What settings would be better?

[Tsunami Fall]

Hello OCZ !

I'm currently running the following system spec :
AMD AM2 x2 4200+
1GB PC6400OCZ (2.2v)
Asus M2N32-SLI Del
X1950xtx 512Mb
Also using a Thermaltake TR2 550W Power supply.

I was wondering what would have the best performance.

With the settings like this (250x11=2.7ghz, ram running at 916mhz 5-6-6-16)
Here some screen shots.

http://img388.imageshack.us/img388/7751/cpuzls9.th.jpg (http://img388.imageshack.us/my.php?image=cpuzls9.jpg)

I was wondering what would give the best performance, having the ram at 458mhz at the timings shown, or would it be better to run it at the tighter timings at 400mhz 5-5-5-15 as shown on the SPD tab.

Another question, if 468mhz is the faster choice, could you offer any suggestion in order to increase memory stability and to allow for a higher overclock?
(Memory is at 2.2v )
Any help would be awesome ! Thanks again

:up:

[andyOCZ]

Hello, both settings will likely yield close to the same performance. I would test both using Orthos or SuperPi and decide which work best.

Your voltage is about as high as you need. Other than playing with settings to help stabilty I can't think of much.

Do you have 2T timings enabled? That should help.