opty 165 3g@1.4v

[vcas5]

http://valid.x86-secret.com/show_oc?id=147205


ok now....i knew this was a good chip...i posted yesterday about prblems with dual channel on my ultra-d.and how it wont boot this chip in dual channel mode so here i am with single channel mode only:mad:

help me please i have tried everything and im on bios 04/06

thanks

[triple_A]

Very nice!!
too bad it won't do DC

[Raybo]

http://valid.x86-secret.com/show_oc?id=147205


ok now....i knew this was a good chip...i posted yesterday about prblems with dual channel on my ultra-d.and how it wont boot this chip in dual channel mode so here i am with single channel mode only:mad:

help me please i have tried everything and im on bios 04/06

thanks

Run two instances of a benchie of your choice (how about Super Pi 32m) and get back to us.

Ray

[vcas5]

Run two instances of a benchie of your choice (how about Super Pi 32m) and get back to us.

Ray

well im nore interested in getting this daul channel mode yhan stability lol if i can get it working properly then (i will get it stable)lol

[vcas5]

Very nice!!
too bad it won't do DC
lol ty and tell me about it:mad: :slapass:

[triple_A]

well im nore interested in getting this daul channel mode yhan stability lol if i can get it working properly then (i will get it stable)lol
I think Raybo means that cpu-z may be wrong saying that its running single channel.
If your superpi score is about the same as other 3ghz opty's then its prbably a cpu-z bug..

you can also try to enable dual channel using A64 tweaker, just to make sure whether or not it's capable of running DC.
Maybe its your ram that keeps it from running DC?

[vcas5]

I think Raybo means that cpu-z may be wrong saying that its running single channel.
If your superpi score is about the same as other 3ghz opty's then its prbably a cpu-z bug..

you can also try to enable dual channel using A64 tweaker, just to make sure whether or not it's capable of running DC.
Maybe its your ram that keeps it from running DC?
its not wrong i only have one stick of ram instaled as it wont post with this chaip with both installed i.e. in dual channel mode,yet,i can put my x2 4800 in and it will boot in an instant:confused:

[Raybo]

its not wrong i only have one stick of ram instaled as it wont post with this chaip with both installed i.e. in dual channel mode,yet,i can put my x2 4800 in and it will boot in an instant:confused:

My bad, I thought you could not get both cores up and running.

So both sticks of ram work and you can't get them to work when the two of them are installed? Did you try all the combinations for your slots? Does one stick of ram seem to be better than the other (might want to lower your timings and try both again)? Do ALL your slots work if you install one stick?


I'm no expert but if your 4800 works than you might have a bad mem controller on your FX or might be your bios.......can you run each core independintly of the other?

:shrug:

[NonDecepticon]

Hello rebadged Brisbane :wave:

[LordofDoom]

Or not... Brisbane is 65nm, GG.

[vcas5]

there is nothing wrong with the chip it is the mobo ffs....the 2 gig ddr is good it has passed memtest a number of times,well im on it now with my wifes msi neo4 platinum it poped straight in and a clear cmos and away it went in dual channel.....how can i let her have a faster pc then me :( lmao..well im gonna see how much i can get out of it on the msi bbl:)

[bri1]

damn what steppings?

[Burnt_Ram]

i had a problem like yours yesterday with my 165. it wouldn't run atall with both sticks of my OCZ in, well it would run untill i rebooted then the monitor would go blank and i had to reset cmos, and start over. i found out it was my ocz. i took one stick out and it ran fine. i then put the memory out of my wifes rig in and its been running with both sticks dual channel ever since with NO probs! these opty's are picky huh .. it's just to bad i have to use this crappy samsung generic :( ohwell. i dont see any performance decrease due to the higher timmings im forced to use that god.

PS: what's your stepping code ?

[vcas5]

damn what steppings?
ccbbe 0615 dpmw

[vcas5]

there is nothing wrong with the chip it is the mobo ffs....the 2 gig ddr is good it has passed memtest a number of times,well im on it now with my wifes msi neo4 platinum it poped straight in and a clear cmos and away it went in dual channel.....how can i let her have a faster pc then me :( lmao..well im gonna see how much i can get out of it on the msi bbl:)


2.85ghz@1.4v too bad it wouldnt work on the ultra-d:slapass:

[vcas5]

ive been off a few days cos after i put in the ultra-d all sorts a things started happening and i finaly got the thing stable and my hdd died on me lol so im waiting for a new one now im on a new build for my friends little brother.

opty 146,dfi infinity nf4 board,x1600pro gfx 256mb, 512mb ddr ram,80gighdd,and a 15"tft keyboard mouse ,printer and speakers all for £460:eek:

not bad for an 11 year old lol

[Burnt_Ram]

ive been off a few days cos after i put in the ultra-d all sorts a things started happening and i finaly got the thing stable and my hdd died on me lol so im waiting for a new one now im on a new build for my friends little brother.

opty 146,dfi infinity nf4 board,x1600pro gfx 256mb, 512mb ddr ram,80gighdd,and a 15"tft keyboard mouse ,printer and speakers all for £460:eek:

not bad for an 11 year old lolyour 11 ??? wow, good job!

[Solarfall]

i' ve seen this a thousand times allready but i still don't know what does this "up" means?????? amd opteron 165 (up)
And yes real nice results with your opteron with such low volt.

[vcas5]

i' ve seen this a thousand times allready but i still don't know what does this "up" means?????? amd opteron 165 (up)
And yes real nice results with your opteron with such low volt.


uni processor i.e. because opterons are up 8 way the up can only work in single socket mobo's

[vcas5]

your 11 ??? wow, good job!

no lmao im 32 the pc is for an 11yo

[Raybo]

ive been off a few days cos after i put in the ultra-d all sorts a things started happening and i finaly got the thing stable and my hdd died on me lol so im waiting for a new one now im on a new build for my friends little brother.

opty 146,dfi infinity nf4 board,x1600pro gfx 256mb, 512mb ddr ram,80gighdd,and a 15"tft keyboard mouse ,printer and speakers all for £460:eek:

not bad for an 11 year old lol

Looks like you are having some bad luck lately.

I hope your holidays are better.

Ray

[vcas5]

ok i got a new hdd,but it didnt dort out my troubles lol,then i bought a new mobo dfi rdx200 (its cheap)but it still didnt sort it out.I put the opty in the rdx200 and no problems what so ever it looks like the ultra-d has killed my 4800:slapass:

anyone had amd rma experiance ?i.e. how long it takes?

[Burnt_Ram]

no lmao im 32 the pc is for an 11yo
lol, ok sorry mate ;)

[jamex]

http://valid.x86-secret.com/show_oc?id=147205


ok now....i knew this was a good chip...i posted yesterday about prblems with dual channel on my ultra-d.and how it wont boot this chip in dual channel mode so here i am with single channel mode only:mad:

help me please i have tried everything and im on bios 04/06

thanks

Relax a lot your MAL (max async latency) and your Read preamble, both mem settings.

Other thing, I know, we should not trust Cpuz vcore readings, but yours says 1.360 v , usually this optys take 1.5 v to be 100% stable at orthos....