E6400 Super Pi Thread

[CaNNibaL]

Hey Guys :) !
Check Out My E6400 Super Pi 1 MB on air (ThermalTake TR2 xD)

http://img218.imageshack.us/img218/2551/untitledyl8.jpg (http://imageshack.us)


Valid Link - http://valid.x86-secret.com/show_oc?id=135430


Comments Needed :D

[menlatin]

you need to run that ram a little faster. I'm sure can do alot more than that.

Whats cpu/ram voltage? ram timings?

take the IHS off and do some of this :D
http://i89.photobucket.com/albums/k235/menlatin/13scpuz.jpg
^ on water.

[CaNNibaL]

menlatin Lovely SuperPi :rolleyes:

This is one of the first ones... i did that time CPU @ 1,625 v ;\ And Mem @ 4-4-4-10 2,1 default voltage and system is ThermalTake TR2 Cooled :f

The max i can do is 8x440 and ram @ 1xxx @ 2,30/2,35 +- 4-4-4-10

What ya think ?

[menlatin]

try some bring that tras 10 down to about 4 or 5.
What week and stepping is it.

[CaNNibaL]

Don't Know... buy it 04/Aug/2006

which one you think ? :f 25 ?!

I'll try

[menlatin]

you stil have the box? the number looks like L628A134. L6 + 2 numbers + 1 letter + 3 numbers.

[CaNNibaL]

Yeah i know what it looks like but i have no BOX ! When i change Cooler or something i'll know : >

Can I put this cellshock @ 4-4-4-4 @ 2,1 /2,15 v ?

[menlatin]

You proably can. Check the xtreme bandwidth section and see the results they've been getting with cellshock ram.

[Bebel]

Air cooling (Zalman 9500) :

http://img140.imageshack.us/img140/9361/3800spijx1.jpg

WR with an Allendale (not sure) : (single stage)

http://img110.imageshack.us/img110/2197/sanstitre4hn1.jpg

[CaNNibaL]

Amazing :X
My result must be pathetic to you :$

But it's on air with tt tr2 xD

[JMKS]

I will NOT post my result until I'll achieve 13.xxx :). That's my goal for now. It will be very difficult (I think that max frequency which my CPU can handle is 4108MHz, so the rest must be optimizations), but I think it's possible ;).
Of course very good results menlatin and Bebel :).

Edit: it looks like 513FSB is max of my mobo, not CPU (with x6 multiplier it won't pass 1M @ 514 FSB). Maybe chipset needs better cooling, I'm not sure.

[CaNNibaL]

Go On JMKS good luck :D

[Cordovader]

Here´s mine :)

http://img521.imageshack.us/img521/5247/519x81mpt6.th.jpg (http://img521.imageshack.us/my.php?image=519x81mpt6.jpg)

Stock Vapo LS. I have to mod the board (P5B Dlx) to go further :p:

[CaNNibaL]

You make me fill embarrassed... Compare your scores with mine :X
Continue Posting :) Very nice Pi Times Though... ;)

[ManagHead]

Bebel: Nice! I haven't tried my phase on my chip yet, but it has managed 4032MHz pi on water - I think I'm mb limited atm though. Is the first score all you got on air? A nice boost then!

[ownage]

http://img233.imageshack.us/img233/394/3600mhzpwnagept1.th.jpg (http://img233.imageshack.us/my.php?image=3600mhzpwnagept1.jpg)
15,828 sPI 1m, i think its a nice score for 3600mhz.

[CaNNibaL]

Yap i think it's very nice comparing with mine :)

[offtopic] could you upload your wallpaper to rapidshare and share the link plz ?! xD

Thankz

[ownage]

[offtopic] could you upload your wallpaper to rapidshare and share the link plz ?! xD

http://www.widescreenbabes.com/picture/Elisha+Cuthbert/Elisha+Cuthbert+036 :p:

[CaNNibaL]

Ty ownage

Wonderful woman indd !

I would like to benchmark her :D

[dinos22]

see sig for my E6400 benches

lovely CPUs

just wish i can get my hands on one of these LxxxBxxx CPUS for some 4GHz+ demolishing :D

[CaNNibaL]

Nice cpu nice results ... Well Done dinos22

[CaNNibaL]

Wee

http://img413.imageshack.us/img413/5520/superpi1mb3520sz6.jpg (http://imageshack.us)

16,593 s

:D

[menlatin]

what are you're subtimings. I think you can get that time down a bit more.

start @ 4-4-4-4-5-35 and come down 30, 25 and see if you can do 20. I gained quite a bit from playing with subtimings. plus, i dont think you should be afraid to give the ram 2.2v or 2.3v as long as you have a fan over them.

[CaNNibaL]

Lol menlatin i don't have fan over them :\
But... Subtimes are

4-4-4-4-30-3-10-5-10


I made 32 MB

http://img416.imageshack.us/img416/2396/superpi32mb3520hj5.jpg (http://imageshack.us)

What u think ?!

[JMKS]

I don't know what to think about this 32M, because I've ran 32M (from start to end) only ONCE (it takes sooo long) :).
A little hint: don't run Windows in Safe Mode, this option is slower than normal boot (with killed processes etc).

Well, OK, we can post results in 32M and 16M too (atleast I can, because I have these ;) ).

16M
http://img507.imageshack.us/img507/678/spi16gg5.jpg

32M
http://img232.imageshack.us/img232/8328/spi32io4.jpg

BTW, air cooling :D

[CaNNibaL]

Just done 1 @ 8x445


Valid Link - http://valid.x86-secret.com/show_oc?id=135754

http://img119.imageshack.us/img119/1871/superpi1mbzq9.jpg (http://imageshack.us)

[menlatin]

Lol menlatin i don't have fan over them :\
But... Subtimes are

4-4-4-4-30-3-10-5-10


I made 32 MB

http://img416.imageshack.us/img416/2396/superpi32mb3520hj5.jpg (http://imageshack.us)

What u think ?!

What were your previous 32m times? try this one @ 1m for comparison. I think i may need to try some subtimings like that. brb

[The Legend]

you need to run that ram a little faster. I'm sure can do alot more than that.

Whats cpu/ram voltage? ram timings?

take the IHS off and do some of this :D

^ on water.

Intel IHS are soldered on. One runs the risk of easily ruining a chip compared to removing it on an AMD.

I highly recommend against this. A nice lap job will suffice.

[DaWaN]

My one :)
http://nap.fol.nl/15266.JPG
Crappy week 24 on air

Anyway clicked the wrong tab at CPU-Z :( My mem is PC3200 OEM with corsair 5400 SPD :D
Running 1:1 here at 4-3-2-9

[CaNNibaL]

It looks nice for a 24 week cpu !

DaWaN i think mine is 24 or something like that... i bought it in the first days they arrived in lisbon (begining of august) it's not and ES !

How much vcore did u use to boot @ 3,8 ?! What were your temps ?!

Hugs xD

[JMKS]

Does anyone know if the scores @ HWbot are World Records in SuperPI for E6400?
I think that the Bebel's 13.33 is the WR for 1M, but I'm not sure if the SuAsDu's score is highest in 32M.
What do you think?

[kucor00]

hallo everyone, this is the best i can do with my corsair value select@2,1V, but vdimm mod on p5b will probably make things better:)

http://www.imagesforme.com/thumbs/2215hjghj.jpg (http://www.imagesforme.com/viewer.php?id=2215hjghj.jpg)

[menlatin]

Intel IHS are soldered on. One runs the risk of easily ruining a chip compared to removing it on an AMD.

I highly recommend against this. A nice lap job will suffice.

Please refer to this thread.
http://xtremesystems.org/forums/showthread.php?t=116246

Thats the highest dual prime stable e6400 on water, and the highest e6400 pi on water. If i'm lying, please show me.

And also, remember what forum you're on. :)

JMKS : Nice 32m. Your ram beats me... that sounds bad.... :D

[The_Hardstylez]

My E6400,

http://img489.imageshack.us/img489/7452/38523zm8.th.gif (http://img489.imageshack.us/my.php?image=38523zm8.gif)

A slower score with a more higer freq then DaWaN. But my rams runs at higer timings and my windows install is crappy.:cool:

Week 24, 1.6v.

