PDA

View Full Version : New cruncher online(finally!)



Movieman
10-02-2006, 02:38 AM
That dual socket MSI K8N Master2-FAR that came to me from Smurfy is finally up and running on WCG. He was right, one cpu is dead but one Opty dual core at 2211mgz should help some.
All thats in it for now is 2-256mb PC2100's but that should change this week.
I ran into a guy that I sold xeons to a couple years ago and he made me a HUGE deal on 6-512mb ECC REG DDR400's and I couldn't say no.:D
Another guy with some connections :rolleyes: is trying to get me another 266 so this one won't be lonesome.

oh, when it came time to give a name to the machine, I thought of one that is fitting:
Smurfy's Revenge:D
Thanks pal, wish you were still with us.:toast:

[XC] mysticmerlin
10-02-2006, 02:45 AM
about time :stick: :clap:

Movieman
10-02-2006, 02:46 AM
about time :stick: :clap:
:cord::cord::cord: :frag::shoot::D

[XC] Teroedni
10-02-2006, 02:48 AM
Ohh my....:slobber:

That is some real power right there

Movieman
10-02-2006, 03:52 AM
Well, It was running. Went in to the bios, made a few small changes and POOF..no boot..Change it all back to the defaults, and now it gets to Verifying DMI pool data in the post and then it gives me a mac address and then it goes looking for DHCP?
Who the hell designed these bios's? SadistsRUS?:(
Excuse me while I get out the big hammer and go talk to this thing!

Jose
10-02-2006, 04:04 AM
Well, It was running. Went in to the bios, made a few small changes and POOF..no boot..Change it all back to the defaults, and now it gets to Verifying DMI pool data in the post and then it gives me a mac address and then it goes looking for DHCP?
Who the hell designed these bios's? SadistsRUS?:(
Excuse me while I get out the big hammer and go talk to this thing!

Boinc Synergy? That way they are trying to sabotage you :)

RSmura
10-02-2006, 04:04 AM
got her back from the dead yet?

-Acid-
10-02-2006, 06:44 AM
serious power there Movieman,

I,m really gonna need to pull finger out to get even close to that sort of highway speed

Movieman
10-02-2006, 06:47 AM
got her back from the dead yet?
Yes, had to do a recovery in windows. This board is flaky as all hell.
Breathe in it's direction and it gets antsy.

serious power there Movieman,

I,m really gonna need to pull finger out to get even close to that sort of highway speed
Got this running on WCG now:
DX3600/2mb/800
DX2400/512/533
2-DX2000/512/400
Opty 266 @2211
Hopefully one more today

-Acid-
10-02-2006, 07:19 AM
P4 c 3ghz, 2gb ram HT
P4 b 3.2ghz 512mb ram
Dothan 710 2.67ghz 2gb ram
A64 2.5ghz 1gh ram
P3 1.2 my laptop :)
few more to come yet!!!

RSmura
10-02-2006, 07:50 AM
I need more power Scotty!

I'm givin' her all she's got Captain.

sheesh. I feel the tracks rumbling. Is that DDTUNG I see coming under a full head of steam? This is really gonna hurt!

Anyone want to join MY team to keep DDTUNG at bay?

Movieman
10-02-2006, 01:31 PM
My ram came today. 6 sticks of ECC REG DDR400. Never had a machine with 3 gig of ram before, 2 yes but not 3!:D
Machine is very flaky, have 2 splats in device manager:
on PCI Memory controller and on SM BUSS controller
Shut it down and you need to do a windows repair using recovery console.
I admit to being a AMD n00b but this thing is a very funky system.
Emailed MSI to see if they have any answers cause I sure don't!
It's crunching and benched using BOINC 5.4.11 at 2114/3989
Now to go and see if thats better than my DX3600:p:

Martijn
10-02-2006, 01:33 PM
My ram came today. 6 sticks of ECC REG DDR400. Never had a machine with 3 gig of ram before, 2 yes but not 3!:D
Machine is very flaky, have 2 splats in device manager:
on PCI Memory controller and on SM BUSS controller
Shut it down and you need to do a windows repair using recovery console.
I admit to being a AMD n00b but this thing is a very funky system.
Emailed MSI to see if they have any answers cause I sure don't!
It's crunching and benched using BOINC 5.4.11 at 2114/3989
Now to go and see if thats better than my DX3600:p:
Yes, it is. Now put up some pics :D

[XC] leviathan18
10-02-2006, 01:43 PM
i saw pics :p: it hink the problem is the board remember amd doesnt have chipset.... thats why they bought ati

njkid32
10-02-2006, 01:47 PM
:welcome: to the world of AMD.... You have been spoiled with your non blue screen non ondie mem controller systems:rofl: Just install those chipset drivers and this should help most of your probs. If not then I bet you cant throw that mobo like a frisby all the way to Arizona.... I dare you... I dare you....:rofl:

Movieman
10-02-2006, 01:49 PM
:welcome: to the world of AMD.... You have been spoiled with your non blue screen non ondie mem controller systems:rofl: Just install those chipset drivers and this should help most of your probs. If not then I bet you cant throw that mobo like a frisby all the way to Arizona.... I dare you... I dare you....:rofl:
Wanna bet? I used to be able to toss a football 55 yards, I can make this thing sing all the way to AZ...Piece by piece!:p:

[XC] leviathan18
10-02-2006, 01:52 PM
dave sorry to burst your bubble that was maybe 40 years ago you cant do that now xD

DAK1640
10-02-2006, 02:07 PM
MM, every little bit helps...Good job on getting that rig limping. Are in interested in a TRS-80 ? Only the old timers will understand that H/W:banana:

Movieman
10-02-2006, 02:19 PM
Splats are gone. New benches: 2112/3948...a little lower than before, but at least the damned thing can be booted now without doing a recovery!

dave sorry to burst your bubble that was maybe 40 years ago you cant do that now xD
No, It was not 40 years ago so get your facts correct!
It was 1968...38 years ago!

MM, every little bit helps...Good job on getting that rig limping. Are in interested in a TRS-80 ? Only the old timers will understand that H/W:banana:
nah, actually have one with the optional 20mb card(pre hard drive)

-Acid-
10-02-2006, 02:20 PM
This should help some memories then Dak1640

http://i60.photobucket.com/albums/h20/Ac1d-/320px-TRS-80_Color_Computer_1.jpg


Splats are gone. New benches: 2112/3948...a little lower than before, but at least the damned thing can be booted now without doing a recovery


Were are the Photos Movieman ?

Movieman
10-02-2006, 02:25 PM
Got to neaten up the wires first or I'd never hear the end of it from you guys!:p:

brot
10-03-2006, 04:24 AM
:)

It seems that your mainboard is scared. Dont say to it what it will have to do.

Smurfy
10-16-2006, 06:46 AM
well blimey, i may be here a little late but great thats its all up and running.

I actually found the board to be fairly reliable and a great overclocker, the fact youc an overclock in the BIOS was great, not sure why your having trouble, it may well be multiple sticks of ram, i cant say iv ever had much success with AMD and more than two sticks of dual sided ram.

Thanks for the name, bout time i get some revenge for something even if i dont know for what :P.

Once again i apoligise for turning up here late, i dont read these forums much currently.