View Full Version : What is needed for 8,000MB in Sandra?
CHaynes112
06-11-2006, 11:26 AM
just curious...
-Thanks
freecableguy
06-11-2006, 03:24 PM
DDR2 @ DDR-900, 3-2-2-x with Conroe. ;)
CHaynes112
06-11-2006, 03:38 PM
Conr... WHO?! :D
I'm talking about AMD 939-pin... :p:
Shrodix
06-11-2006, 11:07 PM
opteron @ 10*300 with ram Ã:banana: 300 2.5 4 4 5
perkam
06-12-2006, 07:29 AM
just curious...
-ThanksPretty simple with AM2 actually ;)
http://www.clockmehigh.com/cooler/screens/AM2/292x10_DDR2-972_Sandra2007Buffered.png
You can do that with a $350 mobo/cpu combo :p: AM2 > Conroe in mem bandwith. Think 12.5k sandra for high end AM2 CPUs.
Perkam
CHaynes112
06-12-2006, 08:52 AM
Conr... WHO?! :D
I'm talking about AMD 939-pin... :p:
:D
Yeah, AM2's are bandwidth monsters. I will be trying tonight with an Opteron 165 @ 3.006GHz (334x9) and 2GB Ballistix @ 300MHz (3-3-3-8) 9:10 divider. Hopefully I can tweak the alphas enough to do it. If not, I may try CPU @ 3.024GHz (336x9) and RAM @ 302MHz (3-3-3-7) 9:10 divider... hopefully I will reach my milestone goal :p:
-LaTeR
freecableguy
06-13-2006, 01:58 PM
Pretty simple with AM2 actually ;)
http://www.clockmehigh.com/cooler/screens/AM2/292x10_DDR2-972_Sandra2007Buffered.png
You can do that with a $350 mobo/cpu combo :p: AM2 > Conroe in mem bandwith. Think 12.5k sandra for high end AM2 CPUs.
Perkam
Think Conroe slaughters AM2.
Gautam
06-13-2006, 02:20 PM
Not in raw mem bandwidth it doesn't (http://www.xtremesystems.org/forums/showpost.php?p=1481612&postcount=31). Granted, thats about it.
bachus_anonym
06-13-2006, 02:30 PM
just curious...
-Thanks3.2GHz single-core Opteron + 2GB UCCC @ DDR580 8-4-4-3.0-1T pulled 8187 / 8133 (http://www.clockmehigh.com/ddr/CE5vsUCCC/Sandra_Everest_UCCC.png). I believe, with dual-core it should be a bit easier.
CHaynes112
06-13-2006, 04:55 PM
CPU - Opty 165 @ 3.024 (336x9)
RAM - 2GB Ballistix @ 273 (3-3-3-8-150 div)
got 7768MB...
still trying to get this RAM stable... it has done 306MHz (32M stable) in another rig... hopefully I can get it to 302 (180 div)... i think that would do it
Vapor
06-13-2006, 09:23 PM
3.2GHz single-core Opteron + 2GB UCCC @ DDR580 8-4-4-3.0-1T pulled 8187 / 8133 (http://www.clockmehigh.com/ddr/CE5vsUCCC/Sandra_Everest_UCCC.png). I believe, with dual-core it should be a bit easier.Dual Core knocks down quite a bit of bandwidth, unless Errata 123 is disabled (then only a little).
I had a 3.05GHz Opty 146 and some 277MHz 2-2-2 2x512MB action getting over 8k, never got around to running anything other than CH-UTT on that CPU, but I'm sure my TCCD woulda stomped on that :cool:
Tuvok-LuR-
06-14-2006, 06:00 AM
I did 8200 with that:
http://img289.imageshack.us/img289/5388/sandra82922ny.jpg
ahpaul82
06-23-2006, 08:32 AM
curious to know,
what program/application need so much memory bandwidth ? :confused:
CHaynes112
06-23-2006, 09:37 AM
curious to know,
what program/application need so much memory bandwidth ? :confused:
none, I just think it's cool :D
I am upto 7,980MB with the following...
CPU - 3.006 (334x9)
RAM - 300 (3-3-3-8-1T-183div)
I can nearly taste 8,000... just trying to stabilize this crazy RAM and tweak the alphas a little more :p:
Nanometer
06-28-2006, 09:46 PM
I don't understand why the AM2 bandwidth isn't helping like I thought it would.