View Full Version : were to get Tygon TUBING for best price?
CSOFT
06-12-2003, 06:59 AM
Anyone know were to get the best price on 1/2" ID Tygon TUBING? I'm looking to get the best hose I can hoping to avoid using elbows.
Thanks
Crazymofo
06-12-2003, 07:53 AM
Just get clearflex its the same tube for half the price... you can get it for 69 cents a foot from this place but I cant remember the name.. i get back to you
CSOFT
06-12-2003, 08:48 AM
I got 2 1/4" between the end of the barbed fitting and my case cover to do a turn. So i didn't want to take any chances.
antipop
06-12-2003, 09:18 AM
Clearflex is the same thing as tygon, you can find some at www.cooltechnica.com
I think that dtek sells tygon but you've got to check
CBONE
06-12-2003, 10:22 AM
Originally posted by Crazymofo
Just get clearflex its the same tube for half the price... you can get it for 69 cents a foot from this place but I cant remember the name.. i get back to you
If you remember the place, could you reply to the post or send me a PM? I'm in need as well.
PimpJack
06-12-2003, 11:18 AM
clearflex from cooltechnica is a LOT better than tygon in my opinion. Tygon seems to always discolor due to waterwetter or dyelite. Mine is orange now =( but I changed to clearflex a while back (due to price) and I found it to be much better.
CSOFT
06-12-2003, 02:54 PM
I did decide to go with the clearflex for $.65/foot on http://www.mcmaster.com/
in the search bar put this in - 5231K237
then u will come up with
"PVC Tubing Chemical, 1/2" ID, 3/4" OD, 1/8" Wall, Clear"
dont worry its the same thing as clearflex 60, when you get it...clearflex60 will be printed onto the tubing
Thank "PokPok" from AMDForums
Crazymofo
06-13-2003, 01:45 PM
Thats the place I was talking about ....:D
gouda96
06-13-2003, 02:46 PM
saw this post and picked up 10ft. What should i just to cut the tubing, a hot knife or should i get a tube cutter?
lel4866
06-28-2003, 08:11 AM
There's no such thing as just "tygon" tubing. That is, they make quite a few formulations. I use the r-1000 kind. I get it from US Plastics. Good service, but 10' minimums.
www.tygon.com
www.usplastic.com
Larry Lewis
antipop
06-28-2003, 12:20 PM
Welcome to Xtreme lel4866
I'm having a hard time to find tygon in france it's almost impossible to get some and if i order from the us, the shipping cost is more than the tubing price itself!!
Johnny Knoxvill
06-28-2003, 02:43 PM
Originally posted by antipop
Welcome to Xtreme lel4866
I'm having a hard time to find tygon in france it's almost impossible to get some and if i order from the us, the shipping cost is more than the tubing price itself!!
you could order some from the UK, but be prepared to pay big :(
antipop
06-28-2003, 11:50 PM
Originally posted by Johnny Knoxvill
you could order some from the UK, but be prepared to pay big :( Do u have a link? I'll ask anyway :)
Johnny Knoxvill
06-29-2003, 01:33 AM
Originally posted by antipop
Do u have a link? I'll ask anyway :)
http://store.over-clock.co.uk
http://www.pclincs.co.uk/