[DaWaN]

It looks nice for a 24 week cpu !

DaWaN i think mine is 24 or something like that... i bought it in the first days they arrived in lisbon (begining of august) it's not and ES !

How much vcore did u use to boot @ 3,8 ?! What were your temps ?!

Hugs xD

It was at 1,725Vcore, and I didn't want to watch the temps :D More than 1,725V was bad, max speed went down.

[JMKS]

No sub-14s today, bad...
Fresh XP and it looks that I must tweak it (I don't know exactly how, I've already done the obvious things only, max frequency still @ 4106MHz and I think it's a mobo max, not CPU), today best result 14,031s (not enough stable to save screenshot).
Tommorow should be ~5°C lower, so I will try again ;).

[TiTON]

Does anyone know if the scores @ HWbot are World Records in SuperPI for E6400?
I think that the Bebel's 13.33 is the WR for 1M, but I'm not sure if the SuAsDu's score is highest in 32M.
What do you think?

Hey JMKS,

As for the WR for 1M and 32M.. I do believe Bebl has the best 1M, and I have the best 32M. Unless someone else has beaten it :) You know WR only last for a day or two at the best around this forum :P

SAD

[Moonman]

http://img227.imageshack.us/img227/3039/spi14829rj8bb8.th.jpg (http://img227.imageshack.us/my.php?image=spi14829rj8bb8.jpg)

CPU is week 27, memory is budget Super Talent 2x512mb 333@476 4-4-4-12

regards

[dsaraolu]

15.687 - E6400@3600 MHz, stock cooler, 2x1024 Xtreem Team 450 4-4-4-11, Abit AB9 Pro.

[JMKS]

OK, finally sub-14 :D :banana:

http://img482.imageshack.us/img482/8131/spi1vo3.jpg

No more 1M for me (for some time of course), I'm deleting partition with Windows on which I did that, I need some rest ;).
I know that menlatin has 0,001s lower but I have no motivation this time :toast: .
Milestone finally achieved and I'm satisfied with it :).
Next maybe I will do some 16M or 32M, I don't know now.

Aircooling (but hmm... xtreme) :D, maybe I will post some pictures soon :).

[menlatin]

OK, finally sub-14 :D :banana:

http://img482.imageshack.us/img482/8131/spi1vo3.jpg

No more 1M for me (for some time of course), I'm deleting partition with Windows on which I did that, I need some rest ;).
I know that menlatin has 0,001s lower but I have no motivation this time :toast: .
Milestone finally achieved and I'm satisfied with it :).
Next maybe I will do some 16M or 32M, I don't know now.

Aircooling (but hmm... xtreme) :D, maybe I will post some pictures soon :).

WOOO!!!! Good job man! now push for past 13.922 !!! I know you can beat me!!!! Now do it! Its all in the ram!

[JMKS]

Thx :).
Upgraded Your result lately (this 13.922)?
You have, in fact: better CPU (not 100% sure because mobo is veeery unstable even with 513x6 so the CPU maybe can go higher), better mobo, better cooling and I have maybe a little better RAM (I really don't know why it was 4-4-4-4 and not 4-4-3-4 as usual, the reason is that the day before I flashed BIOS a couple of times to test how fast every BIOS is (well, 0507 couldn't boot @ 510 FSB, 0614 was nothing special too, back to 0804) and not very carefully re-set the RAM settings) and some tweaks (definitely not the best possible but it was enough for me this time) so You should have better result and it is not annoying me in any case :toast:.
It was 4+ hours testing some strange settings in Windows and it was worth it but I don't want to spend more time on it (and I don't know what else to change in Windows).
Maybe when temperature will drop sub-zero and it will give me 516 FSB (don't know if possible) stable (1M stable of course) I will bench 1M again but for now I'm done :).

Edit: OK, I'll try some more, but I can't say that I'm sure that I'll improve this time. Maybe some better tweaks in Windows and 4-4-3-4. Furthermore, I'm not sure if I can re-bench @ 514,6 FSB (veeeery unstable). Tweaks in Windows @ 2,4GHz (my 24/7; if someone with E6400 want to compare just Windows optimization, my settings are 300 FSB, 2,4GHz, RAM 900 5-5-5-15 (subtimings 5-35-10-10-10-10 I think) and my best time so far is 23,859s; before mentioned already "4+ h tweaking" it was 23,922s) and then I'll decide if it is worth "real" benching :). But remember, I'm not promising anything. It's a little boring in fact (again, again, again and differences in milliseconds only) ;). Maybe 1-2 hours (some new settings to test), and when results won't get better I will stop, I'm not determined this time ;).
I really want to increase number of digits to 16/32M and give it a try :).

[TiTON]

Hey folks,

I wanted to update my Spi 1mb time. Still need to tweak the ram a bit. Haven't had time to tweak the ram to find the tightest timing yet. I believe i was only running ram at 4-4-4-10.

I finally got my phase back, so I now have time to tweak :D

Spi 1MB WR as of 11/15 is 13.297.

I'm am going to try HARD to break into the 13.1s.

http://www.ironmods.com/IronImages/HWBOT/spi1mb13297_750.jpg

SAD

[JMKS]

New WR :clap: :)
What's Your subtimings? Maybe there is something to tweak ;). I have the best subtimings @ 2-20-0-9-4-9, don't know what it would be @ ~550 FSB...
What else, hmm... some registry tweaks and MaxMem of course, not very big difference but I believe some difference is (especially the registry tweaks can give You a big gain but I don't know anything about it ;) ).

[TiTON]

New WR :clap: :)
What's Your subtimings? Maybe there is something to tweak ;). I have the best subtimings @ 2-20-0-9-4-9, don't know what it would be @ ~550 FSB...
What else, hmm... some registry tweaks and MaxMem of course, not very big difference but I believe some difference is (especially the registry tweaks can give You a big gain but I don't know anything about it ;) ).

as of right now.. the main timing and subtiming is nothing special. Pretty much stockc.. I bleive 10-10-10-10.

I'm going to do a fresh OS load in the next few days and apply some tweaks.. and see how things goes :)

Hopefully 13.1 or 13.0 :) We will just have to wait and see. I haven't really played with the 965 subtiming much at all. So its going to be fun :D

SAD

[dinos22]

Nice cpu nice results ... Well Done dinos22
thanks CaNNibaL :D

[CaNNibaL]

Nice :)

I think i can go no further cause it won't boot @ > 450 mhz fsb :( and it needs over 1,6 v real... too much for a thermaltake TR2 cooler

[TaPaKaH]

mine E6400 on chilled Latvian air :D
http://images.people.overclockers.ru/100272.png
Setup (if some1 interested):
E6400 L630A (thanx to kiwi :toast:)
ASUS P5B vanilla (with some mods on ;))
2x512Mb Corsair 8000UL (D9DQT) (I wish I wouldn`t set 3.15V to them :brick:)
Vcore = 1.63V under load
Vmem = I don`t remember. Should be around 2.5-2.7V

[JMKS]

mine E6400 on chilled Latvian air :D

Thanks for posting, it is some motivation for me :). Another 0,05s to beat, not sure if possible, because I tried reeeally hard to achieve sub-14s, but who knows, I will try ;).
Now in Poland is pretty "hot" (for benching), ~10°C at night, so this is not that easy as it was before (my sub-14 was @ ~5°C lower and I'm reaching some kind of CPU (or mobo, not sure, but probably CPU @ this temp) wall). But of course the temperature is dropping, so in near future I will do my best ;).
And 2,5V for RAM is not-reachable on unmodded P5B-Dlx (only ~2,3-2,35V if set to 2,45V in BIOS...), maybe I should try to mod it but I'm a n00b in moding ;).
Great result, anyway :).

