- A good place to buy brazing equipment and other tools
- Cooler Express 2010/2011 CE-48-S-1C Review
- Expansion Tank -Can i use this?
- Do's and don'ts of a first time sub zero?
- Compact Cascade
- R404a vs R507 - load temperatures ?
- Motherboard upside down?
- i7 970/980x expectations on a single stage?
- Looking to integrate Vapochill LS into case - need ideas and tips.
- Accumulators
- noob cascade question
- new SB and my trusty VapoChill
- Condensor Fan sizing
- Recommendations on a SS Builder/Setup
- The biggest CPU for now
- fluid immersion (boil the whole computer)
- Conformant coatings?
- Blends. What are there for what temps?
- Insulate under CPU necessary?
- Shot blasting a compressor
- Compressor cooling
- This filter okay to use
- Water cooled condensers, coil, stack
- Hi all!
- Pretty day out -- lets build a cascade
- Need some help with a SS Fix in Tampa, FL
- suction line heat exchanger design for rotary compressor
- Idea for evap.What do u think?
- Monster Under the Ice Single Stage
- Hot Gas - Where do i take it off from
- Phase on Sandy Bridge ?? Or GTX580??
- EU; 350W SS, -50C, doable?
- Acetone is our friend, removing armaflex off compressor
- Build detials, invervations, style, pimping share your thoughts
- need wiring help
- auto Bypass on Cascade
- Compressor placment - distance from condenser
- My First Single Stage Rebuild
- XtremeLabs.org Snowflake (simple SS project)
- phasechange singlestage
- Frostking / Neoprene Question
- The Good Deal and Current Project Share-a-base
- A "crio" SS by Stelios
- whats the best cpu thermo greese for -45c ss phasechange
- Hard Foam Inserts
- heater element single stage phasechange
- Cool pics, that are... cool?
- Started collecting parts
- ss jinu phasechange
- temp probe meter ?
- First Cascade by Kamil_Grzbiecik
- Cascade usage question
- potential oil trap
- Daily, 24/7, silent CASCADE with case
- Single Stage High Load
- Time for a VaporChill LS Upgrade
- SC18CLX.2 electrical/misc questions
- k-probe pluged in meter -38c
- Coming back to phase change
- Window Unit Rebuild
- 2lb receiver
- Small Phase change setup
- Cascade for daily use
- Simple Cased high load unit
- Way to reduce start-up pressure in 2nd stage
- TXV pressure
- looking 4 the strongest 1/5 compressor
- 980x expectation on that compressor ???
- using fridge compressor for propane based refrigerant recovery
- Condensation phasechange unit Question
- looking 4 thin & tall & quiet compressor !!!
- all good compressor brands !!
- Desuper question
- Just another another Rotary Singlestage
- A Strong SS for the new AMD FX (Bulldozer)
- Upgraded and completed my old cascade.
- Vapochill Lightspeed Start-up problem
- NL11F right tunning ???
- Rotary SS 24/7 , need all advice
- why "real tempe" stuck only on -7
- Mach II, cable-start, how-to?
- R-23 on SS ? (nl11f) expectations ???
- i got some questions....
- Single Stage Rebuild
- "watt" Questions
- What will happened ???
- Great friends, surprise packages!
- The Workshop Thread
- Miny Cascade : Budget Dual 1/2hp
- LG NK164PAB lifespan
- Ethylene as a refrigerant...
- kang's cascade form AC-2
- How to make a vacuum pump?
- help me remember how to work my unit
- My new Liquid cooled SS, and Where is the problem?!
- Quick question..
- Monster SS Phase built by Ron
- Refrigerant Purchase
- First foray into SS phase...need some advice
- On the look out for my first phase unit =)
- so frickin bored....,
- [Scratch Build] Phase Changer RIG.
- Water-cooled condenser (will this work?)
- Aspera ne2125gk
- Cant find a controller anywhere
- Been a long time since I was last here!
- LD PC-V10 115V USA Computer Case with Integrated Phase Change + Watercooling
- Looking for Canadian Phase guys, preferably in BC
- Single Stage Cooling, Is it in the way of death?
- Rotary SS in black case
- How to bend 1/2 copper?
- SS requires warming up to function properly
- What type/brand/model of compressor would you recommend for a MTBF of 50K hrs
- Question about PROPANE....
- Newbie Question on "BYO Phase Change PC Cooling System" guide
- Is this a decent vacuum pump?
- Prommy Mach 2 help to find 1155 SB adapters
- 3 stage cascade, need 3 compressors with 10:1 ratios. (R14 compressor)
- Socal Builders?
- New single-stager for Moonman's 2600K
- Anyone here have a United Refrigeration Login ID? (Don't want yours just a question)
- Danfoss NL11F : Clunks? Refigerant movement?
- jin unit phasechange singlestage need a little pro help....
- Recharging Help
- Big 2 stage cascade by piotres (2x 2+HP)
- Newb, First time Phase cooling, Advice needed.
- aspera T2168GK
- Three-stages cascade [ designing ]
- Belgian first Cascade !
- Compressor wiring
- Custom Single-Stager with Alu casing
- Shelf life Oil Separator
- Condinsation possibe problem please guide me a little
- Should I buy this compressor
- Broken SS advice, possibly ceased compressor?
- Rotary Oil changing
- sat around, doesn't pull very far down.
- R507 r407 ss phasechange question
- Ss unit by jin- when i start up main unit sometimes i hear jitter noise........
- Cased Single Stage
- Oil Separator outlet design question
- Temprite 340 oil separators for sale
- runmc. . .
- Mach 2 GT Rebuild Worthwhile?
- Need help with Software!
- Quick load temp question
- How is my unit performing?
- Where to buy a new controller
- Fuse keeps blowing on SS
- Compact Cascade
- CryoBUG is Back
- my first ss build, slow progress!
- The -150c 'Cryo Challenge'
- A Merry Xmas to the guys of the Forum!
- 3 Stage -150c project by Gray
- Quad Head Dual Rotary Cooler Project
- Capillary tube length these days?
- Wasnt sure where to ask, Any of Yall have access to a Mill?
- Insulating GPU
- Compressor :banana::banana::banana::banana:
- new SS build!
- facebook group
- ISO Sdumper
- Who is active? US/Euro+Kayl
- DC12V power Supply
- Anyone Seen SDumper recently?
- Another Small Cascade (or 2)
- Estimate my captube size dear geniuses !!!
- help me to charge my SS via skype !!!!
- phase builder from Slovakia
- How much pressure is unsafe?
- A charging tutorial for n00bis !!!
- i7 920 target to 4700ghz
- Two stage cascade rework
- My Helium compressor
- Sticky change up and round up!
- R23 txv
- My first Evaporator Design :) 'The Daisy'
- DIY first time singlel stage
- Repairing of 3 Single-stages: Vapo LS, Mach 1 and LD unit . WORKLOG
- Phase Change cooling by oil
- Spring break upcoming!
- Under the Ice Single Stage picture guide
- LD PC-V2 Phase Change rev. 3.0
- Large 2-stage cascade
- Morphing AC into Autocascade (revisited)
- Guideline to estimate Refrigeration performance
- Plz Help Phase Change Insulation Questions
- Question about TDP and Heat x-fer
- I7 950 - how far can i go with SS ??
- 3-stage (4 compressor) cascade using Methane
- Under The Ice SS
- Best TIM to use with a single stage?
- My first AutoCascade -- building has begun
- Captube siziing
- Need help
- Looking for Refrigerant Grade R600a in USA
- My new 1.5hp R402a SS unit
- Building Again
- Our Second AutoCascade
- Pet peeve
- Strange Phase Change System Problem
- Looking for an evaporator
- Carzy pressure ss....
- Prometeia Mach II broken - need help fixing in the UK
- An interesting project (miniature SS)...
- Samsung rorary help
- Life without R-14
- Simple AutoCascade
- Dual Evaporator Single Stage Question
- Build Upgrade Which CPU Route?
- Phase change problems
- Post your OC !!!
- Type-K probes question
- Would somebody please ...
- SS dual evap CPU + GPU with orange pipes
- Cascade w/o EPA refridg.
- First project!
- Doing it again :) 2x 2.5HP cascade - worklog
- TEC Cooled Phase Change Conderser
- Lian Li Midi Tower with integrated Singlestage
- 1155 EVAP mount?
- Software for Dr. Frosty Freeze Controller Basic
- Building first vapor change; asking for some help.
- R409A in automotive applications?
- Is this unit over charged or faulty?
- First SS build
- Loadtester with ATMega
- My 4th Autocascascade
- Need a hold down and my normal supplier is out
- New Cascade System - Need Help With Design - PLEASE READ!!
- Vapochill + 1155
- Stepper rev. 2#
- oldskool vapochill LS and Asus gtx480
- R290 to CO2 ratio
- Prometeia Mach 2 GT MODDED
- [FREE][Socal] Any socal builders around?
- ss phase change question....
- Using your pool as a heat exchanger
- Cascade compressor size question
- Copeland and r1150
- Cascade: Refrigerant blending and Oil Management
- 3rd stage cascade system Filter-Drier Location
- SS Build
- ss phase change question....
- Vapochill LCD Temp display
- Modifying a new small chest freezer to go down from -20C to -40C
- standard 2-stage cascade cycle modeled
- -125C all hydrocarbon autocascade cycle
- Is my compressor damaged?