View Full Version : Liquid Cooling
- Direct contact watercooling!
- Possible to RMA a Watercooled Vid card?
- This guy wins the custom case award. Probably forever.
- What the best off-shelf fan controller that can handle 2 or more fans per channel?
- Need help with getting NB/SB blocks for EVGA X58 SLI LE
- ASUS P6T7 WS Supercomputer compatible NB/SB/MOS blocks?
- Temp question
- Best 360 rad under 48mm thick w/std 120mm fan hole spacing?
- Can't locate a GPU-X² 4870X2 LT
- GTX275 waterblocks
- Caldera Rev2 heatsink for ATI4870X2
- Custom Size Radgrill?
- cheapest place to buy compression fittings/water cooling parts
- Review: Quad Radiators + Bonus
- High idle temps?
- Review: Rampage II Extreme waterblocks: Bitspower vs. Koolance
- What pump should I take?
- temp and loop question
- My rad P3
- Not enough juice for i920/4890 crossfire/liquid?
- HK 3.0 @ Sidewinder
- What are your 4890 overclocks for reference?
- 920@stock=50C idle and 80C load
- Best performing dual DDC top...Alphacool Hardwareluxx top still the preferred top?
- MDPC on engadget :)
- Silver coil
- DDC2 With DDC3.25 Will they play nice?
- can the aquareo use a different display?
- The most important WC component - H20
- Corsair H50 Hydro vs Thermalright HR-01 Plus
- water cooling kit is this good or not
- Northbridge block doesn't fit, alternative mounting options?
- Bored with air, want to move to liquid but no idea where to start
- One Sexy Block
- Suggestions for this loop
- Which is The BEST performing CPU Water Block ??
- Need dimensions od XSPC ResTop on a MCP355
- what is the best HDD block for 3.5 bay?
- Broken Fins an issue?
- Noob Question about Temps
- Water cooled i7-920-D0@4.5Ghz nearly 80C is ok?
- At a loss on case choice
- MSI Eclipse Plus NB/SB/DrMOS full block?
- videocard/ pump loop question
- DDC pump oil?
- The Pressure Is On
- First WC Build - Parts List + A few questions
- Tokara IV - Compact Wooden Case build... In 1 month.
- DDC-1 and DDC3.1 in same loop ok?
- Back to water!
- NB/SB waterblock for Evga X58 SLI LE
- Single Res and tops for 2 DDCs?
- Fan won't run at full speed
- nickel plating, water jet cutting, etc...
- HK 3.0, up to what size tubing can fit?
- Need a solution for EVGA GTX285 (New PCB)
- Water mysteriously leaks out?
- A cheap cpu only build
- arrows on fan !
- Advice on Loop Design
- First watercooling build
- First WC and yes... Im anoying mode on
- Will there be any pressure drop when using Y-split?
- EVGA 295 single PCB waterblocks
- 140mm fan recomendations for WC radiator
- ATCS 840 vs. Cosmos S, a need to downsize
- Another Rad to the loop?
- Plan for 2nd loop. Sound good?
- Parts list thus far. Jul/1
- I finally ordered my parts!
- UV particles Dissapeared !!
- pRon 4 joo
- My water setup
- How to setup these loops
- Question about dual loops
- what would i need to keep all of this cool?
- Performance question
- Any radiators with fan spacing 20mm apart
- New GPU only Waterblock from Alphacool
- Eternal Thermochill Flushing
- who acquired Thermochill ?
- 9*120 rads performance
- Want to do a little watercooling upgrade
- Changing Aquagate max pump
- XSPC Razor 4850x2= 4 bricked cards.....
- What is wrong with my WC setup?
- Fear of not using coolant
- Not So Fantastic Plastic
- HK 3.0 LT (cleaning)
- which loop setup
- Reservoir for Laying D5
- Can I use this pump?
- Are noctua P12's okay?
- Whats the difference between the Thermochill HE120.3 and the?
- Another i7 + GPU liquid setup: is anything wrong?
- Mini worklog (will be part of a larger H20 project log)
- Watercooling Advice Needed
- Has Anyone tryed this to clean their blocks???
- D-plugs as drain ports
- A simple question on using the mcw60-4870/4890
- Very Slow Leak???
- Changing the wires of DDC pump.
- What are the best 120mm radiator fans?
