View Full Version : Will my setup with MCW50-T stand a chance?
NyCUndaGrounD
05-02-2003, 01:51 PM
Ok guys im really contemplating about if i will kill my radeon 9800 or not. I have this setup.
Swiftech MCW50-T
The new Swiftech pump MPC500
3/8" hose
TTGI 520-ss PSU
COnnect3d radeon 9800 pro
Black ICE Micro 80mm with 1 80mm on it
and Dangerden reservoir
what will happen if i actually run this setup. Will the pelt get hot because i dont have a big enough radiator. Or will i be fine?
Major
05-03-2003, 06:25 AM
If your going to be running your cpu and gpu/tec on the same loop through the Black ICE Micro I would say that your going to have problems. I don't see it being able to dissapate that much heat. If your going to just run the cpu or the gpu/tec though it you would be fine. A second fan on it in push pull would help a little.
NyCUndaGrounD
05-03-2003, 10:18 AM
Thanks major im only goin to run that setup on the gpu because i have prommy to cool cpu.
Gamer67
05-04-2003, 12:48 AM
Swiftech MCW50-T
The new Swiftech pump MPC500
3/8" hose
TTGI 520-ss PSU
COnnect3d radeon 9800 pro
Black ICE Micro 80mm with 1 80mm on it
and Dangerden reservoir
Only thing I would change is the rad, I would go with the Black Ice pro (well I already have it)
I have the same w/b tec (mcw 50-t)
Using a Maxi jet pump/res combo (MaxiJet 1000 l/h (265gph) powerhead submersible pump/Aluminium Powder Coated Resevoir )
Some tygon tubing (1/2")
And a black ice pro w/120mm sunon strapped to it...
I would also stick to 1/2" tubing...
NyCUndaGrounD
05-04-2003, 06:22 PM
So do u think my temps will vary from the temps u have.
Tedinde
05-10-2003, 05:03 PM
Screw the "Premade store bought", Hit your auto parts store for a 79 ford pick up w/air heatercore. 6"X 6" four core!!!! $20.
Works fine with a 226 watt tec on my CPU and 120 watt tec on my 9700 pro.