[kayl]

32m SPI 13min 48sec 62ms - E6400@4195mhz 1:1 Micron 4-4-4-11 PC-5300

1M SPI 14.172sec – E6400 @ 4281.4Mhz

4.3GHz Managed it once but got 4mins dual prime before it crashed.

http://img66.imageshack.us/img66/1338/419513m48secnv1.th.jpg (http://img66.imageshack.us/my.php?image=419513m48secnv1.jpg)

http://img363.imageshack.us/img363/9545/e64004281414172sec14seccp9.th.jpg (http://img363.imageshack.us/my.php?image=e64004281414172sec14seccp9.jpg)

http://img166.imageshack.us/img166/8373/4300prime4minssc0.th.jpg (http://img166.imageshack.us/my.php?image=4300prime4minssc0.jpg)

[ANP !!!]

How r the 27A week CPUs. I have one, n will be benching soonnn :).

[Valmont]

Hi,
@ANP, English is not my native language either and I'm new here. For my first post, here is mine :

http://img153.imageshack.us/img153/7679/36fv2.th.jpg (http://img153.imageshack.us/my.php?image=36fv2.jpg)

[The_Hardstylez]

My new superpi score :)



http://img155.imageshack.us/img155/8316/15172uu4.th.jpg (http://img155.imageshack.us/my.php?image=15172uu4.jpg)

Have someone tips to get sub 15sec ? I saw a lot of guys with only 3800mhz getting sub 15..

I have tryed to boot in diagnotisch mode and have adjust maxmem from 100-800 but no different. :stick:

[.devastatioN]

All stock voltages exept for ram which needed 1.9v
If I go anything higher it gives errors on orthos...
http://img227.imageshack.us/img227/225/3ghzan5.jpg
Week 27 CPU:stick:

I might try some more but I have bad IHS. Im using AF7PRO and temps on cores are 50C stressed at dual prime @3ghz... I've seen much better temps

I've already tried some more but I want to stay close to stock as much as possible. 3.2ghz didnt want to boot OS, no clue why.

[Sav]

my 6400
Zalman 7700 cu + P5B Deluxe :)

http://www.hostingfiles.net/files/20061213034439_480x8_4-4-4-12.jpg

[ANP !!!]

Nice clocks n Results guys.. :toast:

[serialk11r]

My gay motherboard (asus p5n32sli se deluxe) stopped at 300mhz fsb... nothing will get it higher:( I got 24 seconds 1M!!! WOO HOO! Just an hour ago, my board decided to break down further, and I'm stuck with stock speeds...

[aasmaukr]

My E6400 is bad. L628A. I ran 1M at 3704 with 1.5v vcore in BIOS (P5B Deluxe) with Mini Typhoon air cooler and lapped IHS. I didn't really gain anything with the IHS lapping and higher vcore doesn't help OCing. I tried with 6x multi and my board stops at 500MHz FSB.

[mrlobber]

Have someone tips to get sub 15sec ? I saw a lot of guys with only 3800mhz getting sub 15..


You don't even need 3800 Mhz to get sub 15s SuperPi 1M ;) 3735 Mhz on E6400 is enough :D

Platform:


E6400 630A448 @ 1.59V
Thermaltake Sonic Tower
Asus P5B Deluxe Wifi-AP unmodded
2x1 Gb Corsair 6400C3 @ 2.45 Vdimm
8800GTX :D
PCP&C 850W


I'm by no means the ultimate Pi tweaker, but:

http://mrlobber.svnets.lv/Oc/conroe/pi1m.JPG

The key here is to stay on 1066 strap ( = boot @ 400fsb and clockgen up - this offsets at least 100 mhz of raw cpu speed). And the other Pi tweaks, like closing explorer, and so on.

My cpu can do 1M at least to 3850 Mhz on air, and mem is capable almost on DDR2-1200 4-4-4-8, so it is clear the board is crapping out in my case here... so more Vmch (remember, here the board is unmodded) would probably bring me some more Pi goodness for sure :)

[ManagHead]

My E6400 is bad. L628A. I ran 1M at 3704 with 1.5v vcore in BIOS (P5B Deluxe) with Mini Typhoon air cooler and lapped IHS. I didn't really gain anything with the IHS lapping and higher vcore doesn't help OCing. I tried with 6x multi and my board stops at 500MHz FSB.
You sure it wonh't go any higher? What's your temp?

