GSkill HZ's 0631 no longer D9's ?

[Lestat]

ok well i am getting word that the HZ's 0631 and later are no longer D9's ?
is this true ?
if so well im sure you all can imagine what i am going to say next.

are they Eplida ? and what is expected, with the right hardware of course, out of Eplida?

what ever the issue, if they are not D9's anymore this is going to explain why i cant do over 925 mhz no matter what i do.. ggrrrr!!!!

[dinos22]

outch!!! like i got 0630 sticks heh

[Lestat]

outch!!! like i got 0630 sticks heh

you were getting good speeds with yours werent ya dino ?

whats makes me mad is that they go and switch to a lesser IC and yet charge the same price.
IF its true.
but IF the Eplida chips can do equal to D9's then its my board not allowing the ram to go over 925 stable.
i thought people were making a stink about the Eplida chips before the D9's like how good they were ?

[andyisc00l]

you were getting good speeds with yours werent ya dino ?

whats makes me mad is that they go and switch to a lesser IC and yet charge the same price.
IF its true.
but IF the Eplida chips can do equal to D9's then its my board not allowing the ram to go over 925 stable.
i thought people were making a stink about the Eplida chips before the D9's like how good they were ?

I'd just return em and get some teamgroup, if you can't return it for free take a $30 dollar hit, I think they cost the same maybe $10 more and they use D9GMH

[Reefa_Madness]

I totally understand you being upset if the chips have been changed by GSkill.

I am personally getting annoyed with the "bait and switch" tactics used by some memory manufacturers.

It is one thing to do this in the "value" sector where the user is not likely to be tweaking the ram and another to do it in the enthusiast geared products.

We buy modules based on the chips used, not the color of the heatspreaders or the timings on the labels. When a product with certain chips performs well, we buy it expecting it to carry the same chips...we are buying the chips!

If it is done because they don't have any more ICs, then EOL the product and start a new batch with a different revision number. How hard is that?

[outcast623]

the Gskill Tech (http://www.xtremesystems.org/forums/showpost.php?p=1538804&postcount=3) said as long as the are in production they will be miron d9.



I have had nothing but good results!!
its up to you if you believe him or not.

[alpha0ne]

I hope they dont change now as I have recommended the G.Skill PC6400HZ to half the ppl in AU, we even ran out of stock in AU for a while because eva2000 bought them all :fact: :eek: :D

[GSKILL TECH]

ok well i am getting word that the HZ's 0631 and later are no longer D9's ?
is this true ?
if so well im sure you all can imagine what i am going to say next.

are they Eplida ? and what is expected, with the right hardware of course, out of Eplida?

what ever the issue, if they are not D9's anymore this is going to explain why i cant do over 925 mhz no matter what i do.. ggrrrr!!!!

LMAO
i wonder who told you those incorrect news!
F2-6400PHU2-2GBHZ is still using D9
i don't understand everyday you said "this is no good" and "that is no good"
but don't you think your mobo is bad?!

[GSKILL TECH]

I hope they dont change now as I have recommended the G.Skill PC6400HZ to half the ppl in AU, we even ran out of stock in AU for a while because eva2000 bought them all :fact: :eek: :D
i know AU is out of stock and i told our sales to ship more to AU soon..
also becasue AU doesn't have our REP over there, some RMA is very slow, i am think how to solve this problem now....

[Lestat]

i thought i remembered you guys saying that as long as they were in production, they were D9's.
i'll pull the spreaders if i have to. when it comes right down to it.
i was thinkin of seeing if FCG had some time to test the ram out for me. i'll have to give him a buzz.

lol Eva bought them all. funny but i believe it lol


but anyways. i started the thread cuz off what i was hearing not to accuse or anything.
but the ol bait and switch is common practice so i started to get a little concerned.

[dinos22]

next time pm g.skill tech and don't spread crap on XS me thinks :stick:

reminds myself not to take you seriously lol

[Lestat]

i asked a very simple question since a major distributor is claiming the new HZ's are Eplida chips.
fvck it im removing the spreaders tonight

its a legitimate question also.

and talkin trust ?

dinos.. gskill claims the DS3 dont like D9 do you trust that ? i dont think so considering there are PLENTY of people with HZ's running well over 1000mhz.
gskill ram TG ram.. and those goofy OCZ 6400's that are running over 1000, ( dont know what chips they use.)

