Italianclocker
04-07-2003, 06:08 AM
I'm Italian not an Alien so do not think i'm different .
I' d like to explain what i did to my 9700 Pro ( Black PBC with Inf 2.8 ns)
For the GPU i removed the frame around the GPU and removed the Glue too from the frame and the pbc . After that i put the frame with the ATTAC K strong glue.
For cooling the GPU i used a Spark 7 ( It was so hard to fix it IN i got a little bit of WORK). For the other side ov GPU i used the Zalman 80A HP Passive cooling but not the all stuff i put only the piece where the hit-pipe has to be set on. I used the heatpipe in this way.
I made a hole in the center of SPARK 7 , From the side, to let the heat pipe go inside in the center of the Spark so that the hit pipe is allineated with the GPU.
On the other Side i had put a Crystal ORB on the heat pipe.
I used a 80 x 80 x 38 of 84 cfm for cooling better the spark.
For MEM I've found Heat sink all-copper but those where for Nvidia and 9000 memory chip so ive put 2 for each memory chip.
for the, AREA under the Silver Plate i used heat sink too but a 40 x 40 of 10 cfm.
I used also the original Dissy system that i put where was nothing to be cooled but whtever.
I didn't change my 9700 Pro in to a 9800 Pro but i'll do, because a guy here gain 1000 points changing the BIOS. so sooner or later i'll do this.
So with This cooling system and with the Xbitlabs -mod i was able to gain 450/380 ( I could more if i want but it works good so i leave it) and i did 21045 With 3d mark 2001, at least pumping my card i was able to gain 21206 BUT I know i could grew.
I did the same MOD of XBITLABS.
2.7k ohms resist 1.75 volt CORE
10k ohms resist 3.19 volt VDDQ
2.7k ohms resist 3.32 volt VDD
I would like, PLEASE, a detailed description of your MOD where u take the mod secially the Vref, wich values did you used .I would like to know better and pictures and explanation would be appreciated Thanks I hope you'll like my sistem and HELP ME.
I had Posted this because i think that your MOD is better than mine so i'd like to gain the best from my 9700 Pro
Pictures really needed because i don't understnd when you refers to the card.
Sorry for my english i hope u'accep my apologies
I' d like to explain what i did to my 9700 Pro ( Black PBC with Inf 2.8 ns)
For the GPU i removed the frame around the GPU and removed the Glue too from the frame and the pbc . After that i put the frame with the ATTAC K strong glue.
For cooling the GPU i used a Spark 7 ( It was so hard to fix it IN i got a little bit of WORK). For the other side ov GPU i used the Zalman 80A HP Passive cooling but not the all stuff i put only the piece where the hit-pipe has to be set on. I used the heatpipe in this way.
I made a hole in the center of SPARK 7 , From the side, to let the heat pipe go inside in the center of the Spark so that the hit pipe is allineated with the GPU.
On the other Side i had put a Crystal ORB on the heat pipe.
I used a 80 x 80 x 38 of 84 cfm for cooling better the spark.
For MEM I've found Heat sink all-copper but those where for Nvidia and 9000 memory chip so ive put 2 for each memory chip.
for the, AREA under the Silver Plate i used heat sink too but a 40 x 40 of 10 cfm.
I used also the original Dissy system that i put where was nothing to be cooled but whtever.
I didn't change my 9700 Pro in to a 9800 Pro but i'll do, because a guy here gain 1000 points changing the BIOS. so sooner or later i'll do this.
So with This cooling system and with the Xbitlabs -mod i was able to gain 450/380 ( I could more if i want but it works good so i leave it) and i did 21045 With 3d mark 2001, at least pumping my card i was able to gain 21206 BUT I know i could grew.
I did the same MOD of XBITLABS.
2.7k ohms resist 1.75 volt CORE
10k ohms resist 3.19 volt VDDQ
2.7k ohms resist 3.32 volt VDD
I would like, PLEASE, a detailed description of your MOD where u take the mod secially the Vref, wich values did you used .I would like to know better and pictures and explanation would be appreciated Thanks I hope you'll like my sistem and HELP ME.
I had Posted this because i think that your MOD is better than mine so i'd like to gain the best from my 9700 Pro
Pictures really needed because i don't understnd when you refers to the card.
Sorry for my english i hope u'accep my apologies