My mounting kit

[Duniek]

In this thread I will show all my works with phase and water cooling works
--- mounitng for all customs evap (vapo ls and xe/se for cpu or gpu,lga 775 mount for mach2, customs evaps and others)
--- mounitng for many various waterblocks
--- custom fan grills and other plexi works and many other things :D
so enjoy with gallery:

http://www.imagehost.ro/thumbnail.php/132238204802612c9482a.jpg (http://www.imagehost.ro/viewer.php?img=132238204802612c9482a) http://www.imagehost.ro/thumbnail.php/13224030480261aed260e.jpg (http://www.imagehost.ro/viewer.php?img=13224030480261aed260e) http://www.imagehost.ro/thumbnail.php/13224056480261c81b72a.jpg (http://www.imagehost.ro/viewer.php?img=13224056480261c81b72a) http://www.imagehost.ro/thumbnail.php/13224125480261e53b584.jpg (http://www.imagehost.ro/viewer.php?img=13224125480261e53b584) http://www.imagehost.ro/thumbnail.php/1322415248026200f1a40.jpg (http://www.imagehost.ro/viewer.php?img=1322415248026200f1a40) http://www.imagehost.ro/thumbnail.php/132242234802621f57405.jpg (http://www.imagehost.ro/viewer.php?img=132242234802621f57405) http://www.imagehost.ro/thumbnail.php/13224245480262355a1f2.jpg (http://www.imagehost.ro/viewer.php?img=13224245480262355a1f2) http://www.imagehost.ro/thumbnail.php/1322432048026258b1a96.jpg (http://www.imagehost.ro/viewer.php?img=1322432048026258b1a96) http://www.imagehost.ro/thumbnail.php/132243554802627b341e3.jpg (http://www.imagehost.ro/viewer.php?img=132243554802627b341e3) http://www.imagehost.ro/thumbnail.php/13224512480262c8a1b9b.jpg (http://www.imagehost.ro/viewer.php?img=13224512480262c8a1b9b) http://www.imagehost.ro/thumbnail.php/13224954480263e27b504.jpg (http://www.imagehost.ro/viewer.php?img=13224954480263e27b504)
http://www.imagehost.ro/thumbnail.php/13224557480262f5b84ab.jpg (http://www.imagehost.ro/viewer.php?img=13224557480262f5b84ab) http://www.imagehost.ro/thumbnail.php/1322462948026315bcd7e.jpg (http://www.imagehost.ro/viewer.php?img=1322462948026315bcd7e) http://www.imagehost.ro/thumbnail.php/13224701480263358f945.jpg (http://www.imagehost.ro/viewer.php?img=13224701480263358f945) http://www.imagehost.ro/thumbnail.php/1322473448026356c9955.jpg (http://www.imagehost.ro/viewer.php?img=1322473448026356c9955) http://www.imagehost.ro/thumbnail.php/13224747480263640541e.jpg (http://www.imagehost.ro/viewer.php?img=13224747480263640541e) http://www.imagehost.ro/thumbnail.php/1322480248026372796d4.jpg (http://www.imagehost.ro/viewer.php?img=1322480248026372796d4) http://www.imagehost.ro/thumbnail.php/132248174802638152525.jpg (http://www.imagehost.ro/viewer.php?img=132248174802638152525) http://www.imagehost.ro/thumbnail.php/132248294802638d59db0.jpg (http://www.imagehost.ro/viewer.php?img=132248294802638d59db0)
http://www.imagehost.ro/thumbnail.php/132250534802641dac338.jpg (http://www.imagehost.ro/viewer.php?img=132250534802641dac338) http://www.imagehost.ro/thumbnail.php/1322511348026431da496.jpg (http://www.imagehost.ro/viewer.php?img=1322511348026431da496) http://www.imagehost.ro/thumbnail.php/132251324802644455aa2.jpg (http://www.imagehost.ro/viewer.php?img=132251324802644455aa2) http://www.imagehost.ro/thumbnail.php/132252274802647b50df2.jpg (http://www.imagehost.ro/viewer.php?img=132252274802647b50df2) http://www.imagehost.ro/thumbnail.php/132252494802649162624.jpg (http://www.imagehost.ro/viewer.php?img=132252494802649162624) http://www.imagehost.ro/thumbnail.php/13225322480264b2e7967.jpg (http://www.imagehost.ro/viewer.php?img=13225322480264b2e7967) http://www.imagehost.ro/thumbnail.php/13225347480264cbe7832.jpg (http://www.imagehost.ro/viewer.php?img=13225347480264cbe7832) http://www.imagehost.ro/thumbnail.php/13225414480264e6e6f23.jpg (http://www.imagehost.ro/viewer.php?img=13225414480264e6e6f23) http://www.imagehost.ro/thumbnail.php/13225430480264f61c052.jpg (http://www.imagehost.ro/viewer.php?img=13225430480264f61c052) http://www.imagehost.ro/thumbnail.php/13225443480265033a810.jpg (http://www.imagehost.ro/viewer.php?img=13225443480265033a810) http://www.imagehost.ro/thumbnail.php/132301154802668b38a46.jpg (http://www.imagehost.ro/viewer.php?img=132301154802668b38a46) http://www.imagehost.ro/thumbnail.php/1322560448026554da2e5.jpg (http://www.imagehost.ro/viewer.php?img=1322560448026554da2e5) http://www.imagehost.ro/thumbnail.php/1322565548026587b8184.jpg (http://www.imagehost.ro/viewer.php?img=1322565548026587b8184) http://www.imagehost.ro/thumbnail.php/13225723480265a3ceb7b.jpg (http://www.imagehost.ro/viewer.php?img=13225723480265a3ceb7b) http://www.imagehost.ro/thumbnail.php/13225755480265c36db4e.jpg (http://www.imagehost.ro/viewer.php?img=13225755480265c36db4e)
http://www.imagehost.ro/thumbnail.php/13225820480265dce09e7.jpg (http://www.imagehost.ro/viewer.php?img=13225820480265dce09e7) http://www.imagehost.ro/thumbnail.php/13225844480265f50ddb7.jpg (http://www.imagehost.ro/viewer.php?img=13225844480265f50ddb7) http://www.imagehost.ro/thumbnail.php/1322590148026605e2f28.jpg (http://www.imagehost.ro/viewer.php?img=1322590148026605e2f28) http://www.imagehost.ro/thumbnail.php/13225928480266205ddbe.jpg (http://www.imagehost.ro/viewer.php?img=13225928480266205ddbe) http://www.imagehost.ro/thumbnail.php/132259424802662e9a527.jpg (http://www.imagehost.ro/viewer.php?img=132259424802662e9a527) http://www.imagehost.ro/thumbnail.php/132259544802663ae53ba.jpg (http://www.imagehost.ro/viewer.php?img=132259544802663ae53ba) http://www.imagehost.ro/thumbnail.php/13230004480266443761f.jpg (http://www.imagehost.ro/viewer.php?img=13230004480266443761f) http://www.imagehost.ro/thumbnail.php/1323001648026650580f9.jpg (http://www.imagehost.ro/viewer.php?img=1323001648026650580f9) http://www.imagehost.ro/thumbnail.php/132300304802665e37cb5.jpg (http://www.imagehost.ro/viewer.php?img=132300304802665e37cb5) http://www.imagehost.ro/thumbnail.php/1323003948026667c88ad.jpg (http://www.imagehost.ro/viewer.php?img=1323003948026667c88ad)

