PDA

View Full Version : my conroe build



whereisccguys
09-01-2006, 07:51 PM
Asus P5B deluxe
E6600
Corsair DDR2-800 XMS2-6400
Thermalright SI-128

XFX PV-T71G-UCF7 GeForce 7900GT 256MB
SilenX iXtrema Pro 450w
Lian LI PC-60
Samsung HD 300 Gigs

my main concern is if the power supply is enough for this system

i'm open to any suggestions or imporvements

thanks a lot

EsaT
09-02-2006, 03:44 AM
That PSU should be well enough if those are real watts instead of PR-watts.

perkam
09-02-2006, 05:54 AM
What the fark ?!?!?!?

What's wrong with you ppl ? Buy a 200W Rosewill why dont you and add an X6800 and a 7950GX2 while you're at it !!!

:shakes:

Check the psu section's deal of the month for the best deal on a VERY good psu that'll run your system oced to max.

Perkam

Quest_7F
09-02-2006, 06:04 AM
I agree with Perkam, there are always cheap psu's that are good quality. You dont want to just get any psu. Do some research on ur parts.

TaPaKaH
09-02-2006, 08:03 AM
Mobo: I have a regular P5B. With new BIOS goes up to FSB450 aircooled,which will be enough for E6600 (450x9=4050MHz) on air,so I think that there`s no point of buying P5B deluxe unless you want some XtremeOC or CF...
Mem: You can save some money on that too trying to look for A-Data DDR2-800 on Elpida chips, which goes 1000MHz+ easy and costs less.
Video: 7900GT is a good choice but try to look for 512MB version. 512MB 7900GT = underclocked 7900GTX w/different cooler.
HDD: 250 or 300Gb hard drive will be a good choice, but Samsung ... well ... it`s no good ... I would rather choose Maxtor 7V300F0 or WD3000KS which are a bit faster