kevin2701
10-02-2006, 07:39 PM
Currently running Gigabyte GA-M57SLI-S4 motherboard with G.skill F2-6400PHU2-2GBHZ kit, AMD Athlon 64 x2 4600+. Problem is bios is showing timings of 5-5-5-15 instead of correct timings of 4-4-4-12. Read other posts regarding intel based systems however in there version of the motherboard intelegent tweaker program they have options i dont to change these values.
I on the other hand I have to change them using advanced chipset features in the bios but there are alot of other settings that could be changed if i make manual changes there such as the following:
Cas# Latency
1T/2T Command timing
TWTR Command delay
Write recovery time
Precharge time
Row cycle time
Ras to Cas R/W delay
Ras to Ras Delay
Row precharge time
minimum Ras active time
My question is can i just change the 4 timing settings to 4-4-4-12 and just leave the other things alone without causing any problems since as soon as i hit the enter key for manual settings of DRAM it makes all these settings manual and not auto.
I on the other hand I have to change them using advanced chipset features in the bios but there are alot of other settings that could be changed if i make manual changes there such as the following:
Cas# Latency
1T/2T Command timing
TWTR Command delay
Write recovery time
Precharge time
Row cycle time
Ras to Cas R/W delay
Ras to Ras Delay
Row precharge time
minimum Ras active time
My question is can i just change the 4 timing settings to 4-4-4-12 and just leave the other things alone without causing any problems since as soon as i hit the enter key for manual settings of DRAM it makes all these settings manual and not auto.