View Full Version : Help with my motherboard
kingdomwinds
11-11-2006, 10:36 AM
i have a biostar Tforce 6100 s939. In the advanced chipset section, i see sb and nb htt width options. North is at 16,16 and south is 8,8. Should i leave them like this or do they have to be changed? I plan to run my 165 at 290x9
also, besides installing the dual core drivers, do i have to do anything else when switching out my opty 148 for my 165? Is a reformat needed?
Cooper
11-11-2006, 11:43 AM
Should i leave them like this or do they have to be changed?
Leave as is
do i have to do anything else
No
Is a reformat needed?
No
happy upgrading :)
kingdomwinds
11-11-2006, 12:42 PM
Thanks for the tips. I have a huge problem now.
I cannot post at 290x9. My cpu can do 2.8ghz so i know that my cpu is not the culprit. Im using these settings except that my cpu multi is 9x. http://hardforum.com/showpost.php?p=1028591036&postcount=113
My ram can do DDR500 so that is not the problem either. This mobo can do high htt according to many who own this board but i cannot. Is my mobo a dud? Can mobos even be duds?
Cooper
11-11-2006, 01:04 PM
Try to change NB->SB and SB<-NB to 3x
your mobo/CPU also might not like this RAM divider at such high HT speed
kingdomwinds
11-11-2006, 01:55 PM
i tried that but still does not want to post. Im going to try update the bios
kingdomwinds
11-11-2006, 02:34 PM
updated to the latest bios but still no go at 290x9. Im seeing at what point my mobo cannot post. So far im at 265x9. I will see if i can do 270
My mobo craps out at 265 htt with 166 divider. Im really dissapointed. It cant do 270 and higher. I don't get it. Tforce is suppose to be an overclocking motherboard and mine can only do 270. I seen ppl do 330+ with this mobo.