View Full Version : Confusion about F2-6400CL4D-2GBPK
garnin
08-07-2006, 07:30 AM
Hi, I am somewhat confused about what voltages I should be running the 2GBPK RAM at. On the G.skill web-site and several retailers, it says 1.9-2.0 V. However, on other sites and on the RAM itself, it says 2.0-2.1 V.
So what voltage can I run this RAM at? What is max tested stable? Thanks
G.S EUTech
08-08-2006, 11:07 AM
2.0~2.1V is the safe voltage for the 2GB PK.
Cocacola
08-11-2006, 07:23 AM
HI,
Im planning to get this RAM. is it compatible with Asus P5WDH?
and also what chip this RAM using? is it D9 or else?
thanks
GSKILL TECH
08-14-2006, 04:13 PM
yes it is compatible but it is not micron chip
garnin
08-15-2006, 07:02 PM
These are good sticks of RAM.
But if you're going to overclock, do yourself a favor and keep these sticks at 2.0 V. They are extremely picky over what voltage they will run at and threw up errors in memtest if I went above or below 2.0 V.
I've gotten this RAM to run around 825 MHz with a 4:5 ratio with no problems.