scoobie dave
05-29-2006, 01:46 PM
Hi I hope you can help me out.
Im currently using a dfi expert motherboard along with some zx and I was wondering what the best settings are to use? I have noticed that this motherboard seems a little more sensitive to memory settings compared to my old SLI-DR. With my current setup im running 334x9 along with a 120 memory divider so im running the memory at stock speed with the tightest timings. Im a little unsure as was tref settings to use and im trying out most of them over time, im currently using 0388. Also drive strength and data drive strength im a little unsure what to use, im using 7/3 at the moment (not sure if thats the best though).
If anyone can give me any tips for what settings to use, I would be most grateful. Im sure it will be handy for other users too in future.
Thanks.
My bios settings are at the moment:
2.7v
Dram Frequency Set: 120 Divider
Command Per Clock: Enable (1t)
Cas: 2
Trcd: 3
Tras: 5
Trp: 2
Trc: 8
Trfc: 14
Trrd: 2
Ter: 2
Twtr: 2
Trwt: 2
Tref: 0388
Twcl: 1
Dram Bank Interleave: Enable
Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7
Darm Date Drive Strength: 3
Max Async Latency: auto
Darm Response: Normal
Read Preamble Time: auto
Idlecycle Limit: 256
Dynamic Counter: Disable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable
Im currently using a dfi expert motherboard along with some zx and I was wondering what the best settings are to use? I have noticed that this motherboard seems a little more sensitive to memory settings compared to my old SLI-DR. With my current setup im running 334x9 along with a 120 memory divider so im running the memory at stock speed with the tightest timings. Im a little unsure as was tref settings to use and im trying out most of them over time, im currently using 0388. Also drive strength and data drive strength im a little unsure what to use, im using 7/3 at the moment (not sure if thats the best though).
If anyone can give me any tips for what settings to use, I would be most grateful. Im sure it will be handy for other users too in future.
Thanks.
My bios settings are at the moment:
2.7v
Dram Frequency Set: 120 Divider
Command Per Clock: Enable (1t)
Cas: 2
Trcd: 3
Tras: 5
Trp: 2
Trc: 8
Trfc: 14
Trrd: 2
Ter: 2
Twtr: 2
Trwt: 2
Tref: 0388
Twcl: 1
Dram Bank Interleave: Enable
Dqs Skew Control: Auto
Dqs Skew Value: 0
Dram Drive Strength: 7
Darm Date Drive Strength: 3
Max Async Latency: auto
Darm Response: Normal
Read Preamble Time: auto
Idlecycle Limit: 256
Dynamic Counter: Disable
R/w Queue Bypass:16
Bypass Max: 7
32 Byte Granularity: Disable