09-16-2002, 07:49 AM

I was only kidding m8 ! but thanks anyway for your generous offer :)

LBJGH

09-16-2002, 08:09 AM

me too...
Originally posted by Bucket-head
I was only kidding m8 ! but thanks anyway for your generous offer :)

AKRedneck

09-18-2002, 07:19 PM

Just got a AGOIA week 21 from newegg. This sucker is well into prime @ 160x10.5 ~ 1683mhz @ stock voltage (1.76v in bios) Still unlocked since it's actually for someone else. :D Since I'm not fsb limited I'll see what she tops out at soon. These things rock!.. My xp1800 won't even do 1600mhz without extra juice!

And I am on AIR at the moment also. Swifty 462 with an 80mm casefan..not the delta!

:banana: