PDA

View Full Version : G.SKILL 2GB DDR2 800 Dual Channel



Mr_Slinky
06-22-2006, 02:42 PM
I bought this from newegg about 2-3 days ago link (http://www.newegg.com/Product/Product.asp?Item=N82E16820231065) as to up grade from my OCZ Gold PC5400 before I switched out I reset bios meaning go into bios load all the defaults. Then reset cmos and to make sure I wouldn't have any timings in there and put the sticks in.

I boot up the machine and I hear it all click on and spin up but nothing is going to the screen. (I have also tried booting up after I had the sticks in and started the machine up and it doesn't work) tried each stick in each slot and no combination of those worked either.
tried 2 different pci cards and pci-e card all NVIDIA mainly to rule out a bad slot that wasn't is so I got frustrated and put my old sticks back in and they booted up no problems.
The system specs are
MSI K9N SLI bios is 5/23
AMD 3000+ Orleans
Insert ram here G.Skill, OCZ, or patriot
Antec neo 480w power supply
80 GB WD caviler SATA
Sony drw 501

The ram I have are here mainly because the OCZ is being sold locally so I needed something to hold me over so I got the Patriot since the G.Skill wasn't working.
patriot ram (http://www.newegg.com/Product/Product.asp?Item=N82E16820220147)
OCZ ram (http://www.newegg.com/Product/Product.asp?Item=N82E16820227046)

Any help anyone can give me would defiantly be a big help
I don’t have any other systems that take ddr2 but if 2 sets of ram work and another doesn't I find that a little bit hard to believe.

GSKILL TECH
06-22-2006, 02:50 PM
man i am so sorry
if possible could you let me know what is this 0605 (May)or 0606 (June) one.
the 1st batch was not program correct for AM2 but the later one should fixed.....

Mr_Slinky
06-22-2006, 04:02 PM
man i am so sorry
if possible could you let me know what is this 0605 (May)or 0606 (June) one.
the 1st batch was not program correct for AM2 but the later one should fixed.....

rgr these are 0605 on the SN is this correct that its the manufacture date.
and is there anything i can do to get them to work right on the AM2
or should i just rma them back to newegg.
and if so what do i tell them since they may work correctly.
thanks much for the quick reply
John

GSKILL TECH
06-22-2006, 04:28 PM
yeah i think you got the 1st batch
you can send it to me and i will reprogram and overnight back to you

let me know

Mr_Slinky
06-22-2006, 04:46 PM
yeah i think you got the 1st batch
you can send it to me and i will reprogram and overnight back to you

let me know
that sounds good i will pm you now!!
thanks much