The new memory fan...

[serious1]

I was wondering when it is going to be released and at what price point? Also is it compatible with any type of ram? Taken from this (http://xbitlabs.com/news/memory/display/20061116233004.html) article.

[billdavis]

that is cool ill get 1 too
________
CHRYSLER VALIANT (http://www.dodge-wiki.com/wiki/Chrysler_Valiant)

[serious1]

sort of a bump:). i just want a timeline from an ocz rep;).

[RyderOCZ]

Hello,

I will have to ask the office......I don't get the info for inital release or price.

[lawrywild]

I just ordered one, should have it on tuesday or wednesday

[serious1]

How, Where? Do tell more:slobber: .

[lawrywild]

http://www.microdirect.co.uk/ProductInfo.aspx?ProductID=15865&GroupID=0

Don't know where to get them in US though or wherever you are.

[Rudyn]

Well, if you live in Australia you can get both the OCZ and Corsair Dominator RAM cooler from here

http://www.nintek.com.au/x/scripts/prodView.asp?idproduct=8547

http://www.nintek.com.au/x/scripts/prodView.asp?idproduct=8549

I'm getting one for myself :banana:

[serious1]

Wow, it seems that it might be priced at the $20 mark which is what I was hoping for:).

[lawrywild]

probably less since UK is a ripoff and it's $20 equivalent here

but it was £17 at ocuk..

[ken]

probably less since UK is a ripoff and it's $20 equivalent here

but it was £17 at ocuk..

its around a tenner at MicroDirect, OcUK is ripoff :p

[GrimReaper]

Hey any store in the US who has this? :toast:

[serious1]

Yeah, I hope it reaches the US soon. Hint Hint;). I wish the OCZ rep here could fill us in since it seems to have been launched already, at least in the UK.

[lawrywild]

its around a tenner at MicroDirect, OcUK is ripoff :p

I know, that's why I posted:

http://www.xtremesystems.org/forums/showpost.php?p=1872973&postcount=7

;)


Should have it tomorrow hopefully but I ordered the cheapest postage..

I was saying about ocuk @ £17 because he suggested $20 in US

[ken]

I know, that's why I posted:

http://www.xtremesystems.org/forums/showpost.php?p=1872973&postcount=7

;)
..........

dunno how I missed that, sorry :slapass:

[lawrywild]

Says out of stock now, and my order is "awaiting despatch"

Hopefully there wasn't a screw up with the stock system :|

[Pyr0]

i bought one (arrived today from microdirect), but can't use it at the moment :(
i have a 7900gt with a couple of small (zalman) heatsinks on the rear of the card which get in the way when fitting the memory cooler

[J-Mag]

Hmm that's a nice looking accessory. Matches the Lian Li cases...

Edit: They are in the US...

http://www.atacom.com/program/atacom.cgi?KEYWORDS=MEMA_OCZT_MC_09&USER_ID=www&SEARCH=SEARCH_ALL
http://www.lagoom.com/OCZ_XTC_Memory_Airflow_Cooler_-/OCZTXTCC/partinfo-id-569081.html

[phelan1777]

I shoudl ask my gf relatives in the UK to pick up a few and I can sell them here in a few weeks :-P.

[citat3962]

Looks like on Atacom it's on back order until tomorrow..

I decided to do a preorder. The Corsair cooler sits way too high for me to use. I'm switching to watercooling and low CFM fans for a little peace and quiet. This should be great for giving me peace of mind when pumping 2.2v to my DDR2

[lawrywild]

i bought one (arrived today from microdirect), but can't use it at the moment :(
i have a 7900gt with a couple of small (zalman) heatsinks on the rear of the card which get in the way when fitting the memory cooler

Seen,

can't you replace one of the thumbscrews with a normal screw. That's what I was planning on doing if mine hit my 7900GTO

PS: Mine has been despatched for delivery tomorrow :)

[ken]

i bought one (arrived today from microdirect), but can't use it at the moment :(
i have a 7900gt with a couple of small (zalman) heatsinks on the rear of the card which get in the way when fitting the memory cooler

can you just power it up and see if its noisy or not? :p

[lawrywild]

60mm quiet fans won't cost much anyway, I bought this more for the actual housing than the fans themselves

[Pyr0]

can you just power it up and see if its noisy or not? :p
i wouldn't say it was noisy, but i can definitely hear it

it comes with two normal screws as well as the thumbscrews, but it's the actual housing that's hitting the little heatsinks i have stuck on the back of the gfx card (and it's *very* close to the gfx card itself)...
if only it were about 5mm taller :rolleyes:

[phelan1777]

think it would work well on a DFI Expert?

[lawrywild]

Got mine, took some pics, going to install now

Will post my pics up in aircooling section later

[lawrywild]

http://www.xtremesystems.org/forums/showthread.php?t=125782 :thumbsup:

[serious1]

OK, I still can't find a place to buy this in North America:(.

[RyderOCZ]

OK, I still can't find a place to buy this in North America

http://www.atacom.com/program/print_html_new.cgi?&USER_ID=www&cart_id=5112304_69_221_248_254&Item_code=MEMA_OCZT_MC_09

http://www.lagoom.com/OCZ_XTC_Memory_Airflow_Cooler_-/OCZTXTCC/partinfo-id-569081.html#

http://search.ncix.com/displayproductdetail.php?sku=21674&vpn=OCZTXTCC&manufacture=OCZ%20TECHNOLOGY

http://www.cancomputer.com/index.php?additem=1&sku=5666

http://www.bigfootcomputers.com/Merchant2/merchant.mv?Screen=PROD&Product_Code=10177

[serious1]

^^ Thanks, any idea when newegg or zipzoomfly will start to carry it?

[ghostface]

Anyone fitted this fan on a p5b deluxe?

Got this fan 2day.Fitting the clip over the top dimm socket piece of cake.Bottom clip retention seems to be knowhere near the dimm socket,and i cant get it attached(btm of the clip is half way up the dimm skt attachment)

anyone else got this problem?

[adidassler]

would this thing fit in my dfi expert?
im using thermaltake beetle as my cpu cooler
thanks

http://i20.photobucket.com/albums/b208/adidassler/LanpartyXfx.jpg
http://i20.photobucket.com/albums/b208/adidassler/2gskill.jpg
http://i20.photobucket.com/albums/b208/adidassler/Beetlexpert5.jpg

[iadstudio]

Anyone fitted this fan on a p5b deluxe?

Got this fan 2day.Fitting the clip over the top dimm socket piece of cake.Bottom clip retention seems to be knowhere near the dimm socket,and i cant get it attached(btm of the clip is half way up the dimm skt attachment)

anyone else got this problem?

Got it on my P5W DH no problem. Put some acoustic foam in the mounting grooves that go around the RAM clips to help it snug a bit better. Also used the flat mounting screw for the bottom mount by my VGA. Needs to be on a controller though because the fans are a little louder than I care for. No luck finding quieter 60mm x 10mm LED fans.

GREAT PRODUCT either way. Wish it was quieter though.

[KingThot]

Can anyone measure the temp delta between the active mem cooler and without?