COVER TOPS FOR WATERBLOCKS
http://img391.imageshack.us/img391/6712/f2slgayk5.th.jpg (http://img391.imageshack.us/my.php?image=f2slgayk5.jpg) http://img99.imageshack.us/img99/5580/f2sgpuax3.th.jpg (http://img99.imageshack.us/my.php?image=f2sgpuax3.jpg) http://img160.imageshack.us/img160/7715/f2s2hh3fq3.th.jpg (http://img160.imageshack.us/my.php?image=f2s2hh3fq3.jpg) http://img99.imageshack.us/img99/8848/px1lga775re7.th.jpg (http://img99.imageshack.us/my.php?image=px1lga775re7.jpg) http://img160.imageshack.us/img160/143/laseabdsn1.th.jpg (http://img160.imageshack.us/my.php?image=laseabdsn1.jpg) http://img99.imageshack.us/img99/3016/abd2nr4cp4.th.jpg (http://img99.imageshack.us/my.php?image=abd2nr4cp4.jpg) http://img99.imageshack.us/img99/7606/abadonix0.th.jpg (http://img99.imageshack.us/my.php?image=abadonix0.jpg) http://img391.imageshack.us/img391/9009/nf7fk1.th.jpg (http://img391.imageshack.us/my.php?image=nf7fk1.jpg) http://img160.imageshack.us/img160/9441/xeon1bh1.th.jpg (http://img160.imageshack.us/my.php?image=xeon1bh1.jpg) http://img99.imageshack.us/img99/7172/xeon2ma3.th.jpg (http://img99.imageshack.us/my.php?image=xeon2ma3.jpg) http://img160.imageshack.us/img160/7351/cube2proprisonv2nbjk1.th.jpg (http://img160.imageshack.us/my.php?image=cube2proprisonv2nbjk1.jpg) http://img99.imageshack.us/img99/7127/cube2pro2or8.th.jpg (http://img99.imageshack.us/my.php?image=cube2pro2or8.jpg) http://img99.imageshack.us/img99/6397/prisonnbic2.th.jpg (http://img99.imageshack.us/my.php?image=prisonnbic2.jpg) http://img99.imageshack.us/img99/1363/cube2prolganh0.th.jpg (http://img99.imageshack.us/my.php?image=cube2prolganh0.jpg) http://img99.imageshack.us/img99/9642/spod1vx3xp7.th.jpg (http://img99.imageshack.us/my.php?image=spod1vx3xp7.jpg) http://img160.imageshack.us/img160/6546/prisonv2topsib7.th.jpg (http://img160.imageshack.us/my.php?image=prisonv2topsib7.jpg) http://img99.imageshack.us/img99/2746/tngtx3sd9pn9.th.jpg (http://img99.imageshack.us/my.php?image=tngtx3sd9pn9.jpg) http://img160.imageshack.us/img160/1395/tngtx4wy6to0.th.jpg (http://img160.imageshack.us/my.php?image=tngtx4wy6to0.jpg) http://img160.imageshack.us/img160/7600/ip35promosfetfn6.th.jpg (http://img160.imageshack.us/my.php?image=ip35promosfetfn6.jpg)

COVER TOPS
http://img514.imageshack.us/img514/196/x1en7ia5.th.jpg (http://img514.imageshack.us/my.php?image=x1en7ia5.jpg) http://img241.imageshack.us/img241/4999/x3zx8qi0.th.jpg (http://img241.imageshack.us/my.php?image=x3zx8qi0.jpg) http://img241.imageshack.us/img241/9899/xfilowprofilern0ed4.th.jpg (http://img241.imageshack.us/my.php?image=xfilowprofilern0ed4.jpg) http://img122.imageshack.us/img122/9568/nvaj4ep3.th.jpg (http://img122.imageshack.us/my.php?image=nvaj4ep3.jpg) http://img241.imageshack.us/img241/658/p1000798ml1od5.th.jpg (http://img241.imageshack.us/my.php?image=p1000798ml1od5.jpg)

FAN GRILLS
http://img120.imageshack.us/img120/3333/custom1ba4.th.jpg (http://img120.imageshack.us/my.php?image=custom1ba4.jpg) http://img88.imageshack.us/img88/280/custom2db3.th.jpg (http://img88.imageshack.us/my.php?image=custom2db3.jpg) http://img120.imageshack.us/img120/9430/darkou9.th.jpg (http://img120.imageshack.us/my.php?image=darkou9.jpg) http://img120.imageshack.us/img120/7830/malik1of8.th.jpg (http://img120.imageshack.us/my.php?image=malik1of8.jpg) http://img291.imageshack.us/img291/1788/nero2oq4.th.jpg (http://img291.imageshack.us/my.php?image=nero2oq4.jpg) http://img120.imageshack.us/img120/8615/drejfusbp8.th.jpg (http://img120.imageshack.us/my.php?image=drejfusbp8.jpg) http://img88.imageshack.us/img88/9020/inteldw0.th.jpg (http://img88.imageshack.us/my.php?image=inteldw0.jpg) http://img120.imageshack.us/img120/6961/metalicaxs5.th.jpg (http://img120.imageshack.us/my.php?image=metalicaxs5.jpg) http://img291.imageshack.us/img291/2406/redliai4.th.jpg (http://img291.imageshack.us/my.php?image=redliai4.jpg) http://img120.imageshack.us/img120/3838/undertheicemc4.th.jpg (http://img120.imageshack.us/my.php?image=undertheicemc4.jpg) http://img120.imageshack.us/img120/2361/snow2mv8.th.jpg (http://img120.imageshack.us/my.php?image=snow2mv8.jpg) http://img291.imageshack.us/img291/7443/ppctp7.th.jpg (http://img291.imageshack.us/my.php?image=ppctp7.jpg)

OTHERS
http://img122.imageshack.us/img122/238/9391fd8ng7.th.jpg (http://img122.imageshack.us/my.php?image=9391fd8ng7.jpg) http://img241.imageshack.us/img241/5106/939wo1hh4.th.jpg (http://img241.imageshack.us/my.php?image=939wo1hh4.jpg)

[tim-]

looks really nice. thinner backplates is required.

[El Snorro]

nice mounting kit.
But you could better use steel rings at bottom of evap instead of rubber ones.
Rubber gets worn after some time and the evap will sled 'into' the mouting..

[4Qman]

Looks Great,. :toast:

[johann]

I like the one where the corners is round. Can you make some custom size to fit different diameter evaps?

[LukeXE]

I like the one where the corners is round. Can you make some custom size to fit different diameter evaps?

It was for me ! :D For V7 evap from SoddemFX :)

[Duniek]

@El Snorro
I will use a stell seger rings but I don't have time to find this

@johann
Yes, I can

btw
some extras :D :D
http://img156.imageshack.us/img156/6129/whitetp4.jpg
http://img214.imageshack.us/img214/166/extrahb1.jpg

green is broke :( , but I get this free :)
thx

[Nosfer@tu]

I must be stupid :p Or I AM ignorant hehe

But how is it going to make sure the evap gets prassure? Will it not just Swap out?
I mean what is holding it back?

[barzi]

like it :), very nice

[LittleDevil]

Can I ask you which material is that?

