View Full Version : When In Doubt....
bullet2urbrain
09-20-2006, 05:32 PM
Overclock.
C2D e6600 @ 3ghz was getting @ most 6.6MCeM's
then i decided i was tired of getting slaughtered, so i decided that overclocking was my friend
e6600 @ 3.4 now getting 7.7MCeM's
it'll probably level off around 6.9 when all is said and done.. but wewt for OC'ing
toobad it takes 1.5 Vcore to reach 3.6ghz
[cTx]Philosophy
09-20-2006, 05:37 PM
Ouch I do 3220 @ 1.36
What week is ur 6600?
I wish i had a decent enough board to let me go higher :(
Im 1:1 460 which is mobos fsb wall..
bullet2urbrain
10-10-2006, 02:02 PM
after a while of running @ those clocks it has tailed off, now i am just over 6.0 CeM's
however i restarted the svc. and now im up again @ 7.4
PFOUR
10-11-2006, 12:51 AM
Mine tails off too.
I find a restart about once a week keeps it on top.
is that 7.4 Cems per service?
I'm getting around 5.5 to 6 per service on my 6300 @3200 mhz
[XC] riptide
10-11-2006, 12:57 AM
Hmmm... tailing off is very strange indeed. Never experienced it, although it does happen when I'm running other stuff on it... Guys... Just an idea... is your rate changing anything to to with finishing one block and starting another? Cos you do know that different k/n pairs give different rates.
PFOUR
10-11-2006, 02:49 AM
Yea, don't think it's that though.
If you just shut down and restart, carrying on with the same numbers you instantly get a better output.
I better start reading my OC for Dummies Book. Diablo may need some OCing
bullet2urbrain
10-11-2006, 06:08 AM
yup here is hte look at it after some overnight running.
still going strong.
PFOUR
10-11-2006, 07:35 AM
Are you running 2 services or 1?
I Imagine that's 2, Still a fair increase over what I get at 3200 though.
bullet2urbrain
10-11-2006, 07:45 AM
Are you running 2 services or 1?
I Imagine that's 2, Still a fair increase over what I get at 3200 though.
Just one, the other core is running a secret special surprise for some people :D
KaptainBlaZzed
10-11-2006, 10:01 AM
toobad it takes 1.5 Vcore to reach 3.6ghz
pump that voltage up, i have 1.525 going through my E6400 with a big typhoon.
I was thinking of upping it to 1.575 or 1.6. These cpu's can handle quite a bit of heat, but most people are scared and still using the 90nm AMD standards regarding temps.
i currently load at 60C with the BT and use to load at 65C with the stock cooler.
i have not heard of a single person burning up their C2D yet do to overheat. My next stop will be 70C at full load.:slobber:
OC that bad boy to the MAX:eek:
Martijn
10-11-2006, 10:07 AM
pump that voltage up, i have 1.525 going through my E6400 with a big typhoon.
I was thinking of upping it to 1.575 or 1.6. These cpu's can handle quite a bit of heat, but most people are scared and still using the 90nm AMD standards regarding temps.
i currently load at 60C with the BT and use to load at 65C with the stock cooler.
i have not heard of a single person burning up their C2D yet do to overheat. My next stop will be 70C at full load.:slobber:
OC that bad boy to the MAX:eek:
Intels can take up to 80C without too much trouble (talking from experience). Never blew any CPU due to overheating yet... I have even seen one at 120 for a split second when the cooler wasn't mounted correctly, and the poor P3 is still working fine :)
Helheim
10-11-2006, 10:29 AM
I blew one of my overclocked Xeons on the weekend. A 2.4Ghz running at 3.8Ghz with 1.6v. The other one in their still works fine so not sure what the problem was it’s been running fine like that for over a year… pisses me off!! Not going to be easy to find another one that will do 3.8Ghz again.
[XC] DragonOrta
10-11-2006, 10:44 AM
Coretemp is showing 69c & 70c running WCG and DPAD. This is with 1.6625v on watercooling. Haven't had any noticable heat-related problems. Once I add the x1900XT I'm getting from AFI to the loop, I think the temp might go up a bit, since it's all on a PA160.
bullet2urbrain
10-11-2006, 11:23 AM
but most people are scared and still using the 90nm AMD standards regarding temps.
