View Full Version : how are the new dothans clocking?
i found nemo
06-11-2006, 08:30 PM
should be gettin' one soon so what should i expect?
cirthix
06-11-2006, 09:25 PM
2.7-2.6ish is pretty much the norm
Rovtar
06-12-2006, 12:41 AM
i think that old proc. are clocking just like new one..
so you can clock it to 2.6 -2.7 just like cirthix said. if you get god proc. even more
i found nemo
06-12-2006, 04:17 AM
hmmm, thanx guys
Piotke
06-12-2006, 05:34 AM
REcently I bought about 10 dothans. Where my older chips clocked up to 2600 Mhz, the newer tend to scale up to 2700 - 2800 Mhz.
This could be only an impression, because I know tips and tricks now, but it seems there a bit better.
i found nemo
06-12-2006, 08:44 AM
then i'll definately be pming you for advice ;)
AgonxOC
06-12-2006, 09:08 AM
Mine is at 2.8Ghz and I am sure it could do better with more stable volts (No drop mod) or water cooled... I am going with the conroe as soon as it hits the market...
Alex
i found nemo
06-12-2006, 11:16 AM
what is the typical voltage requirement?
Piotke
06-12-2006, 11:19 AM
Most did 2,6 GHz+ at 1,45 Vcore. To get over 2,7 I needed 1,65 Vcore (easily pinmodded)
cirthix
06-12-2006, 12:00 PM
what is the typical voltage requirement?
1.55v+/-.1v
i found nemo
06-13-2006, 04:41 AM
how long can the chips hang with the voltage for.
railer
06-13-2006, 07:13 AM
I have run my Dothan @ 1.55Vcore all the time and the cpu seams fine. Just make sure the temps wont go ower 60C @load and u should be fine
i found nemo
06-13-2006, 07:18 AM
can someone give me a hi res pic of how to wire mod these things to 1.55, 1.45 and 1.6 cuz last time i did something with a processor ( 100 fsb to 133 on old celly) it quit workin' cuz i got the wrong pin
cirthix
06-13-2006, 09:13 AM
p4p800se has full voltage adjustments in bios, same with fsb, multi, and others.
i found nemo
06-13-2006, 09:14 AM
asus said that it will not work cuz power is supplied by ct-479 ... well wtf then?
Piotke
06-13-2006, 10:50 AM
Pin mod:
http://forums.legitreviews.com/about1525.html
i found nemo
06-13-2006, 01:16 PM
tyvm
rivers
06-13-2006, 02:49 PM
A little off topic.. what's the J in the 730J stands for?
PS
740@2.80 on air
cirthix
06-13-2006, 05:45 PM
asus said that it will not work cuz power is supplied by ct-479 ... well wtf then?
they are wrong.
full voltage adjustments are in bios
cirthix
06-13-2006, 05:49 PM
A little off topic.. what's the J in the 730J stands for?
PS
740@2.80 on air
j is for having the xd bit feature
i found nemo
06-14-2006, 06:56 AM
and ability to change multies. but the boards see the max multi first which is why ppl have problem booting with high fsb
also cirthix, thanx for the information on the voltage. and other info that you've provided
I got Q609 740 dothan very cheap which is obviously 9th week of this year. Will post results later
i found nemo
06-15-2006, 09:05 AM
ok kiwi keep us updated