Regards

[runmc]

I must be stupid :p Or I AM ignorant hehe

But how is it going to make sure the evap gets prassure? Will it not just Swap out?
I mean what is holding it back?

Well - I don't think you stupid.:stick: There is a groove in the evaporator and the rubber ring fits inside the groove. I will agree with you, the metal ring is better. He said he was looking for a metal ring atm. ;)

[Duniek]

Can I ask you which material is that?

Regards
material (white holddown) is 10mm PCV
red muff maybe is PE (polietylene)

[jinu117]

Wait... I expected the white part to be HDPE or LDPE? and Red being PVC or so? Maybe my eyes are decieing me...

[Duniek]

this is a sample GPU holddown
http://img244.imageshack.us/img244/2448/samlpegpuyn6.jpg

[m411b]

Can you make one to fit Socket A (462) for mobiles?

[osckhar]

@Duniek,
They look really nice! :clap:

Oscar

[LittleDevil]

this is a sample GPU holddown
http://img244.imageshack.us/img244/2448/samlpegpuyn6.jpg


Doesn't look like PE (polietylene), but it is nice for sure...

regards

[Duniek]

Can you make one to fit Socket A (462) for mobiles?
I make multi holddown for all platforms but if you want mounting ONLY for socket A (462) it's no problem ;)


They look really nice!

thx


Doesn't look like PE (polietylene), but it is nice for sure...

It's 10mm PCV not a PE

[kayl]

Well - I don't think you stupid.:stick: There is a groove in the evaporator and the rubber ring fits inside the groove. I will agree with you, the metal ring is better. He said he was looking for a metal ring atm. ;)

bearing places sell them Duniek, thats where i got mine from, just need a 2mm groove;)

[Duniek]

new order :D
new backplates CPU and GPU
material is DIBOND 2-2,5mm
http://img368.imageshack.us/img368/2965/order2kt8.jpg

[Pete]

Humm intresuting!!

[sao]

Do you sell a Backplate with Mounting Kit Without Evap?

[MaSell]

Do you sell a Backplate with Mounting Kit Without Evap?

I think yes . I've bought one bp from him today :)

[sao]

How Much?

[LittleDevil]

How Much?

Send him a PM for price.

regards

[Duniek]

http://img183.imageshack.us/img183/4166/ldmx2.jpg

http://img183.imageshack.us/img183/4939/vpzs4.jpg

regards

[LittleDevil]

Really nice mountings ;)

regards

[koensa]

are these compatible with chilly1 evaps?

[Duniek]

are these compatible with chilly1 evaps?
I don't know dimensions of chilly1 evaps but I can make custom kits with differents forms and diffrents middle hole diameter

[Duniek]

http://img209.imageshack.us/img209/5391/grillelr8.jpg
precision of laser :slobber:

[Barnsley-Bill]

Looks realy cool mate nice lazer cutting for sure :)

[Messiah Khan]

*snip*
precision of laser :slobber:

Looks nice, but the 'pure pc' ones look like they'd snap easily.

[Duniek]

Looks nice, but the 'pure pc' ones look like they'd snap easily.

I don't think so, "pure pc" grills is 4,5mm thick and snowflake 3mm

[Pete]

Think you could make a custom top hold down for the Intel 975X NB? I have a project i'm doing and the fact you have tio make custom hold down for phase fit the bill perfectly

[Duniek]

Think you could make a custom top hold down for the Intel 975X NB? I have a project i'm doing and the fact you have tio make custom hold down for phase fit the bill perfectly

ygpm ;)

I have question to vapo775 mounting owners
Can we tell me about this dimensions on my project is good?

http://img508.imageshack.us/img508/4926/vpdc4.jpg

[Duniek]

bump :rolleyes:

today I make hand wheel for cpevs
http://img168.imageshack.us/img168/4971/cpevjg0.jpg

[LukeXE]

haha :D :D Will you use it ? :p

[Nordling]

bump :rolleyes:

today I make hand wheel for cpevs
http://img168.imageshack.us/img168/4971/cpevjg0.jpg
:slobber: :toast: Real cool!

[andre X_X]

where can we found that material???
your mounting kit is very cool :D

[Duniek]

where can we found that material???
your mounting kit is very cool :D

You should searching this material in Advertising agencies ;)

http://img185.imageshack.us/img185/5392/72611747un7.jpg

http://img185.imageshack.us/img185/6923/93593846pp1.jpg

http://img185.imageshack.us/img185/6905/94963824rk8.jpg

http://img149.imageshack.us/img149/7984/37723619ki5.jpg

http://img113.imageshack.us/img113/5421/underxa7.jpg

[Pete]

That last pic really stand out...

[runmc]

hmmm - this looks familiar :eek: :eek:

http://img113.imageshack.us/img113/5421/underxa7.jpg

Did you make that for me?? I will buy some from you :D

[LittleDevil]

Really nice products there ;)

regards

[Exahertz]

are these compatible with chilly1 evaps?

Duniek and I worked on a custom holddown for my Chilly1 evap and A8V mobo. if you know how to use CAD i think Duniek could make you just about anything you need. i could send you the drawing of the dimensions of the muff we reworked!

[n00b 0f l337]

Very nice products indeed!

[Brettbeck]

Those look really nice :D! Do you make your own evaporators too?

[Duniek]

thanks guys :)

Those look really nice :D! Do you make your own evaporators too?

yes, I will show my evaporators soon

[Duniek]

custom grills :P
http://img248.imageshack.us/img248/7645/nero1mn4.jpg
http://img248.imageshack.us/img248/2392/nero2sn2.jpg

[Brettbeck]

Cool :)! You could try using a UV reactive material for the fan guard, and using UV LEDs. Would that work? I think it would look cool.

[N3RO]

Yes..

I asked for a green uv plexy but he hasn't :(

Congratz for the job :D I'll probably receive them next week..

More later I'll need more things :P

[Exahertz]

i asked same question about UV :(

DUNIEK you should really try to order some UV materials, seems like it would loads of business :)

[Duniek]

i asked same question about UV :(

DUNIEK you should really try to order some UV materials, seems like it would loads of business :)

yeah, I can make grill with this fluorescent plexi (green or orange)
but I can making only bigger orders (about 10-15 grills)

btw, more mountings :D
http://img45.imageshack.us/img45/5201/morekt4.jpg

and more customs crystal grills
http://img252.imageshack.us/img252/9020/clxi5.jpg

[Exahertz]

very nice!

[LukeXE]

God, that guy lives 150km from me :P I must go to him "borrow" some mounting kits :p

Great...Maniakalny ;]

[LittleDevil]

Really nice mountings, can i ask you how long screws are those?

Regards

[Brettbeck]

Very nice :)! Have you got any pictures of the fluorescent ones?

[Duniek]

Very nice :)! Have you got any pictures of the fluorescent ones?

on first page of this thread :stick:
http://img214.imageshack.us/img214/166/extrahb1.jpg

EDIT(movie added to youtube)
short movie, making a backplates (http://youtube.com/watch?v=klSA1lXfvFU)

[BlueAqua]

Nice Video, I love watching CNC machine videos. The accuracy is amazing.

Nice hold down kits, great quality!

[Brettbeck]

on first page of this thread :stick:
http://img214.imageshack.us/img214/166/extrahb1.jpg



I was referring to some of the newer designs, but I suppose they would all look like those one the first page :D.

I downloaded that video but can't seem to get any video playback on various players :confused: .

[Duniek]

update:)
special muffs for chilly evaps
http://img408.imageshack.us/img408/2606/chilly1lr4.jpg

and finally, my evaps :D :D :D
http://img87.imageshack.us/img87/5048/evwq4.jpg

[Big SturL]

Can't wait to get mine :)

[Duniek]

new standard: 15mm holddowns :D
http://img116.imageshack.us/img116/1553/dn3es7.jpg

and more of hd's :slobber:
http://img116.imageshack.us/img116/6140/dn2vr4.jpg

http://img116.imageshack.us/img116/4199/dnoa3.jpg :banana:

[LittleDevil]

Really nice ;)

regards

[LukeXE]

a$$hole ! :D

Very nice ! I can be your "beta" tester ;]

[Brettbeck]

Are there enough there Duniek :eek: ? LOL :D.

[Duniek]

nothing special: new colour of muffs with 15mm hd ;)
http://img358.imageshack.us/img358/5975/ptr1ft1.jpg

[Duniek]

a "few" muffs :D
http://img510.imageshack.us/img510/8196/icepy2.jpg :D

[[XC] 2long4u]

Love the snowflake!

[Marvin]

love the muffs.
Can you say the dimensions of the the muffs :
inner and the outer hole ?
regards

[Duniek]

love the muffs.
Can you say the dimensions of the the muffs :
inner and the outer hole ?
regards
no problem ;)
http://img259.imageshack.us/img259/715/34sc0.jpg

[burton]

so umm what do you do for a living again?

[Duniek]

rev2.0
http://img522.imageshack.us/img522/9841/55pf3.jpg
http://img405.imageshack.us/img405/1592/rev21fk6.jpg
http://img519.imageshack.us/img519/5126/2avk7.jpg

[gosmeyer]

Nice job, looks clean!

[[XC] gomeler]

I like what I'm seeing :)

[one_servant]

Quality work man, keep it up.

[Cupcake]

WOW !!! You are my hero

That is some great work

[Stapler]

I like the red, very flashy Duniek, nice job.

[Duniek]

thanks for nice comments
http://img255.imageshack.us/img255/5562/111cb4.jpg

[N3RO]

Looks really great Duniek ;) And where's the mines? :D

Keep up ;)

[[XC] 2long4u]

Wheres the AMD one?

[hecktic]

hey Duniek some great work here.

question for you, are the new rev 2.0 or the latest that is included in the latest Chilly1 units... I would ask Chilly1 but he AWOL at the momment... specifically speaking this chilly1 unit here:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=58835&stc=1&d=1178844091
http://www.xtremesystems.org/forums/attachment.php?attachmentid=58838&stc=1&d=1178844162

thanks man and keep up the great work!

[Duniek]

hey Duniek some great work here.

question for you, are the new rev 2.0 or the latest that is included in the latest Chilly1 units... I would ask Chilly1 but he AWOL at the momment... specifically speaking this chilly1 unit here:
IMAGES
thanks man and keep up the great work!

this mounting is in Chilly1 units isn't mine

[Duniek]

some customs :D
http://img441.imageshack.us/img441/2991/drmk4.jpg
http://img175.imageshack.us/img175/5606/grile1pw9.jpg

[PPInDaHouse]

My grill is awesome :eek:

Thanks for the good job mate :up:

[N3RO]

Nice Duniek :D

I'm awaiting for all these stuff now :D

Thanks again ;)

[Duniek]

back to work :D

custom mounting for vapo LS
http://img71.imageshack.us/img71/7991/vapolsqz3.jpg

[tim-]

looking damn nice!

[LittleDevil]

Nice mountings Duniek ;)

regards

[Duniek]

thanks

btw
how tall is LGA 775 socket with CPU (with non polish IHS)
??

[The_Beast]

I really like you fan grills ;)

[Pete]

thanks

btw
how tall is LGA 775 socket with CPU (with non polish IHS)
??

Do you still need this measument? I can get you it tormrow. So CPU in socket, height of top of IHS to mobo?

[Duniek]

I have a project gpu evap and enclousure right now
but maybe I will change it a little
but I must have some dimensions

I will be glad if someone can help me

http://img227.imageshack.us/img227/3274/88guk9.jpg

"1" dimension from middle of mounting hole to white marker on pcb
"2" from middle of mounting hole to memory
"3" from gpu ihs frame to memory

[gosmeyer]

I will be glad if someone can help me

If no answers in 3 or 4 hours I'll pull my 8800GTX apart:up:

[Duniek]

I dont have idea, where should I post it

http://img261.imageshack.us/img261/337/laser1dc1.jpg
http://img252.imageshack.us/img252/723/laser2ag3.jpg

[Pete]

You make that back plate cover? Etched with an ATI logo? Looks like an X1900 card

[Duniek]

x1800xt but broken physsically and not working :(

gpu evaps :D
nice enclousure soon :yepp:
http://img516.imageshack.us/img516/4466/gpu2ou0.jpg
http://img179.imageshack.us/img179/769/gpu1rg8.jpg

[Duniek]

update
I wait for only screws and foam
http://img209.imageshack.us/img209/8131/card1wt1.jpg
http://img144.imageshack.us/img144/5183/gpu1ay8.jpg

I need dimension whcih I show on pic below link
in 8800gts/gtx/ultra and HD2900
http://img248.imageshack.us/img248/9318/g81wc7.jpg

thanks in advance
and wait for comments :D

[Pete]

Is there even enough space there to run them in crossfire?

[noobzed]

impressive !!

[Duniek]

Is there even enough space there to run them in crossfire?
I think yes, whole kit have ~37mm height (from bottom evap to top of plexi plate)

http://img155.imageshack.us/img155/832/sliqz8.jpg

[MaSell]

Very nice bro!

[Duniek]

http://img84.imageshack.us/img84/128/gpu2zu2.jpg
http://img84.imageshack.us/img84/4805/gpu1co9.jpg

[Moc]

:eek: amazing!

[Pete]

I just got an 8800GTX today Duniek, your making it hard for me to go with SS or water on it!

[Dimas]

where is my pack?:D:D:D:D
can't wait to have at least 2 on hands...

[Duniek]

http://img144.imageshack.us/img144/5434/gpu1hq6.jpg

GPU adapter for cpu mounting muff :D

[Duniek]

in action

http://img443.imageshack.us/img443/1594/37648151jj3.jpg
http://img443.imageshack.us/img443/4179/91116520zj6.jpg
http://img405.imageshack.us/img405/9735/40402948se0.jpg

[tim-]

looks nice as always :)

[hiwa]

really nice :up: :up:

[wawroch]

wow duniek good job :) what is the temperature of gpu?

[teyber]

beautiful!
if you don't mind me asking, and sorry if this has been asked 100000 times... But how is the evap held into the enclosure? Do you have to put the enclosure on before you braze the suction line? im a little confused sorry...

Reed

[tim-]

teyber:
it's the same solution as on LS, the foam is splitted in two pieces.

