Newegg and mwave opteron 165 steppings?

[Bazikstano]

Hi, I would like to know how are the last mwave and newegg opteron 165 steppings being?! (specially mwave)

Thx
Bz.

[Cooper]

Recent Optys from Egg

CCB1E 0609FPMW
CCBBE 0615EPMW

[Bazikstano]

Those are good stepping =D, at leaste 2.7ghz =D
Thx!!

What about mwave?

Shall I spend 10-20bucks more on a CCBBE 0617FMPW on eBay or just get one on those stores?

PS: whats the lower oc of a 165?

[Ivan Os]

Mwawe:

http://www.dfi-street.com/forum/showpost.php?p=637769&postcount=2

[csimon]

My 165 is waiting at home. I can give you the current Egg steppings once I get there. Might not do much good though since this last lot ran out already.

[perkam]

My hats off to all those who stuck with 939 until dc 939 prices dropped...amid conroe and am2...its a test of sheer patience :bows:

Plus i prolly deserve a :slapass: for going nuts over am2...but prices there aren't bad either :) Win,Win.

Perkam

[Bazikstano]

@Ivan Os : nice reference =D

@csimon : It would be very greathfull

@perkam : Thx =D

[buttmud]

my opty 165 off of newegg is ccbbe0161xp?? (forgot the last two digits)

right now its at 2.8 stable 1.35v running prime for 24 hours. hoping for 3 ghz on air.

[csimon]

Ok I'm home. The stepping is in the box window and it's *drumroll* CCBBE 0615EPMW! That's the same stepping my bud from another site got from NewEgg on the lot before mine so it's been consistant.

Good luck!

[en4cer]

I just Recieved my 165 from newegg yesterday, CCBBE 0617 FPMW

[osiris999]

i havent really seen any 165s not hit 2.7 and higher in a long time

[Hey_Its_Cole]

I just Recieved my 165 from newegg yesterday, CCBBE 0617 FPMW


How is it clocking???

[buttmud]

3 ghz primed on my 0616 for 12 hours and counting

[LoN3R]

Ordered a 165 opty today from the egg. Itll be overnighted on monday . have some team group pc 4000 1 gig tccd kit coming aswell.

[Hey_Its_Cole]

Well I ordered one, my 4400 has never done over 2.5 "I got a dud". I figure if it clocks better I will sale the 4400 for a $100 or so.

[en4cer]

How is it clocking???


So far I've hit up to 3GHz @ 1.5v... but temps get really high much after :(

Also waiting for a new set of 2GB Ballistix to come in from newegg before I get it fully tweaked

[buttmud]

http://www.turbosupply.net/dustin/superpi.JPG

24 hours prime stable + 26 minute superpi 32m off of an 0616 from newegg. like stated above, i have to run 1.5vcore and the temps run a bit high, but they're liveable...

just gotta tweak the ram now

[Hey_Its_Cole]

http://www.turbosupply.net/dustin/superpi.JPG

24 hours prime stable + 26 minute superpi 32m off of an 0616 from newegg. like stated above, i have to run 1.5vcore and the temps run a bit high, but they're liveable...

just gotta tweak the ram now


Sweet, I hope I get a good one, I never seem to have good luck :confused:.

I am on water so...I doubt temps will be an issue.

[buttmud]

my temps were starting to be an issue, so i knocked it back down to 2.8 GHz. for some reason you can go all the way to 2.8-2.9 on 1.4v, but when you wnat to hit that 3 ghz mark it takes quite a bit more and just pushes up the heat too much on air.

[Hey_Its_Cole]

my temps were starting to be an issue, so i knocked it back down to 2.8 GHz. for some reason you can go all the way to 2.8-2.9 on 1.4v, but when you wnat to hit that 3 ghz mark it takes quite a bit more and just pushes up the heat too much on air.


Thats kind of howw my 4400 except mine takes about 1.5 volts to go above 2.4 and 1.6 will do 2.7, just not worth the risk of damaging the cpu.

[osiris999]

mine stays running at 1.6 volts

[Bazikstano]

Hohoh, so in newegg or ebay..xD Think get from ebay, a CCBBE 0617 FMPW new for 159.99

[LoN3R]

NewEgg , Ordered Sunday 4, 2006

CCBBE 0617 FPMW

300x9 @ 1.375bios , she gets warm on Stock cooler. , Team group ram is on its way.

Biostar T force 939.

[Bazikstano]

Todoy I rodered...waiting a CCBBE 0617 FPMW or something like that....It will arrive in 10days, because I live in Chile xD.

CCBBE 0617 FPMW is one of the latest steppigns?

[Sparky]

I have a CCBBE 0617FPMW and am at 2.52GHz @ 1.325V BIOS, 1.36V actual according to software. I'm stuck at 280HTT right now though, not a CPU limitation I don't believe because voltage adjustments don't help any. Also I've seen the exact same stepping hit 2.8+ GHz. Something to do with mobo or RAM settings most likely.

Anyone have any ideas I have a thread linked in my sig :)

Bz your results with that DFI and RAM will be better than mine I can just about guarantee it. My Asus is capable of 300+ HTT from what others have done but my RAM is pretty bad at overclocking.... Or I'm just really bad at RAM adjustments since I know almost nothing about timings and such :shrug: