Does OCZ Platinum DDR2 1000@5-5-5-15 2.1V uses Micron ICs?

[-Sweeper_]

What about these?

http://cgi.ebay.de/OCZ-DDR2-2GB-2X1GB-PC2-8500-1066MHZ-240-PIN-SDRAM_W0QQitemZ190062183976QQihZ009QQcategoryZ7494 2QQtcZphotoQQcmdZViewItem

http://cgi.ebay.de/OCZ-2GB-1GB-PC8000-DDR2-GOLD-1000MHZ-GAMER-EXTREME-XTC_W0QQitemZ190061829955QQihZ009QQcategoryZ172QQt cZphotoQQcmdZViewItem

Tks ;)

[RyderOCZ]

Everything 8000 and higher from OCZ is Micron.

[-Sweeper_]

Everything 8000 and higher from OCZ is Micron.

Thanks Ryder. ;)

[boblemagnifique]

My OCZ 2x1go Pc7200 use D9GMH (i see the chips )

[-Sweeper_]

My OCZ 2x1go Pc7200 use D9GMH (i see the chips )

What of them would be the best choice?
The Platinum 1000@5-5-5-15 or the Platinum 900@4-3-4-15? ;)

[boblemagnifique]

What of them would be the best choice?
The Platinum 1000@5-5-5-15 or the Platinum 900@4-3-4-15? ;)

My article will leave the next week (in French) but I can say to you that she is really good for the price (after it is a no trade kit which comes from US OCZ) thus can be pretested (but the best kit of this article is that which I bought in the trade) :)

[Phosphate]

As far as I know those are Micron's best: D9GKXs (which are even better than D9HMH)

[Exedy]

I know VX is GKX...but Platinum 8000 too? nice

[RyderOCZ]

We are mostly buying GMH's lately.....not so many GKX....so anything with Micron could be GMH or GKX, mostly GMH

[-Sweeper_]

Even the Gold 1000MHz part is Micron D9 based? :eek:
What modules are you using on them?

Sorry for my bad english. ;)

[RyderOCZ]

Even the Gold 1000MHz part is Micron D9 based? :eek:
What modules are you using on them?

Sorry for my bad english. ;)



We are mostly buying GMH's lately.....not so many GKX....so anything with Micron could be GMH or GKX, mostly GMH:) :toast:

[-Sweeper_]

Very Good. :woot: