WC Setup

[cyberspyder]

hi, i would like your opinion on this WC system:

-Swiftech H20-120 Premium (pump, CPU block, Reservoir, rad.)
-Swiftech MCW60 w. ramsinks (GPU block)
-Swiftech MCR220 (radiator)
-2x120mm fans (brands??, preferably cheap)

I have an Antec SOLO case, and would like the new radiator (the 2x120mm fan one) to be mounted on the bottom left corner on the side panel. i understand that there will be some modding required. i also want the radiator to be a fully integrated solution (i.e. no exterior parts, all the parts have to be inside the case). i have a system consisting of an ASUS A8N-SLi Premium mobo, an Athlon 64 3000+, and a eVGA 7600 GT. Even though this would be a heavy investment, it will be useful in the long run because i will OC my system.

system: http://img394.imageshack.us/img394/4835/wcsetup4yb.jpg
red:radiator
yellow:pump+reservoir
green:GPU block
blue:CPU block

Brendan

[cyberspyder]

*bump

[Okda]

only one thing to say

READ the STICKIES

cause why will u buy the kit and then buy the MCR-220

what is ur budget for W/Cing ?

[cyberspyder]

$300 or so

[ReD.SkY]

well...

Swiftech storm
MCW60
MCR320
DDC+ w/ plexi top
T-line
Masterkleer tub

[sdkevin]

ReD.SkY, Performance PCS has ThermoChill PA120.3 in stock

[ReD.SkY]

already got one from MM.. should be here tomorrow :0

[cyberspyder]

problem is that i can't find a place to put a 3x120mm rad in my case, so will it be ok if i went with a 2x120mm? also, i forgot to tell u guys that i want this system to be as quiet as possible :)

[N H O]

id recommend some yate loon fans ;)

http://jab-tech.com/YATE-LOON-120mm-Case-Fan-D12SL-12-pr-3009.html

[Okda]

here it is the best bang for buck setup IMHO for ~300$

[1] CPU Block = AquaXtreme MP-05 SP (http://www.petrastechshop.com/aqmpspliedun.html) LE or Swiftech Storm Rev. 2 (http://www.petrastechshop.com/swstexpeunwa.html)

[2] GPU Block = Danger Den Maze4 (http://www.petrastechshop.com/dadenma4gpum.html)

[3] Pump = Swiftech MCP655 (http://www.petrastechshop.com/swmcin12pu.html)

[4] Radiator = Swiftech MCR-220 (http://www.petrastechshop.com/swmcqposerab.html)

[5]Tubing = 1/2" ID (3/4" OD) Masterkleer Clear PVC Tubing (http://www.petrastechshop.com/1id3odmagepu.html) ( belive me 7/16 is a pain in the @$$ to install )

[6] 1/2" OD T-Fitting (for 1/2" and 7/16" ID Tubing) (http://www.petrastechshop.com/1odtf1and7id.html)

[7] Machined Delrin Fillport/T-Line Cap (http://www.petrastechshop.com/madeficap.html)

[8] Fans = Yate Loon D12SL-12 (http://www.petrastechshop.com/12yalod1cafa.html) ( those are the best fans ever u can buy if u r looking for silence )
u will need some Warm-Drives from anywhere, Distilled Water, Vinegar and optionaly u can buy Swiftech HydrX (http://www.petrastechshop.com/swhyexduco.html) to prevent Algae growth with a nice green look

[cyberspyder]

not sure about masterkleer tubing, but i've heard good things about tygon tubing. just want opinion on these two brands.

Brendan

[Okda]

Tygon is the best but very expsinve

Masterkleer is the second best and very cheap

REad the stickies please

[ReD.SkY]

lol... i see why maxxx gets so mad, no one reads the stickies lol (no offence) but its true lol

[Batman!]

Just a lil tip, even though petras tech is one of my fav places to shop, you can get a Aquaxtreme MP-05 SP LE for 60 bucks @ dtekcustoms.

[cyberspyder]

kk thx.