- How to insulate for 24/7 phase
- Mach 2, rebuild?
- Powerful retail units available?
- What would it take to build a cryogenic cooler?
- Tt water block to evaporator conversion
- 5 Compressors - What to do
- Single-stage auto-cascade build
- What can be done with this monster?
- help me fix this condensor
- Mach 2 GT error codes?
- Need your help with tuning
- Attempt at Vapochill ls i7 head kit
- Nylon braid
- R600 PT chart needed
- Condenser sizing
- About to charge r290 ss system
- Kryotech in action
- really random question
- compressor getting red hot?
- First watercooled SS by piotres
- POE Oil + R-402A !
- Electric Solenoid Switch gas bypass...
- LGA 775 Cooling
- Henry 5181 Helical Oil Sep
- 1156 mount needed
- Dual cap or TXV
- 2 Stage Cascade
- Autocascade.... 'DaBomb'.
- Thermal cutoff switch
- Johnstone and URI accounts
- I7 + Phase
- Airgas lolz for the crowd
- Maneurop and use in a build, casacde/auto c
- The Storks...
- Evaporator Performance
- Variac w2m
- My practise SS
- Swiftech Apogee GTZ Evap Conversion?
- Help Choosing SS
- Little Chilling project.
- Jabsales.eu legit?
- 3 way solenoid
- cascade
- Building My First SS Unit.
- Which compressor
- Delux condenser & 12K BTU Rotary
- How good do single stagers get?
- Building a loaddummy
- Wip : Single stage
- Rotary comp base mount - MODABLE?
- [Help] TXV & CPEV sugestion
- Replacement gas
- White cascade with bypass
- Vapochill XE repair - UK
- I have some noob questions with regard to phase
- Question to overclockers ... (54mm evap would fit ?)
- How To Charge R507 and Other Refrigerants
- My phase change by kc
- Adding another stage to a S.S.
- Maximum overclock @ -50C stable
- vacuum in heat pipe system
- Information about Vapor Phase Change Cooling units
- Question's on Scroll Compressor's
- 3 phase rotaries connection ?
- Phase change hasn't been turned on in years...
- Plate HX presure reading
- Gas blends - not seen this in a sticky so asking
- Operation window unit.."my cheap skate phase build"...((56K Murder))
- Thanks Duniek
- cap tube length for 410a
- Ss cooling =)
- Single Stage Phase - Improvments
- Tecumseh Question
- Flexy pipe to replace Captube/Pressure Couplers
- Size of Oil Sep
- R14 Price Tag Shock....
- poked hole in condenser on jinu117 SS
- Compressor starting
- Blame Tiborrr My 12,000 BTU Cascade
- Refilling R600a fridge (Urgent).
- Evap for Pentium IV
- First Single Stage Build
- 20 plate versus 30 to 35 HX
- New Vacuum Pump - need your advice
- Phase Change Cooling Questions
- Another 2 stage cascade
- Suction line ID
- Latest Build
- Anyone know where to buy kits for Prometeia Mach I
- Anyone need compressors and stuff?
- Bench Singlestage 300watts @ -40°C
- Drier Filter ?
- Re Flare or loctite
- Silencing A Prometeia Mach II GT + n00b question
- Question about captube lenght
- New Build Start
- Phase change by kc
- whats a good place to buy temp moniters
- Help: Solid State Relay for Solenoid
- So, I'm sort of back! Only when I need a favor. :P
- 8 core CPU's
- Phase hall of fame
- Thermal Insulation material
- Isceon™ Mo89
- Robinair 17650
- r14
- Will it fit v2.0 - Xtreme Kryo Off-Road in a Vette
- Source for thermocouples
- Cap, TXV or CPEV
- First time using SS unit
- The wife thinks i am crazy
- Need an ''constant'' load on my cascade
- Problems with new build!
- Casemod in progress - Vapochill XE Mobile
- Capillary and valve
- help with use of r507 r404a and r410a
- Load tester material
- Commercial -150C
- SS Temp Monitoring I7 920 ( not holding heatload )
- Oil Separator
- OCZ Cryo-Z - leading a lamb to the slaughter
- My first single stage
- Will a straight acetylene torch work for phase?
- A final few concerns
- Bump Testing
- Artic silver ok?
- Wiring error (?) Good news and bad news.
