- Dedicated PSU for 4x226W TECs?
- 12v line to low
- beer water cooler
- just some pics
- ID the Hot/Cold Side plz
- Thinking about a TEC setup...
- Delay timer needed with TEC setup?
- aircooling pelts for cpu?
- Better to remove IHS for TEC cooling or not?
- could i use this on my nb?
- temps too high :(
- X800XT + MCW50-T worth it ?
- meanwell sp-500-15
- Advice on TEC cooling
- whats the best way to use several tecs?
- Pelt Chilled water!
- TEC setup is UP and running STRONG!
- Power savings and a tec
- Molex connector on a 172 watt TEC or no?
- whats that forum ?
- Check this out...360w TEC Block!
- Power Supply Question.
- TEC Watt Limits
- Thinking of upgrading to TEC
- Tec Help Mcw462-uht Nothing On Screen
- Melted molex - MCW50T (pics)
- Enermax 460W
- UK TEC Suppliers...
- mcw5O WITH 172 WATT TEC ARE THE TEMPS right??
- T.E.C. / phase change
- 172 watt peltier enough to cool A64?
- 2 x Meanwell S320-12 in parallel?
- 15V or 12V PSU for 15.2V max TEC?
- chillcontrol
- tec setup almost finished - pics + need some help
- Pump Relay Switch Broken?
- couple questions about cooling x800 w/ 226w tec
- Will this PSU work?
- How much heat can the Maze4 dissipate?
- Just got a NEW Meanwell unit....this is a bad mutha...
- Stacking Pelts?
- Take a look at this PSU
- mc 371!
- Project LUNAR ICE
- Measured temperatures (data collection)
- Is ths TEc Good or BAd Or Ok
- Mcw50t + X800pro
- Air Cooling Stacked Pelts.
- MCW50-T pelt cooling enhancement
- AS Ceramique is NOT better than AS5 with TEC...
- some questions!
- 1 HC enough for CPU block and MCW50-T ??
- TEC For desktop barton
- Bad news...I connected TEC wires backwards...
- Will this dissapate 550+watts of heat?
- I want something to mess with...
- New to TEC
- Has anyone run a TEC setup for some time without a problem?
- 350w Tec?
- New custom TEC setup done...
- psu to 12v cooler
- Moving on to TEC setup from water
- Swiftech or DangerDen pelt setup?
- Pelt on GPU without water
- Help me with TEC temps
- Removing Conformal Coating Safely
- Dow Corning vs Dielectric Grease
- 110w tec for 9800pro
- TEC Cooled Heat Exchanger
- How to Turn your Old Generic PSU into a TEC Power Supply
- My New Tec!!!!
- TEC setup up and running, -14C idle
- Best way to power 24v TEC's
- single heatercore enough for 170ish watt pelt on GPU?
- Few thoughts on my TEC cooling
- 170W 15.5v TEC on 12v will put out xxxW ?
- Heres an Idea for TEC
- Best 12v 40mm Peltier?
- Will this power supply handle a 80watt TEC and a 226?
- tec and AMD 64 winnie
- First T.E.C cooled system
- Pelted Aluminum MaxiJet Res.
- Seprate Loop for TEC video card or use current cpu loop
- Is it worth moving to TEC?...
- Someone has a 90w T.E.C. and cooling a 6800gt/ultra with it? results?
- *urgent* What kind of a radiator would I need to hold 80watt and 226 watt peltiers?
- OK guys what should I do?
- TEC on a DD RBX?
- does this block manage that tec ?
- Cascading 80w & 172w GPU TECs?
- TEC Newbie Question
- Quick question.
- X800 XT PE and tec
- What do you use for temp probes?
- Thinking about 360W/437W TEC cooling...
- Dominator Pro 437 Performance
- Water Pump Selection
- Do I Need
- Looking for more volts
- Possible TEC Setup?
- TEC cooling x800 soon
- would this work well for a 172?
- will this probably work?
- tec calculations
- Peltier on TDX?
- What Wattage Peltier for X800XL?
- TEC n00b question: Winchester subzero bug
- Got my Swifty MCW50-T ready to setup in two days
- 60watt Pelt Questions.
- 9600XT GPU+RAM peltier cooling
- Air cooled pelt hot off the CNC
- direct peltier cooling
- TECs from eBay
- some tec with air cooling questions
- In series
- Will MCW50-T + MCW50 adapter kit be able to fit on 6800U?
- need advice re cpu heat output
- Potential TECer
- Heat output of 1.6Ghz LV Xeon
- Joining 12v + 5v = 17v?
- Rad question...
- Electric Radiator for WCing?
- Peltier Chiller, nearly done!
- Power Supply Question (Read the stickie)
- new from wintschlabs Arctic Spider 437w 6800 cooler and Arctic Web 437w CPU cooler
- Best Blocks for CPU + GPU?
- Peltier air conditioner
- 437W TEC for 6800
- need help about TEC.
- What temps to expect From a 226w on a 1.6v 4ghz+ Presscot on good water...
- MCW50-T + 172w tec@12V enough for x850xt?
- Would a RBX block work for TEC cooling?
- How Long do TECs Generally Last?
- Is The Wintsch Labs Arctic Web a Good TEC Setup?
- Dual T.E.C. my journey to -37℃(39pics)
- My new pelt
- Need help of the type of peltier and specs to be used
- Using TEC to cool the H20 of Liquid Cooling
- tec question.
- Peltier/Water Cooled...disapointing
- TEC Block design
- TEC + fridge(s) project
- Sacrifice a single TEC?
- 375W Pelt help
- Commercial TEC block or mod my own?
- Cooling extreme peltiers (300 watts or highier)
- Tec compatibility?
- TEC info
- My T.E.C. plan - 437W pelti on a P4 650 and maybe a tec on the x850 pe?
- Urgent tempereture question...
- Iwaki pumps and dedicated power supplies in Europe
- Peltier cooling a winnie or venice
- Dominator Pro 437 Up & Running
- Huge peltiers! :D
- Gigantic 6800 Tec
- Question About Pelt Feasibility
- Abit AN8 Series Motherboard - Operating CPU @ -C
- ?...which is best WB for Wintsch 226w TEC
- 120-150W pltier
- MCW5002-64T + Swiftech H20-120 REv.3a thoughts
- Pelt + water chiller
- Why not air cool?
- Its finished
- Hot tec wires
- Triple Rad enough for 80W TEC?
- Dominator Pro 437 Performance Update
- Pelt setup; finally done
- Selecting from 2 good water blocks
- Putting an inductor in a Home Built PSU
- TEC on X800XT PE?
- PcTuner.net present T-Rex3
- TEC Quality- some better then others?
- 24v TEC?
- multiple TECs cooling a res?
- effective use of pelts at my disposal...
- Tec noob in need of help :(
- TEC is making a comeback...
- how can i control a 170w tec??
- Take one box and cool with pelt?
- Stacked TECs temperatures?
- thinking about TEC
- Ordered my TEC's, now what?
- Cold Beer with a TEC
- Tec Setup Gone Wild
- A prescot too much for 320 watts?
- Diode Bridge Hot!
- 12v, 19A PSU question, (need 12v 25A)
- 9800PRO(R360)Peltcooling but aiircooling the pelt. Can it be done? Advice needed
- Gf 6800 - 80W tec usefull or not
- TEC ID ? Also Coldplate question ?
- So I peltier cooled my SFF Shuttle
- Control Box
- MCW50-T modified for dfi sli
- Must remove IHS for TEC cooling??
- thinking tec instead of only water
- Where to get a TEC in the uk
- Any database of peltier results??
- Designs for cooling peltiers with water.
- Power Draw Question
- 172W Peltier...
- bad Pelt ???
- 3000+ vs. 86w air cooled TEC
- Almost 100 watts OVER?
- Suitable for power?
- Tec Ram Cooling
- n00b post! Yay! (Explain peltiers to me, please?)
- DIY Gpu block
- Building a power supply
- TEC undervolting charts
- Lian Li PC75B - Dominator Pro 437 Images
- Question
- swiftech MC50 + peltier
- T.E.C stacking
- Interested in TEC's: Ok on AIR?
- X800 Maze4-1 Help
- Do these temps seem right?
- A condensation problem?
- Connecting multiple tecs to one psu
- Repairing a Peltier
- Insulation - Socket 775
- Suitable TEC for X800XT?
- Were to get cold plates?
- Running a TEC at 5 or 7v?
- Any comments before I start my TEC chiller ?
- Tec Power Suck-age Charts
- w00t got 172w pelt!....wtf to use it for??
- Wiring a Arctic Web.
- Prep for pelting
- centralized or delocalized (i think those are real words)
- Is this a good TEC set up?
- Can this waterblock/TEC be mounted on a naked core?
- What psu?
- 226 TEC on x800pro?
- Which waterblock/TEC should I use?
- 172w tec on a 9800 pro??
- advice on t.e.c!
- TEC on x800xtpe
- Can I use thermal paste instead of dielectric grease?
- Thermal compounds
- advice on this please(stacking, got an idea)
- Powering a 320 watt TEC
- A64 Pelt help :-) (noob questions)
- gf2u+tec
- 7800gtx tec cooling.
- Question about pelt cooling vid card in a water cooling rig
- new tec and water cooling project need help
- X800xtpe TEC block design
- any potential problems with this tec set up?
- Do I have to put a pelt on both?
- Maze 4-1