[edit]
pic of what I mean:
http://img71.imageshack.us/img71/7991/vapolsqz3.jpg

[Dimas]

got the evaps today....damn nice work;)
more updates on my worklog soon:D

[lolhalol]

got these from duniek today... nice stuffs man.. thx

http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/27-11-07_1553.jpg
http://i66.photobucket.com/albums/h252/lolhalol/cascade%20concept/27-11-07_1552.jpg

[Duniek]

mountings in diffrent places on world :D

and much more:
http://img152.imageshack.us/img152/5029/allva9.jpg

[Duniek]

http://img461.imageshack.us/img461/9895/new1bc9.jpg

stainless backplates and moutings plates :D

[ryba]

Awesome stainless stuff... because you have got it from me :D

[Moc]

Where is the problem? Typical ryba-comment :D everything is negative...

[Duniek]

Awesome stainless stuff... because you have got it from me :D

?? :confused:

postf***er
:ROTF:

better quality pics i will make on weekend I hope

[tim-]

nice to get stainless backplates thats a bit thinner then the 3mm dibond, especially for in case mountings.

cheers
Tim

[[XC] 2long4u]

thanks for nice comments
http://img255.imageshack.us/img255/5562/111cb4.jpg

Still waiting for the AMD one. Soon I won't want to see it I might just switch over.

[Duniek]

Still waiting for the AMD one. Soon I won't want to see it I might just switch over.

nobody is AMD fan in phase section I think :D
so anyone want order AMD grill, however project is done

http://img391.imageshack.us/img391/3272/aaars5.jpg

[[XC] 2long4u]

nobody is AMD fan in phase section I think :D
so anyone want order AMD grill, however project is done

http://img391.imageshack.us/img391/3272/aaars5.jpg

Ugh how can you say that when the 939 walked over anything Intel had before core2?:shakes: :shakes:

[teyber]

Ugh how can you say that when the 939 walked over anything Intel had before core2?:shakes: :shakes:

they had 939 in the stone age?

Jk man:up: . Beautiful duniek... :banana::banana::banana::banana::banana: man...

[Duniek]

rev2.5 evaps

http://img254.imageshack.us/img254/5261/evapslh6.jpg
http://img254.imageshack.us/img254/3127/evaps1cw6.jpg

//edit

I brazed evap a few whiles ago, and its damned easy to braze :D

[Marvin]

Duniek, what is the difference between rev 2.0 and 2.5 ?
regards,
Marvin

[Duniek]

only diffrent with 2.0 and 2.5 is in evap

evap 2.0 has enter capilary on top and suction center on bottom

evap2.5 has enter capilary on bottom center
so whole cap tube is in suction

[Duniek]

project
instead 4mm I drill 2,9mm hole
http://img441.imageshack.us/img441/8837/evap1dxw3.jpg

and 2,3mm chaneles and 1,7mm gaps

[jinu117]

project
instead 4mm I drill 2,9mm hole
http://img441.imageshack.us/img441/8837/evap1dxw3.jpg

and 2,3mm chaneles and 1,7mm gaps

Make the bottom about 1 mm thinner to make it do a little better :) And at the top, make it bit smaller on drill size and just nick it with suction tube OD size so you can push it in without having to worry about blocking suction return... :)
This one really brings me back old memories lol.

[Duniek]

Make the bottom about 1 mm thinner to make it do a little better :) And at the top, make it bit smaller on drill size and just nick it with suction tube OD size so you can push it in without having to worry about blocking suction return... :)
This one really brings me back old memories lol.

can do captain :D
in next revision will be done

http://omniserver.no-ip.org/duniek/enclousures/CPU/kit1.JPG
http://omniserver.no-ip.org/duniek/enclousures/CPU/kit2.JPG

[LittleDevil]

Really nice, but those sprngs are little too weak for SS mounting i think ;)

regards

[Pete]

Yay your putting some insuatlion around the otuside of the muff. I save 10c on the vapo LS doing it my self.

I might have to get one of these new ones off you dude

[Freddie123]

I would definately make the base thinner. 6mm is pretty thick. I would personally go to 4mm tbh

[Duniek]

this evap good hold quad :D
but I will make 4 and 5 mm base for test after new year

btw
http://img90.imageshack.us/img90/4241/ccsx8.jpg

:D:D:D

[Duniek]

http://img511.imageshack.us/img511/4467/rr1xy8.jpg

during making foam for rev2.0 enclousure

//
extras for rev2.0 enclousure
http://omniserver.no-ip.org/duniek/enclousures/CPU/vapo%20ls.JPG

[Pete]

Really impressive stuff Duniek. Can't wait to get my toys and get them built up

[Duniek]

custom ones
http://img217.imageshack.us/img217/244/tnimg0030ij2.jpg
http://img217.imageshack.us/img217/2704/tnimg0031ze8.jpg

[Duniek]

http://img141.imageshack.us/img141/8904/xese2od1.jpg

multi mounting for vapo XE/SE evap :D

[peterpiper]

http://img141.imageshack.us/img141/8904/xese2od1.jpg

multi mounting for vapo XE/SE evap :D

Cheers Duniek,
Arrived during the week. It's a pity the Vapochill performance doesn't do your work justice. Nice Job!:up:

Initial play, holds an E2160 @ 3.4, and that's about it!

[Duniek]

I made big gallery in first post :eek::eek::eek:

so enjoy with it :D

regards

[Mphs]

@ Duniek, nice works man!

[Duniek]

http://img501.imageshack.us/img501/3497/gpunewlm7.jpg

new gpu mounitng :slobber: :cool:

[Pete]

F******* about time these come in don't ya think? Was last year when we talked about them. Mind i know you had machinest issues. Looking good non the less

[kipow]

Nice work, please send me a PM with your prices for LGA 775 evap and monting kit.

[Duniek]

F******* about time these come in don't ya think? Was last year when we talked about them. Mind i know you had machinest issues. Looking good non the less

cpu kit in progress to :D

btw
laser cut backplate insulation :)
http://img150.imageshack.us/img150/4512/tnimg0039qt2.jpg

[Nosfer@tu]

cpu kit in progress to :D

btw
laser cut backplate insulation :)
http://img150.imageshack.us/img150/4512/tnimg0039qt2.jpg

Looks GOLDEN m8 :D

Setting a new standard :D

[LittleDevil]

Really nice, but i can tell you that that isulation is not enough thick and strong for backplate (motherboard isulation). Try to mount it and you will see in 1 week how thick it will be ;)

Kind Regards

[n00b 0f l337]

Not so much about thickness as an air tight seal at least for me. But yeah that would probably compress pretty heavily. You'd end up having to tighten down again.

[Duniek]

http://img262.imageshack.us/img262/3202/11yk4.jpg
:slobber: 130 backplates on stock :D

[n00b 0f l337]

PM me Duniek, maybe its time I deal with shipping cost to you ;)

[Duniek]

http://img258.imageshack.us/img258/6972/solidmountshv2.th.jpg (http://img258.imageshack.us/my.php?image=solidmountshv2.jpg)

alu solid mounts family :D

[Duniek]

also
Am I a mounting kit king ? :D :rofl:

http://img260.imageshack.us/img260/3862/12678861ok0.jpg

[Noob-ftw]

LOL Duniek, you're such a machine.