[aasmaukr]

Yup.. I'm pretty sure that's where it stops. I tried a couple different BIOSes and played a bit with voltages and mem timings. Btw, my mem does 525MHz 1M with 4-4-4-10 timings and 2,45v (in BIOS) so that's not what's stopping me.

I'll test with another P5B-Dlx and I'll also see how it likes better cooling (SS).

[The_Hardstylez]

Thanks for the tip mrlobber :) I got my new board today ( p5b dlx).

I'am gonna try it.

[ANP !!!]

http://img297.imageshack.us/img297/5862/12302006184853lj3.th.jpg (http://img297.imageshack.us/my.php?image=12302006184853lj3.jpg)

here are mine..

tomorrow will try to play with the timings, btw can some1 tell me, why soo high time for the speed. I mean i m pretty sure i should be getting much lower time for a 3.95g :(.

can some1 give me some tips.. :D

[sub_zer0]

has anybody had much luck oc the e6400 L630A?

mine seems to be maxing out at 3.2ghz with 1.525v. the fsb doesnt want to go over 400.

[Norz]

Sub 15 with a E6300 is possible:) .....
...if you got a desent mobo and ram,no mods only watercooled
L627A B2

http://i94.photobucket.com/albums/l98/nassuz/nassuz-bench/spi1m14.jpg

[Bootup05]

I get 16 seconds over here at 3.62/3/4/5GHz

[krompirusa]

4.1ghz super pi.Supertalent ddr2 800@1026 5-5-5-18,P5B-DELUXE,scythe infinity,.....I need some micron d9, to go higher:banana: .Windows xp pro sp2, with no tweaks.
http://shrani.si/files/p1200032rgue.jpg

http://shrani.si/files/p1200035rgul.jpg

[funkflix]

My old E6400, just had the CPU a few days and at that time i didn't know that "better" timings are slower on P5B.. :)

http://img85.imageshack.us/img85/3536/14969lk0.jpg

Primestable 3600MHz 1,43V.

[Drager2]

And here is my:
http://images.people.overclockers.ru/107441.jpg
14.515sec
E6400 L630A406 B2 @ 4043MHz 1.7v under chiller +13 | Full unmoded Asus P5B Dlx :) | Geil PC8500 Plus @ 1011MHz 4-4-4-12 2.45v
So is it good? I think that I should have highes score...

[JMKS]

You need some tweaks (both hardware and software), guys ;).
I have sub-14s @ 4117MHz, with everything I know (and I'm not an ultimate Pi tweaker, believe me ;)) tweaked properly, so 4+GHz and ~14,5s is not the best reachable ;), keep tweaking and trying :).
http://img482.imageshack.us/img482/8131/spi1vo3.jpg - this is on the previous page of this topic also.

[krompirusa]

JMKS look at mi timings its 5-5-5-18.When i get ram to go 4-4-4-8@1000+ im going to score sub 14s;).

[tiborrr]

Krompirusa, tighter timings don't add up (that) much on C2D. ;)

[dinos22]

JMKS look at mi timings its 5-5-5-18.When i get ram to go 4-4-4-8@1000+ im going to score sub 14s;).
tiborrr is right....there's no chance you will be able to shave THAT much off the times with 4-4-4-x....even if you had a 975x board and 3-3-3-x i don't think you'd be able to do sub-14 relative to your current times..........it is possible as the polish guy showed but you need to work on tweaking more too + get a 2GB kit of RAM...that will help in times too

[Drager2]

JMKS As for my result: IMHO you aren`t right... You have +1Gb Ram /+75MHz CPU /15MHz Ram freq = I think it could made 0.5sec.

[[XC] gomeler]

I need to take a screenshot when I do SPi runs, I was just doing them for stability testing and broke into 13.8x with 4200MHz. System isn't stable after 4200MHz which is weird, I can bench 3D at 4200 and I can do 32M at 4200 but 4208 causes a crash, I think that might be the limit of my chip and/or memory. I wish I knew more tweaks for SPi, wish one of the masters would tell us everything :p:

[vicfalc09]

How is this super PI score????

