Project TwiceB&W completed! (56k beware!)

[Kato]

Hi guys, I finally finished my TwiceB&W project! Please feel free to comments on any improvement!

The water loop consists of Res>DCC+ with Radical turbotop>120.2 with 2xLoons>Storm>Res, just need Eddy's 7950 block to complete the package :D The system being cooled is listed in my sig, temp wise CPU Idle is 34C, Load is 46C with TAT@100%(40C with dualprime), room temp is 20C. I picked the Tygon R3400 to go with the black case, and used white CC light to bring out the details :D

As you know, Twice7 is only 14"x14"x14", so I had a hard time trying to find a way to place the 120.2, without modding the case. At the end I settled with this configuration, and the space between the 2 fans is just enough to fit the mobo tray :), and air is being sucked thru the rad from the 2 air intakes in the front. As you can see, there isn't much room left between all the components :D The hardest part was finding a way to hide all the extra PSU cables...for now I just left them in the corner.

http://home.cogeco.ca/~kchan/Twice7%20B%26W/DSCF0002.JPG
http://home.cogeco.ca/~kchan/Twice7%20B%26W/DSCF0001.JPG
http://home.cogeco.ca/~kchan/Twice7%20B%26W/DSCF0003.JPG
http://home.cogeco.ca/~kchan/Twice7%20B%26W/DSCF0010.JPG
http://home.cogeco.ca/~kchan/Twice7%20B%26W/DSCF0011.JPG


EDIT: More pics here! (http://home.cogeco.ca/~kchan/Twice7%20B%26W/)

[sephiroth8748]

Very nice looking. Where'd you get the black tubing?

[Movieman]

Very nice looking!:clap:
Mountain Mods Twice 7 case?

[Kato]

Yes, MM Twice7 :) And you can get teh R3400 from http://www.sidewindercomputers.com.

[tommrussell]

gotta tell ya the black tygon with the white or clear wrap really looks great and the white ccfl sets everything off nicely

how loud is the pcp&c 750 psu at full load, as im looking to get a new and quieter psu the pcp&c 850 is almost as loud as the deltas i have

[Kato]

The 750 isn't loud at all, its quieter than the dual 80mm fans IMO.

[SiGfever]

Kato,

Nice job! :toast:

The UV panels look very different under white light.

[phelan1777]

unlike the other cases with the different colors inside, at least with this one you can clearly see the hardware :P

Looks great.

[septim]

nicely done. cheers!!

btw Kato what card is that besides NB above 7950s on the pci-e 1

[ReD.SkY]

:slobber:

<3 color scheme

[Disposibleteen]

nicely done. cheers!!

btw Kato what card is that besides NB above 7950s on the pci-e 1
Looks to be the built in WIFI on his motherboard.

Very nice setup you have there, love how the colors you chose work together so nicely.

[Demo]

very nice, looks very clean. Keep up the good work!

[galimim]

Job well done

[JoeBar]

Looks to be the built in WIFI on his motherboard.
Indeed.

[marauder16]

that's some great looking setup, very clean :woot:

[SiGfever]

Kato,

Would you take some more pictures showing all of the case from different angles?
Thanks,

John

P.S. Seeing your work makes me wish that I had modded that baby myself. :toast:

[ShoNuff]

Nice job! Are you using the 1/2"ID, 3/4"OD R3400? If so, it looks like the coolsleeves fit well. I did not think they made it to work with the larger tubing.

Again, nice job! :up:

[Kato]

Thanks guys :D

The R3400 is the 7/16" ID 9/16" OD size, and the 5/8" OD coolsleeves fits perfectly.

I will get some more pics tonite John :)

EDIT: More pics here! (http://home.cogeco.ca/~kchan/Twice7%20B%26W/)

[Helmore]

How long are the cables on the Silencer 750W? Little off-topic maybe but I'd like to know, especially the length of the 8-pin and 4-pin 12V connectors.

[Kato]

How long are the cables on the Silencer 750W? Little off-topic maybe but I'd like to know, especially the length of the 8-pin and 4-pin 12V connectors.

If I remember correctly, they are around 1'-0"...too lazy to open up the case and measure :p:

[ReD.SkY]

1ft?
nah

im betting you meant to say 1'-10"

[james111]

Wow, what a nice looking system :O