- annoying moisture problem
- Change the way i monitor temps or not?
- Portable benching SS (rotary)
- Condenser fan wiring problem
- Argon/CO2 welding tank as an expansion tank
- Brass snaprings
- Is this a good compressor for a SS?
- help possibly salvaging a DIY phase
- Blockage Correction What would you do...
- mounting problem
- Mach 2 BIOS temps
- TEV Question
- Vapochill XE Chill control issue
- Clean Dielectric Grease off CPU?
- Phase problem
- Vapochill LS LGA 1366 Socket Kit?
- Happy happy joy joy, Condenser love
- Ordinary Rotary Bencher
- another cascade (help with packless valve)
- Cascade Controller
- Where do you guys put your phase change units?
- Salvaging evap guide
- Impact of temperature glide of 2k
- 3 Stage Cascade - Rebuild, Modification Thread
- A Few ?'s (SingleStage)
- Mach II GT 1366 Mounting Kit
- 1 hp 110v reciprocating
- Miscelaneous Refrigeration Q&A thread
- Time well spent, online video guides
- Good Subzero Intel Board?
- Electrical Tool Question
- CPEV + bypass - will this work fine ?
- liquid submerged computer
- Easy Single Stage DIY Guide?
- TEC cooled condenser?
- nickelplated evap
- How do I tell what oil a compressor has in it?
- Mach 2 GT mods?
- Where to find a Phase Sperarator?
- Little Devil Unit, a year after
- upgrade rg5000 to RG5410?
- One more benching SS
- Measuring energy removed from refrigerant in condenser? + other Qs
- 1/4HP Rotary Compressor Prospects
- Txv
- cannot find part
- Single Stage - Specs & Appraisal
- Auto C and Cascade Designs
- Safety Question- Oxygen Regulator
- So I have this old system...
- liquid cooled phase change?
- ocz phase cooler mods?
- Quick brazing question
- Happy xmas all
- Wiring help (PLEASE!)
- Playing with some fans and my phase
- Tired Mach 1 prommie needs help!
- Cga660
- Freeze Pack controller issue
- Refrigerant Scale?
- Single stage rotary unit
- Troubleshooting Compressor start issues
- Correct Regulator for Co2 purging/P-Testing?
- What case to house an internal phase unit in?!
- Who is this fellow :) lmao
- Base Mount, MDF okay?
- finished first ss phase unit
- what is this?
- Tube in Tube Hx + SLHX ?'s
- Is my insulation to blame?
- Oil back line in cascade
- 220v receptical
- My First AutoCascade build w/ pics
- UPS some how busted my ruffus SS Unit, now what?! (pics and video)
- Second SS by Kamil Grzbiecik
- How to test a compressor
- Totally and completely off topic but. . .
- Single Stage Rotary :banana::banana::banana::banana: shots (21 or older please)
- Any tips for polishing copper tubing
- filter dryer
- Evap head kits
- Guide: Brazing a Braided Flex Line
- Dummy load
- Rotary cascade worklog (56K warning !!!)
- Any reccomendations on what I should do with this?
- R507 in small quantities
- Vapo LS and load
- The motion of the ocean; small reciprocating
- SS temps question
- any local builder for atlanta GA?
- Vapo LS Evap cap routing
- Mach 1 evap question
- New Build
- LINK to CPEV
- Letting Vapo LS settle?
- Chilly1 custom lineset
- help with cascade
- Asetek VapoChill LightSpeed
- Single Stage System-Senior Project
- Which gases goes for a extremely low temp, (-120+)
- Temp sensor wiring question
- Few Question About SS Cooling
- Simple 2 stage cascade
- Did anybody from this forum...
- Calling SDumper LS-1 Temp Questions
- Another evap question
- I think I need to refill my compressor
- Mach II upgrade
- Cost of a cascade system?
- CPEV question
- My first Single Stage rotary unit (worklog)
- Another cascade
- Repairing a rotary...
- Temperature + humidity control chamber?
- MAPP users my hats off to yaa
- Horizontal Condenser?
- watts Gulftown vs i7?
- Cryo-z
- Phase Change and Water Chiller Hybrid?
- LittleDevil rotary SS testing and impressions
- Exploding ball valves
- Is the company that makes the Prometeia Phase Change still in business?
- running ss 24/7. advice needed