King_Tweaker
04-04-2003, 05:07 PM
I would appreciate any help on this issue I am having.
Just received my stuff from coolmods.com to do the vdd mod.
Before all I could get was 190fsb. I put in the vantec iceberg and nb fan onto the sb. Then did the mod, pin 11 that is, using their kit. They say its set to 1.9v which should be fine. Booted up and tried 200fsb, bang fine everything still ran fine, could never boot before at that voltage.
Basically the mod works and even 208fsb is fine, didnt try higher.
One thing that is plaguing me is even at 190fsb with same volts on the cpu and ram, same everything, the pc doesnt boot sometimes, or if i get to windows and restart for some reason, it may not restart properly, it hangs before the bios screen. This is still at only 190fsb or higher.
I am new to modding so should I reduce the volts going to the sb via the variable resistor, or is this just the bad thing about the pin 11 mod.
If I remove the kit and use the same 190fsb as usual this problem goes away totally.
Any inputs would be great.
Just received my stuff from coolmods.com to do the vdd mod.
Before all I could get was 190fsb. I put in the vantec iceberg and nb fan onto the sb. Then did the mod, pin 11 that is, using their kit. They say its set to 1.9v which should be fine. Booted up and tried 200fsb, bang fine everything still ran fine, could never boot before at that voltage.
Basically the mod works and even 208fsb is fine, didnt try higher.
One thing that is plaguing me is even at 190fsb with same volts on the cpu and ram, same everything, the pc doesnt boot sometimes, or if i get to windows and restart for some reason, it may not restart properly, it hangs before the bios screen. This is still at only 190fsb or higher.
I am new to modding so should I reduce the volts going to the sb via the variable resistor, or is this just the bad thing about the pin 11 mod.
If I remove the kit and use the same 190fsb as usual this problem goes away totally.
Any inputs would be great.