[dinos22]

NO!!! G.Skill did not say that as i know they confirmed HZ work fine.........

[eva2000]

I hope they dont change now as I have recommended the G.Skill PC6400HZ to half the ppl in AU, we even ran out of stock in AU for a while because eva2000 bought them all :fact: :eek: :D:lol2: only bought 3 sets to play with :D

[dinos22]

:lol2: only bought 3 sets to play with :D
yeah sure mate i believe you :slapass: i rang evey store in australia at the time and everyone told me the same story >> out of stock some crazy mofo from Brisbane rang yesterday and waived the magic CC and took all the RAM man.....no joke

who should I believe hey :slap: :D

[syne_24]

:lol2: only bought 3 sets to play with :D

wow 3 sets lol! You should pick up the GBGA ones..I wonder how does that compare with HZ

[GSKILL TECH]

if can't find 800 2GBHZ then just get 667 2GBZX (remember check it is 0606/0628 or later)
or 667 2GBGA. they are the same :D

[dinos22]

if can't find 800 2GBHZ then just get 667 2GBZX (remember check it is 0606/0628 or later)
or 667 2GBGA. they are the same :D
micron d9gxx as well or micron D9xxx

what can we expect from ZX week 0606/0628 :)

[ooeric]

::::hugs:::: my HZ 605.. D9GMH

[Homek]

if can't find 800 2GBHZ then just get 667 2GBZX (remember check it is 0606/0628 or later)
or 667 2GBGA. they are the same :D

My serial is 71601xxxxxxxx. Are these still micron IC's?

Rgs

[GSKILL TECH]

My serial is 71601xxxxxxxx. Are these still micron IC's?

Rgs
what model?

[ohsnapsjay08]

lol, I have 2gbhk and i hit 1000+mhz lol. something is really wrong with your mobo or something.

G.s. technician, Is it worth to switch from 2gbhz from 2gbhk IF....

I am hitting 4-4-3-5 14tRc on 1000mhz+ and at PI 25.57 3.4ghz. would be such a big margin from 2ghk's chip to d9chip? (2gbhz) what would be your input on this. (DDR2 800 pc2 2gbhk 1gb x2 is what i have btw.)

thanks in advance.!

Gskills ftw!!

[GSKILL TECH]

lol, I have 2gbhk and i hit 1000+mhz lol. something is really wrong with your mobo or something.

G.s. technician, Is it worth to switch from 2gbhz from 2gbhk IF....

I am hitting 4-4-3-5 14tRc on 1000mhz+ and at PI 25.57 3.4ghz. would be such a big margin from 2ghk's chip to d9chip? (2gbhz) what would be your input on this. (DDR2 800 pc2 2gbhk 1gb x2 is what i have btw.)

thanks in advance.!

Gskills ftw!!
in fact, i think 800 HK is better for 24/7. why?

becasue MT chip is very good for overclock but who is going to use 2.6v 1200 CL4 everyday without damage memory. that just want i think. plus price is lower too

[Homek]

what model?

F2-6400PHU2-2GBHZ

Tk.

[Homek]

My serial is 71601xxxxxxxx. Are these still micron IC's?

Rgs


what model?


F2-6400PHU2-2GBHZ

Tk.

clarifying to my consultation it does not have?:eek:

rgs.

[guess2098]

clarifying to my consultation it does not have?:eek:

rgs.
i don't see any point to ask this. everyone knows 800 2gbhz is using d9 after 0604 or 628 later

[GSKILL TECH]

clarifying to my consultation it does not have?:eek:

rgs.
it is D9GMH probably

[Homek]

it is D9GMH probably
thank............ probably or that another possibility could be???

rgs.

[GSKILL TECH]

thank............ probably or that another possibility could be???

rgs.
that means not sure it is GCT or GKX or GMH