PDA

View Full Version : G.skill F1-3200phu1-512nt Review & Discussion



Spacehead
01-05-2007, 06:17 AM
DDR 512 PC-3200
CL2.5-4-4-8 2.5V-2.6V
I hope they work as 2 GB set. 4x512. Testing soon.
Sticks cost 52 € for a piece.


http://img201.imageshack.us/img201/9259/dscf3270yw8.th.jpg (http://img201.imageshack.us/my.php?image=dscf3270yw8.jpg)

First with two sticks:

SPD values:
http://img212.imageshack.us/img212/542/spdgskillxw7.jpg (http://imageshack.us)

Edit: Mods , please edit Thread topic accordingly. G.SKILL F1-3200PHU1-512NT


by GST, topic changed , tnx


Edit2: 2x512MB , 3-4-4-8 , 2.8V (didn't try lower or higher voltage yet) , currently SuperPI32M calculating @ 241 Mhz.

http://img365.imageshack.us/img365/6428/241yg4.jpg

, .... and it finished. I have to put settings to manual and try with 4x512MB

Spacehead
01-06-2007, 01:06 PM
I had to set Command rate to 2T to get these boot 4x512MB on DFI Lanparty NF4-D
2.8V:
http://img211.imageshack.us/img211/7199/gskillzw5.jpg (http://imageshack.us)


PS. CPU goes 3.1 Ghz with that Vcore.

Spacehead
01-06-2007, 01:52 PM
Very worth the price I'd say!
My previous sticks were Buffalo Valueram 3-3-3-8 PC3200 2x1GB that maxed @ 216 Mhz :D
so these are much better. Thanks G.SKILL

PS. Edit. topic G.SKILL F1-3200PHU1-512NT REVIEW & DISCUSSION

Spacehead
02-01-2007, 10:59 PM
Why I can't get dividers 166/200 and 180/200 to work with these?

It posts only with 1:1 (200) and I have to set 180/200 from Windows.

Spacehead
04-07-2007, 06:57 PM
up for the question.

GSKILL TECH
04-10-2007, 11:46 AM
for divider question is more relate to motherboard and ram. if they dont like each other you can't do too much divider about it.

Schmetterling
04-10-2007, 12:57 PM
I've had 2 similar sets, both maxed out at 254Mhz @ 2.5-4-3-6, but I have to add that I didnt have much experience in overclocking ram at that time ;)