[Duniek]

LOL Duniek, you're such a machine.
:D

one month bumpage for thread and cheap bench table rev1.0
http://img294.imageshack.us/img294/518/tnbt1vx9kv8.jpg

[Duniek]

http://img108.imageshack.us/img108/269/85246144or4.jpg
done

[FatAlbert]

nice ;)

what material you used to build him ?

can you drop more photos ?

you forgot about the clr cmos button :D

[Duniek]

thread re-up
for vapo LS lga1366 and mach2 gt lga1366 KITS ----> cominig soon :D

also I have new avatar :p:

[Duniek]

MACH 2 LGA 1366 mounitng kit
http://img266.imageshack.us/img266/103/tnimg0239hl9.jpg

[sdumper]

MACH 2 LGA 1366 mounitng kit
http://img266.imageshack.us/img266/103/tnimg0239hl9.jpg

How do you take orders? Do you have an online store where you post your prices?

[Duniek]

VAPO LS LGA1366 ready
also it fit to 775/478/939/am2/am2+
http://img99.imageshack.us/img99/7239/pedro2sy0.jpg

[Buckeye]

Very Nice !
I can't wait :)

[teyber]

i like my blue backplates :)

[firerx]

I want one, Duniek! How do you deal with the metal backplate of the socket 1366 on the motherboards?

[sdumper]

I want one, Duniek! How do you deal with the metal backplate of the socket 1366 on the motherboards?

Look again at the picture because it look like he has made neoprene cutouts too.

[blind_ripper]

still nothing duniek just to let u know so u can send a other one . hate the post now 2 ;) .

[blind_ripper]

got evrything duniek ;)
http://i3.photobucket.com/albums/y90/blind_ripper/DSC00556.jpg
http://i3.photobucket.com/albums/y90/blind_ripper/DSC00561.jpg
http://i3.photobucket.com/albums/y90/blind_ripper/DSC00560.jpg
installed ;) ,works like a charm :).

[NCspecV81]

I so can not wait to get mine either =o) definitely looks top quality!

[FlyBoyGeo]

MACH 2 LGA 1366 mounitng kit
http://img266.imageshack.us/img266/103/tnimg0239hl9.jpg

Wow exactly what I am looking for. You have PM.

[Duniek]

nvm

[teyber]

still no mounts here -_-

[Duniek]

still no mounts here -_-

shipped 3.12.2008
delivered 13.12.2008

not so bad :cool:

[teyber]

shipped 3.12.2008
delivered 13.12.2008

not so bad :cool:

Got them later that night:up:

Thanks so much dude!
http://www.xtremesystems.org/forums/showpost.php?p=3498371&postcount=251

[firerx]

Duniek,
Any news on my shipment?

[Duniek]

http://img89.imageshack.us/img89/5748/a1ah7.jpg

MACH 2 KIT REV3.0
mouting for lga775/1366 and am2/am2+

[weirkved]

MACH 2 LGA 1366 mounitng kit
http://img266.imageshack.us/img266/103/tnimg0239hl9.jpg

hy man, i finally discovered you, lol

I bought you this kit by one friend but i think i had unluck and its impossible to mount.

Can you check this?

http://www.xtremesystems.org/forums/showthread.php?t=211715

Thanks

[Buckeye]

Thanks Duniek !!
Everything arrived safe and sound here :)

http://img360.imageshack.us/img360/5493/img0819yn7.jpg (http://imageshack.us)

http://img362.imageshack.us/img362/5357/img0820sp0.jpg (http://imageshack.us)

http://img509.imageshack.us/img509/5474/img0821ww3.jpg (http://imageshack.us)

[sdumper]

I ordered as well cant wait to see it up close.

Top Notch work :)

[teyber]

Thanks Duniek !!
Everything arrived safe and sound here :)

http://img360.imageshack.us/img360/5493/img0819yn7.jpg (http://imageshack.us)

http://img362.imageshack.us/img362/5357/img0820sp0.jpg (http://imageshack.us)

http://img509.imageshack.us/img509/5474/img0821ww3.jpg (http://imageshack.us)

hey duniek, the milled out recession in the hold down looks great. Im not sure the distance from the bottum of the hold down to the motherboard but this would make it shorter(may get in the way of some motherboards heatsinks), or you could save $$ and make it shorter lol and not have the recession.

just a thought

[Buckeye]

It fit my EVGA X58 perfect :)

[Duniek]

finally :D

@ teyber
your mountings is like mine rev1.0 mounts (for evaps with seger rings) and holddowns is on 20mm height of muff)
rev2.0 with foam inserts like ordered by buckeye, and in my vapo ls kits has ~43mm so I must make holddowns with milled area bcoz in other way screws will be too short to mount it

http://img364.imageshack.us/img364/945/123rv3.jpg

[teyber]

gotcha :) it looks very sexy that way though

[marleyman]

Hi! I have just built a new system based around an Asus Rampage II Extreme Socket LGA1366 and an Intel Core i7 Extreme 965. Currently I am cooling the CPU with my Coolit Elite thermoelectric cooler which I had planned to use for the dual HD4870 X2s. I have a Vapochill LS and had hoped that a kit would be released by now to adapt it to the new motherboards or that I would be able to build one myself. It looks like you do beautiful work however.

edit - read the phase sections rules on sales - there is no discussion of sales allowed on public forums. Do this in private and do not discuss before or after results. thanks

[firerx]

It fit my EVGA X58 perfect :)

I'll be glad when mine get here. I'm so glad that fits Buckeye, Since both of us have Jinu built units. Hey, what memory did you go with for the X58 mobo. I'm leaning towrads the Corsiar GT's when they come out. If they don't paint that fan head "red" I will. LOL:clap:

[Buckeye]

Yeah the Jinu Phase is holding strong with the 965XE :up:

Here is the RAM I got, I went the cheap route first. I think there might be better out there that others are using.

Patriot Viper Tri Channel 3GB PC12800 DDR3 Memory - 1600MHz

[Buckeye]

I'll be glad when mine get here. I'm so glad that fits Buckeye, Since both of us have Jinu built units. Hey, what memory did you go with for the X58 mobo. I'm leaning towrads the Corsiar GT's when they come out. If they don't paint that fan head "red" I will. LOL:clap:

Did Jin install a Chilly1 Evap on that unit ?

[NCspecV81]

I love this mount! High quality stuff! The price is right, and the wait is well worth what you get! Great job duniek! =o)



http://www.overclock.net/gallery/data/500/phasemounti7.jpg

[Jor3lBR]

Hey Duniek,

I was wondering i you have any mounts compatible with the Gigabyte Ep45-UD3P and the OCZ Cryo-Z Phase Change unit? I would like to replace the original one...

[Duniek]

I'll be glad when mine get here. I'm so glad that fits Buckeye, Since both of us have Jinu built units. Hey, what memory did you go with for the X58 mobo. I'm leaning towrads the Corsiar GT's when they come out. If they don't paint that fan head "red" I will. LOL:clap:

man, so at all you wanted mach 2 kit? or full new enclousure for jinu/chilly evap like buckeye has?
lmk on PM pls


Hey Duniek,

I was wondering i you have any mounts compatible with the Gigabyte Ep45-UD3P and the OCZ Cryo-Z Phase Change unit? I would like to replace the original one...

sure, possible to make that mounting (Can you post some pics or naked evap and mounting itself with dimension of it here or on PM?)
depend what do you want (only white holddown instead of crappy orignal plastic from CRYO-Z or full mounting like as my vapo ls kit)

lmk

[M3kk]

Hey Duniek, still dont got my mountings :(.