This is a E6400 air cooled with a Zalman 9700 with G.Skill 2 x 1GB F2-6400CL4D-2GBPK http://www.newegg.com/Product/Product.asp?Item=N82E16820231087
----Just for an idea of what memory i am using.

The CPU is a L626 B


http://img155.imageshack.us/img155/4540/superpi1m3yp.png (http://imageshack.us)

[krompirusa]

I realize that tiborrr and dinos22.But as i wrote i have Windows xp pro sp2, with no TWEEKS and didnt format my comp a very long time.The sistem is totaly full of junk:slapass: .But im planing to learn some tweeks;) ,buy beather ram sticks( to go higher that ST ddr2 800 5-5-5-15@1026 5-5-5-18-@2.45v(at 5-5-5-15 or 16 sistem wont booth)).I hope for at last 4.3ghz spi1m on air:toast: .

edit:my English is not perfect :)

[Quentin]

http://daftou59.free.fr/Screen/Buffalo_1Gb_PC6400_Cas5/Cas4/1M_528_2.2v.png

2819*19.438 = 54795 :D

4-4-4-12 in real ;)

Biostar Tforce P965 Bug with the ratio 2:3 and Cas 4 :)

[Norz]

L629A@3984mhz 1M-14.078sec

http://i94.photobucket.com/albums/l98/nassuz/E6400/spi1m14.jpg

...Moore to come....

[JMKS]

2819*19.438 = 54795 :D
Do it with FSB 500+, 1066 strap and 2:3 4-4-4-12 - that would be something really interesting :P ;).
BTW, I'm getting Commando tomorrow - some new benches on the way :D.

[overcrash86]

Xeon 3050 accepted ?

skirms single stage, 1.7v, -45°C evapo...

http://maxicrash.free.fr/Xeon%203050%207635B093/PI%204596Mhz%2012.718s.jpg

[Quentin]

Do it with FSB 500+, 1066 strap and 2:3 4-4-4-12 - that would be something really interesting :P ;).
BTW, I'm getting Commando tomorrow - some new benches on the way :D.

(500/2) * 3 = 750Mhz :eek:



http://daftou59.free.fr/Screen/Intel_C2D_E6400_L629B905/E6400_Spi1M_4061Mhz.png

14.062*4061 : 57105

I think that i can do 56xxx, it was for test the max superpi 1M with my fsb bugged E6400 :slapass:

[JMKS]

Some benches on Commando: (13.890*4016=55782, if it matters ;))

http://img404.imageshack.us/img404/4892/1mog8.jpg

http://img294.imageshack.us/img294/3379/16mqp8.jpg

http://img295.imageshack.us/img295/304/32mry4.jpg

[Hutch]

Here's an old one from my P5W DH (haven't used the board since september)

http://www.geocities.com/hutch1ns/16.jpg

E6400 B2 (forget the rest sry it's been awhile) @ 3554mhz 1.425v
Terrible Elpida IC 4x512mb PQI Turbo PC5400 4-4-4-12 @ 444mhz 5-5-4-5
P5W DH

Haven't got new ram yet, got an S3 and completely limited by the ram.

[The_Hardstylez]

Kick :D

My latest 1M score
http://ferry.lghosting.nl/bestanden/superpijpg.JPG

Anyone tweaks/tips how to get sub < 15 sec ?

[Drager2]

Mine update:
http://hwbot.org/signature.img?iid=29186&thumb=false
13.234sec
E6400 L630A406 B2 @ 4390MHz 1.76v under stock VapoLS
Asus Commando 0803, vdroop mod
Geil 2*512 PC8500 Plus (D9GCT) @ 1098MHz 4-4-4-8 2.55v. Don`t remember subtimmings but it was as OPB suggested (perfomance\freq)
Still have some ability to update my score cause of using more os and memory tweaks...

[The_Hardstylez]

@Drager : Nice score :clap:

My new personal record :

http://img192.imagevenue.com/aAfkjfp01fo1i-27494/loc379/35094_superxs_122_379lo.JPG

14.547sec
E6400@ 3853Mhz 1.62V Air cooled
4 x 512MB PC6400 @ 482Mhz 4-4-3-6 PL=7
Gigabyte P35-DS3P