Im one of those people, i still regard 50* C as the absolute max i want my CPU.
and its close right now @ 49* C Fully loaded.
Perhaps if im feeling frisky :P i'll up it and see what i can get to...
65nm vs. 90nm still worries me.
Who will like to teach an olde phart like me how to OC Diablo?
bullet2urbrain
10-11-2006, 01:28 PM
Jose,
Someone has a very profound quote in their sig around these parts and me thinks its Ozzimark.
In overclocking he who tries the most things wins.
Basically keep temps low ( and with LV_DD's WC'ing) and keep clocks high.
im more than happy to help but i dont really konw how to describe starting from scratch.
Movieman
10-11-2006, 01:34 PM
Overclock.
C2D e6600 @ 3ghz was getting @ most 6.6MCeM's
then i decided i was tired of getting slaughtered, so i decided that overclocking was my friend
e6600 @ 3.4 now getting 7.7MCeM's
it'll probably level off around 6.9 when all is said and done.. but wewt for OC'ing
toobad it takes 1.5 Vcore to reach 3.6ghz
My DX3600 maxxed at 8.3mil...Weedsqueezer had a 6600 at 3600-3700 and was showing 12 mil..scary!:eek:
Jose,
Someone has a very profound quote in their sig around these parts and me thinks its Ozzimark.
In overclocking he who tries the most things wins.
Basically keep temps low ( and with LV_DD's WC'ing) and keep clocks high.
im more than happy to help but i dont really konw how to describe starting from scratch.
Arg!!! I know what need to be done, it is the HOW ... Hoiw does one plays with the clocks?
I feel so obsolete.
KaptainBlaZzed
10-11-2006, 02:43 PM
Arg!!! I know what need to be done, it is the HOW ... Hoiw does one plays with the clocks?
I feel so obsolete.
read this for starters.
http://www.hardforum.com/showpost.php?p=1027479689&postcount=2
bullet2urbrain
10-11-2006, 03:58 PM
My DX3600 maxxed at 8.3mil...Weedsqueezer had a 6600 at 3600-3700 and was showing 12 mil..scary!:eek:
Dave: Actually showing 12million? or a combined 12million?
sheesh, if i cant get each core to 12million it may just be worth it to dump my "side" project for some SoB Stomping.
Movieman
10-11-2006, 04:00 PM
Dave: Actually showing 12million? or a combined 12million?
sheesh, if i cant get each core to 12million it may just be worth it to dump my "side" project for some SoB Stomping.
combined..
bullet2urbrain
10-11-2006, 04:01 PM
combined..
Phew... cuz right now combined I'd be sitting at just over 14, approaching 15 with a restart.
You had my young heart beating pretty darn fast Dave.
Movieman
10-11-2006, 04:03 PM
Phew... cuz right now combined I'd be sitting at just over 14, approaching 15 with a restart.
You had my young heart beating pretty darn fast Dave.
told ya those darn ho's are monsters!..NJKID saw a combined of 18+ mil on Clark
bullet2urbrain
10-11-2006, 04:06 PM
hmm ima need some better cooling for that....
Dave: YHPM ;)
[XC] riptide
10-11-2006, 04:29 PM
Bullet.. nice CEMS there... ;) Also you have advantage of it been low n number and low k number. That helps also by up to 18-20%. ;)
I read the stuff I was asked to read. Paint me confused.
Man this being old and obslolete and worst being dumb...sukx the big wazooo.
I am a hopeless noob.
Arghhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
bullet2urbrain
10-12-2006, 08:49 AM
I read the stuff I was asked to read. Paint me confused.
Man this being old and obslolete and worst being dumb...sukx the big wazooo.
I am a hopeless noob.
Arghhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
Hey hey there buck-o :D
Start small Jose, go for a very realistic goal of 100Mhz above stock to start... this can be done generally without adjusting Voltages or Ram timings.
Basically just find your FSB in the BIOS and use the + or - keys to increase it...
also YHPM ;)
[XC] DragonOrta
10-12-2006, 02:11 PM
I thought that LV_DD already had Diablo_Legion OCed as far as he felt it would be stable.
I thought that LV_DD already had Diablo_Legion OCed as far as he felt it would be stable.
He went a tad conservative. So if he thinks I cannot go more I guess I am condemned to be a stable olde phart.