[Jor3lBR]

sure, possible to make that mounting (Can you post some pics or naked evap and mounting itself with dimension of it here or on PM?)
depend what do you want (only white holddown instead of crappy orignal plastic from CRYO-Z or full mounting like as my vapo ls kit)

lmk

Is the full mounting like this Buckeye received: http://img362.imageshack.us/img362/5357/img0820sp0.jpg

If so is it easy to assemble?

I will return to you with all the measurements.

Thanks.

[Buckeye]

Yeah mine has a Jinu Evap which is a bit different than a Chilly1, thats whay I asked. I ordered 2 extra Chilly1 enclosures, plus a Jinu one.

The Jinu Evap is ~1 inch tall
Chilly1's are ~1.125 inch tall

This is for the inside Muff insulation. Installing these are just like installing any other Evap enclosure, very simple :)

[Jor3lBR]

Yeah mine has a Jinu Evap which is a bit different than a Chilly1, thats whay I asked. I ordered 2 extra Chilly1 enclosures, plus a Jinu one.

The Jinu Evap is ~1 inch tall
Chilly1's are ~1.125 inch tall

This is for the inside Muff insulation. Installing these are just like installing any other Evap enclosure, very simple :)

That's interesting thanks for the info Buckeye, if the economy permit I will go with the complete kit.

The Cryo-Z overall performance is 100% depended on the way it's mounted. And with that crap cheap plastic bending all over the place and touching mosfet cooler etc is impossible to make it work with the UD3.

With my DFI the problem wasn't so obvious as the X48 had a big clearance to mount almost anything around the socket.

[Duniek]

Is the full mounting like this Buckeye received: http://img362.imageshack.us/img362/5357/img0820sp0.jpg

If so is it easy to assemble?

I will return to you with all the measurements.

Thanks.

let me know about measurments ;)
all my mouuntings is universal, for diffrent evaps I change only foam insert ;)

[Buckeye]

When I mounted my CRYO-Z on my EVGA 790i MB I had to cut off the extreme ends on the hold down for it to fit. The mounting supplies that came with it are pretty cheaply done, workable tho.

Dunieks kit fit very well and I didn't have to mod anything to make it work.

I used a full art eraser insulation with a layer of blue shop towels and 1 layer of foam.

Motherboard is prepped front side for a EVGA X58 SLI & 965XE.
I did use Dunieks back plate and foam on this. I found that when I was torking everything down nice and tight that the back plate was bending a lot so I losened it up a lot, didn't seem to make any differance. I would suggest a full metal back plate for furture builds.

My Jinu Phase is working very nice, topping out at about 4.8ghz for now. I need to fine tune this baby still. I would so love a nice cascade as these chips seem to like it really cold. No ice build up yet and everything is staying nice and dry so far.

http://img116.imageshack.us/img116/2416/img08332jq6.jpg (http://imageshack.us)

Back side has a metal plate there, so it was packed to keep any air out.

http://img520.imageshack.us/img520/4746/img08262io5.jpg (http://imageshack.us)

Front side finished up.

http://img247.imageshack.us/img247/7571/img08342kb1.jpg (http://imageshack.us)

All done a Phase mounted and ready for it's first test run.

http://img520.imageshack.us/img520/409/img08352rz7.jpg (http://imageshack.us)

[Jor3lBR]

@Buck

Neat $$$$! Thanks for the pics. Those things look soooo sturdy compared to the crappy Cryo-Z plates. I love the BIG and TALL solid bolts too.

May I ask what is that cloth material you used between the Neoprene and Eraser?

[Duniek]

May I ask what is that cloth material you used between the Neoprene and Eraser?

toilet paper I guess, lol

[Stuffie]

toilet paper I guess, lol

Looks like shop towel to me.

[Buckeye]

toilet paper I guess, lol

HAHA !


Looks like shop towel to me.

Correct !

[Jor3lBR]

let me know about measurments ;)
all my mouuntings is universal, for diffrent evaps I change only foam insert ;)

Here you go Duniek:

I made some cuts to the original mount so the measures are as is.

With all the cuts I still hit the NB and mosfet areas with the mount :down:

I need a new set that will make a solid mount and still be free of those components.

Tell me if you need more pics or more details to make my kit, please PM me with the price. Thanks!

I'm pretty sure the Cryo-Z is a Chilly1:

1. Hitting everything:
http://i43.tinypic.com/2qjm929.jpg

2. Evap 3,1cm
http://i44.tinypic.com/mhyo42.jpg

3. 9,5cm
http://i40.tinypic.com/fwhm3a.jpg

4. 11cm
http://i44.tinypic.com/mhdo3r.jpg

5. 6,4cm
http://i43.tinypic.com/9hruhs.jpg

6. 6,6cm
http://i40.tinypic.com/2r6kzt2.jpg

7. 4,1cm or 1 1/2inch diameter
http://i43.tinypic.com/2mxirn4.jpg

[jcool]

I just ordered Duniek's last lga1366 chilly1 mounting kit (the last he had in stock anyways) :wasntme:
Can't wait for it to arrive :D

[Duniek]

@Jor3lBR
give me diameter of evap and hole diameter in original plastic holddown please, after that I will know everything about it

(if its chilly1 evap it will be 38,1mm, but I want to be sure)

[Jor3lBR]

@Jor3lBR
give me diameter of evap and hole diameter in original plastic holddown please, after that I will know everything about it

(if its chilly1 evap it will be 38,1mm, but I want to be sure)

Yes the Evap has about 3,8cm or 38mm Diameter and Chilly1 told me in pm a while ago that he "designed the refrigeration unit from the Cryo-Z".

The diameter of the plastic holddown is shown on this pic from the other post see if that is what you need (between 65mm to 66mm):
http://i40.tinypic.com/2r6kzt2.jpg

[firerx]

Still haven't got mine , yet Dunk. I'll let ya know when I get it if it will wokr or not. I'mm pM you on MSN.

Jor31BR, Are we the only ones in Arizona, Phase changin' ?

[Jor3lBR]

Still haven't got mine , yet Dunk. I'll let ya know when I get it if it will wokr or not. I'mm pM you on MSN.

Jor31BR, Are we the only ones in Arizona, Phase changin' ?

Hey Firex! I don't see many folks from AZ around. Probably :up:

Ask Duniek for the Registration number on the letter (if he send it thru Registered Letter) you may be able to track it @ usps.com website once it arrives into US continent.

[Buckeye]

I found the tracking number he gave me for mine to rather useless, it was a good tracking number mind you, it just didn't get updated very often.

These things have to go through customs and all that jaz so it can be a bit slow.

Just hang in there, they will come :)

I believe Duniek is a man of his word and if he says he shipped it he did :up:

[Duniek]

I found the tracking number he gave me for mine to rather useless, it was a good tracking number mind you, it just didn't get updated very often.

These things have to go through customs and all that jaz so it can be a bit slow.

Just hang in there, they will come :)

I believe Duniek is a man of his word and if he says he shipped it he did :up:

sorry to firerx
possibility is that I might be send kit on wrong adress :confused:
Cant do anything now, I will back to home on sunday or monday and I will check that, and we will talk on MSN too

PM system now is better but I cant responding fast - 56kbps :(

[sjg0]

Hey Firex! I don't see many folks from AZ around. Probably :up:


Hey man i'm in AZ! cool to see its not just me :up:


sorry to firerx
possibility is that I might be send kit on wrong adress :confused:

If you sent it to the wrong address the customer would know because it says who it is delivered to when you track it.

You should move to the US! Its good for business I think to make shipping less hassle!

[firerx]

Oh -boy! That's not good! I'll PM in MSN Dunk! It's nice to see 3 folks here from AZ. We should have the xtremesystem branch of Arizona. Where the heat is xtreme ambietly.
LOL.

[firerx]

Still not here. Hmmmm??

[Jor3lBR]

Hi Duniek,

Sent payment thru Paypal Balance today (01.14.09).

Thanks!

[oxyyy]

nice work, i need one of this for my mach 2 gt :)

[Duniek]

pics of all actuall mountings (vapo, cryo-z, chilly1 evaps and mach 2 kit) will be update on tuesday-wednesday

[jcool]

Duniek, check ur PM ;)

[Duniek]

http://img258.imageshack.us/img258/816/tnimg0335ew3.jpg
:slobber:

backplates

[EvoCarlos]

just to say a big thanks to duniek
http://i90.photobucket.com/albums/k262/evocarlos/water%20cooled/evocade%20rev2/Image088.jpg

regards carl....

[Buckeye]

just to say a big thanks to duniek
http://i90.photobucket.com/albums/k262/evocarlos/water%20cooled/evocade%20rev2/Image088.jpg

regards carl....

It's nice equipment and works well :up:

I know Teyber will ask... oh an Evap... how thick is the base of that ?? :rofl:

[oxyyy]

http://img3.imagebanana.com/img/5kg9h2xk/thumb/CIMG1594.JPG (http://img3.imagebanana.com/view/5kg9h2xk/CIMG1594.JPG)http://img3.imagebanana.com/img/xgy79cj5/thumb/CIMG1607.JPG (http://img3.imagebanana.com/view/xgy79cj5/CIMG1607.JPG)

thx duniek! :up:

[teyber]

It's nice equipment and works well :up:

I know Teyber will ask... oh an Evap... how thick is the base of that ?? :rofl:

no...

because i already asked duniek :rofl:

[Duniek]

http://img104.imageshack.us/img104/741/tnimg0313gy0.jpg

laser power :eek: :slobber: :eek: :slobber:

[Ozzfest05]

effin hot I think Ron just made love to you for this

[runmc]

effin hot I think Ron just made love to you for this

LMAO :ROTF::ROTF::ROTF:

Thank you soo much Michal - I love them!!!

[Sgrios]

LMAO :ROTF::ROTF::ROTF:

Thank you soo much Michal - I love them!!!

I love it.. They look great. I really like the icicles on "Ice".

[firerx]

Man, those look sweet Dunk,
also you can see you handy work in my avatar pic. that's your kit in the system. Excellent fit too, Thanks again Duniek.

[Jor3lBR]

Got my Duniek Mount for Cryo-Z last week, thanks Duniek for the Fast Service!

Problem is I'm a big PhaseN00b and can't seam to know what to do with it :shrug::rofl:

How do I get this (mount) to fit that (cryoz) to work?

http://i566.photobucket.com/albums/ss102/Jor3llBR/DSC_0201.jpghttp://i566.photobucket.com/albums/ss102/Jor3llBR/DSC_0203.jpghttp://i566.photobucket.com/albums/ss102/Jor3llBR/DSC_0204.jpg

[teyber]

the evaporator is under that insulation. those two half peice foamy things "sandwhich" the evap and the lip machined in it fits over the evaporator. so take off enough of that insulation to show just the evap, then slide over the mount (the hold down plate and the muff) then put the two styrofoam type things over the evap, then slide down the mounting till you have a tight fit :) then post a picture of it so you som1 can see if all is in order :)

cheers

[Jor3lBR]

the evaporator is under that insulation. those two half peice foamy things "sandwhich" the evap and the lip machined in it fits over the evaporator. so take off enough of that insulation to show just the evap, then slide over the mount (the hold down plate and the muff) then put the two styrofoam type things over the evap, then slide down the mounting till you have a tight fit :) then post a picture of it so you som1 can see if all is in order :)

cheers

Thanks Teyber!

When you say "take of that insulation to show just the evap" you mean cut it off with scissors to show this: http://i44.tinypic.com/mhyo42.jpg

So the sandwich will be made on the base of the evap leaving most of the head exposed? On pic one you can see that the evap is not a tight fit on the plastic head so how should I insulate the tip there?

[EvoCarlos]

Thanks Teyber!

When you say "take of that insulation to show just the evap" you mean cut it off with scissors to show this: http://i44.tinypic.com/mhyo42.jpg

So the sandwich will be made on the base of the evap leaving most of the head exposed? On pic one you can see that the evap is not a tight fit on the plastic head so how should I insulate the tip there?
in image 2 you have the mount and muff the wrong way round the evap goes like in the image and the foam holds it in place
you need to slide the insolation back off the evap and suction line slide the evap thru the mount and muff then fit the foam over the evap then slide the evap w/foam in to the muff then it should look like below :)
it so easy you wil kick your slef after :)

http://i90.photobucket.com/albums/k262/evocarlos/water%20cooled/dunik%20evap/tn_IMG_0244.jpg

[Jor3lBR]

in image 2 you have the mount and muff the wrong way round the evap goes like in the image and the foam holds it in place
you need to slide the insolation back off the evap and suction line slide the evap thru the mount and muff then fit the foam over the evap then slide the evap w/foam in to the muff then it should look like below :)
it so easy you wil kick your slef after :)


Ohhh LoL I see I had it the wrong way :ROTF:

[Duniek]

Ohhh LoL I see I had it the wrong way :ROTF:

As I know mouunitng works good, pls post some pics Jor3lBR :D

[Jor3lBR]

As I know mouunitng works good, pls post some pics Jor3lBR :D

Hey Duniek I got the mount fitted now I'm finishing insulation to test it:


http://i42.tinypic.com/m7w31i.jpg

[Jor3lBR]

I finally got to mounting it again but I have a quick question:

There are no springs on the screw kit so how much should one tighten the thumb screws without braking the mobo in half and without leaving a tiny loose space between the evap and the cpu surface?

Thanks.

[Duniek]

you must "feel" pressure
not too much bcoz high pressure can damage foam around of evap

[Jack]

Hey Duniek, could you please respond to the PM I send you? :)

[Duniek]

Hey Duniek, could you please respond to the PM I send you? :)

sorry
database fails, and I lost some PM's

your packet was shipped some time ago, sorry for delay

[sdumper]

Duniek do you have the tracking for mine too? Can you send me a PM?

[Duniek]

vapo LS, NB adapter (61-75mm)
http://img179.imageshack.us/img179/3010/vaponb.jpg

[Exempt]

this evap good hold quad :D
but I will make 4 and 5 mm base for test after new year



:D:D:D

Do you happen to still have socket 775 mounting kits for either mach II gt, or Vapochill LS? I have been trying to find them, thanks in advance!

[Duniek]

Do you happen to still have socket 775 mounting kits for either mach II gt, or Vapochill LS? I have been trying to find them, thanks in advance!

yes, always on stock (fits to 775/1366 and am2/am3)
just lmk on PM