- What's a good k type thermocouple?
- How to tell if cap tube is too long/short?
- Evocade rev 2
- R290+R744 mix possible?
- DM Cascade. My first Unit...
- Cooler Express 2007
- Load Tester
- VARIAC for Idiots :)
- Who can vouch for COOLER EXPRESS INTERNATIONAL TECHNOLOGY CO., LTD.?
- EvOchill rev2
- Converting an AC to phase
- Stage One: Autocascade Adventures!
- Gfroster 2.1 Value Temperature probe information
- Some Cascade Parts need input
- Thoughts on Subcooler
- 5 Stage Cascade Made in Germany !
- R408a
- R507
- So I got a vapochill LS: trying to use on my i7-920
- R410a not a good choice?
- Prometeia Mach II GT
- parts to use a nventiv mach 1 on lga775
- Variac for Idiot Part 2
- Recommendation for Cascade Controller
- Vapochill LS Stop working :( need help.
- condenser conversion benefits
- help with reg for r1150
- Average Compressor life
- Cold plate + 2 mach 1's
- How long to wait for an upside down Single Stage?
- Finished cascade 3.0
- Help planning a SS build
- The Rebirthed Cascade
- Expansion Valve Orifice choice
- Mach II GT Controller Override
- Too big for SS?
- Ideal diametre for a cilly1 or steper evap???
- 24/7 Phase
- Identify Cooling Head For New Nehalem Mount
- Hows This?
- SS i7 Bencher
- Accumulator design
- WTF is Going On
- Repairing Manifold Hoses?
- R11 Refrigerant Replacement ??
- Thought you guys would like this
- Autocascade guestions.
- Variable Frequency (Inverter) Drive
- Playing with a Maze 3 evap with lexan top.
- New 1/2hgp AEV System
- Phase Noob
- Mach II GT Controller Help
- low budget cascade
- I am Xtreme - upgraded XS access
- oil separator return rate
- Alternative to brazing?
- Another SS
- Trying to find refrigeration design software
- modding a receiver into a expansion tank
- I would like to add phase change cooling ...
- Phase seperator
- Fan shroud
- New to phase change
- increasing cfm/mufflers
- How do you attach a new mount?
- Vapochill LS - Loudness/power consumption at lower settings
- how to test is compressor still alive?
- Powdercoating of compressor - does it OK ?
- Broke The Evaporator Line: Great, Now WTF...
- Mach2 Delima
- help with a tev on a cascade
- Insulation
- Back to phase change . . .at least for a while
- EEV Electronic expansion valve
- Vapochill LS LCD Display Error
- Modding Immerson Cooler
- My first phase-change unit - help needed
- Anyone try SS on a Core i7?
- Smaller SS build
- SystemViper from IGLOO to PHASE, a change of seasons
- Prometeia Mach 1 Mod - WORKLOG
- Can Any One Explain This To Me
- Not off to a good start
- ARZOLA AIR CONDITIONING svcs??
- Questions on Superheat
- Triple Head Load Tester
- Brazing and build questions
- R507 vs. R404a
- Advice on a custom cooler
- What the heck happened to the database?
- How has everybody been doing?
- Chiller/Cascada Question
- Temperature control
- Low Budget Cascade help
- What's the best way to make bypass to regulate temperature in 2nd stage ?
- AIRCHILLER + Single-stage (worklog)
- Vacuum pumps
- Must read for anyone interested in phase change cooling
- Research for a project help
- Danfoss TFS45.CLX
- Danfoss KP15 mounting dilema ...
- Another builder returning to the front...
- Prebuilt i7 phase changers?
- Selecting an Accumulator
- Looking for Detroit :)
- Prometeia Intel socket 1366 EasyMod CPU Kit
- Brazing information
- Where to buy parts???
- Autocascade - project only ATM
- Condenser Envy
- New GPU SS in Mach I chassis
- Standard Wire Gauge (SWG)
- My 2nd mini-cascade - 2x MP14 FB
- Problem with cap tube?
- SoCal Builders?
- Ouch didnt notice the displacement
- Schrader Valve temperature Sensors - K type???
- Sourcing 28k BTU Rotary Comp
- Vapochill LS modding and questions ?
- 3/4HP horizontal compressors
- Vapochill LS/ Mach II GT / 775 questions
- 208/230v help....
- Vapo LS
- Cap Tube Help
- Ceramique still best?
- Silly Putty Used to Fight Phase Condensation
- New toys courtesy of the military
- CPEV Usage
- Cooler Express 2009
- Capillary Tube to TXV Modification...
- F1 Ln2 pot conversion to Evaporator
- R600a & R404a - Safe too mix
- might have a problem
- Quick Phase Questions
- Captube frost before evap.
- Specs for this rotary
- Decent $300 phase cooling for HAF932 case possible?
- Frustrated with a Repair :(
- Cryo-z temps/ I wonder about it....-70
- copper solder
- would it be possible to squeeze a SS in here?
- Accumulator buy vs build
- Charging Question... SS-Stacker up and running
- How quiet can they go?
- PT100 probe - Can I make wires longer ?
- Problem with big cascade :(- need Your help !
- Xtreme Phase Change Insulation Guide
- Trying to salvage EVAP
- Old Friend is giving me a Promethia Mach 1. Any use for it?
- Cascade condenser?
- Where To Find???
- Best gas to mix - Raise BP of R1150
- English Phase Change Builders?
- Voltcraft software??
- New evap
- water chiller to vapochiller
- Ln2 and real temp
- The EVOCADE strikes back!!
- Dismantling window AC for phase use?
- Quick Question
- what is necessary to replace a SS suction line?
- Need help on first-time phase unit
- Vacuum Pump for around £100 ?
- single stage
- R1150 Help
- Liquid frostbyte makes its return to service
- Plasticine For Insulation
- Heatpipes...
- Cold Blast from the Past
- Help Understanding Temps
- Pre-built "Chillers"
- Which Components.....?
- Floated Oil Sep
- Brazing using a TIG welder and other TIG questions
- R507 on Ebay.
- Want something better
- Worth updating for Nehalem?
- Did I kill my compressor?
- r508b???
- Build for Paul...
- Will this mounting head work for i7?
- Filling A/C in car
- condensation and voltages
- 2 - stage cascade by sdumper
- When's it likely to stop working ?
- Prometeia Mach 1 Capillary tube length
- Danfoss TUA Expansion Valve
- Propane Tank as a recovery tank?
- No Compressor Electricals, What Can I Do?
- LG Electronics QK141CCD
- Pictures and ideas
- 8Kw Compressor
- compressor wont start anymore?
- Would this work?
- Leak detecting solution
- local supply stores wont sell to me!?
- Question about insulation materials
- Cheap Way To Mount To 939
- pinhole leaks in evap?
- R12- R134A retrofit question
- Reciever Use
- Stage 1 Phase Build in TJ07
- Tuning modded Vapo LS
- Simply Ridiculous Cascade
- Condensation and CPU death
- Alternative to R508
- phase ideas and questions
- Where do you guys in The States get your condensers??
- Snap ring size for chilly1 head
- How to make Simple Phase change cooling?
- Grease or No Grease
- Is 1Ph going to be a problem for me?
- will this compresor work as my cpu cooler...
- problematic rotory compressor
- So I understand what parts I need, but what about the specs?
- Sdumpers 3 stager
- Using Flammable refrigerants in Small Systems: Europe vs. USA
- The outdoorcade
- Suggestions for salvage
- Any way to adapt Mach 2 for LGA1366??
- Compressor spec check please
- Best Material For a base?
- Frosty Postal Rev.2
- Eliwell ID974 ok for Temperature monitoring?
- Danfoss SC18CLX.2
- Desperate to find a NF11FX 220V to finally start my build
- New Toys
- Maneurop MT40 reciprocating compressors on Ebay UK CHEAP!!
- Dual Head Single Stagers
- Ordinary cased SS
- AutoC plan
- Do common compressors have high enough pressure to run a vortex tube?
- Need help recovering and charging
- Build a Custom Air Conditioner
- 2 Compressors In A Single Stage?
- Uk equipment suppliers
- Server Case (Cold and Quiet)
- Build question
- How connect this compressor...?
- Are there any Socket F/940 evaporator blocks available?
- Substitute for R14
- Technical questions for you pros
- A few newb questions about phase building!
- Help needed with Vapo
- Scrolls and use in a casacde
- what are people cooling
- Normal?
- Cleaning plumber's goop out of CPU socket?
- Will this work for brazing??
- A couple questions