- Different fans in push/pull. Any problems?
- Building a new rig, have a few questions.
- HELP me choose loop order
- Cleaning a partionally rusty radiator
- video of XSPC Dual 5.25" Bay - DDC Dual Pump Liquid Cooling Reservoir
- hey guys i need a little help!
- Koolance VID 4870x2 question.
- Is this normal noise for DDC 3.2?
- P3 Rad Thermallchill vs Feser X-Changer 360
- XSPC Res Top Warped?
- Advice on WC reservoir and pump?
- Thermochill PA 120.3 vs 120.4
- D5 #1 vs DDC 10w
- Alphacool HF 14 Yellowstone Review
- Question about compression fittings and water blocks
- What can a thermochill 120.2 run?
- Check my shopping list so far...
- peltier chiller, good idea?
- E.K Classified Block and E760
- GTS360 vertical mount - intake top or bottom?
- Plumbing for SLI/CF
- Does a MM triple Panel fit radi 15mm spacing?
- Core i7 Waterblocks, Roundup #1
- Koolance blocks and the GPU support frame
- Need Assistance /w 1st Time Build
- TFC Monsta = Leak
- need some advice on temp reduction
- Dual Loop vs Parallel Loop
- How many of you have tried a Heater core for your rad?
- best mobo+block for i7 build
- NB Block Compatibility
- New copper top for EK Supreme
- Two Loops, One radiator
- Need a NB Waterblock for ZOTAC GF9300-D-E
- skinneelabs TFC X-Changer 360 Radiator review
- Advice on what pump to buy?
- arg . . .some people really are ignorant
- Home made gpu water block
- Teflon tape, to use or not to use?
- Fittings Question
- Some Rad advice needed.
- Which is the best fan controller for my delta fans??please Help..
- Fuzion GFX 2 availability
- Feser UV vs Primochill Pro LRT red tubing
- Where is the Bottleneck
- Can anyone rate the primochill Typhoon III?
- New Fesser 120 x 55mm Fan
- Oh No I Cut My Pump Wire
- Best use for dual pumps?
- Piecing together first water setup? Help!
- i7 920 WC setup/advice
- Water Cooling Setup Questions
- heat problem on i7 950, cpu block issue?
- where can I find a EK
- High temps
- ASRock blocks?
- GTX260 core216 55nm heatsink?
- Question about 4890 water block.
- First Water Build - Need Advice
- let the cooling madness begin!
- How does Scythe SLIP STREAM perform on Rad?
- Is this normal?
- First WC - advice on components please
- Typhoon III & D5 -or- XSPC dual DDC pump res?
- Getting some new hardware
- New to liquid cooling
- Lapping GTX 295 IHS's
- EVGA GTX 285 Superclocked and EK-FC285 block question.
- SanAce 109R1212MH104 on eBay for 5 quid + delivery
- [Suggestion] About Feser X-Changer Quad 480 Extreme Performance Radiator
- Can anyone share some info on Fluid XP - Nano Fluid?
- Watercooling Fluid Shootout - Feser Beats Distilled by 2c?!
- Best 775 CPU block?
- X58 chipset blocks
- Chipset Block for a P5Q Deluxe ?
- Need Help Choosing Compression Fitting
- Feser Xchanger 240: Enough For Q9650+Gtx260 ?
- How to anchor 3x120 rad on the bottom of TJ07 case?
- Cheap Kill Coil Alternative
- Any way to measure water temps?
- Custom block - Spawn 1.0?
- Use BI GTS 240 or not?
- Ybris Eclipse Gpu Review
- As for tubing, what specs should I be looking for?
- 10c delta setup?
- What is in my bottle of fluid?! MONSTERS!
- Which liquid cooling system is best? core i7
- Good rad fan?!?
- Where to get red coils?
- Which fitting for this bend?
- WC Noob going i7...need expert assistance
- Suggestions for mounting a radiator in an Antec 1200?
- Watercool HEATKILLER CPU Rev3.0 754/939/AM2+
- Lots of fans, is watercooling needed for my MB?
- How to quiet down the pumps?
- EK-FC280 screw size?
- FuZion nozzles + i7?
- Thermal tape & Waterblock Question
- Alert to anyone requiring CNC machining (Routing, Milling, Lathe work)
- Ideas for getting rid of rust on Thermochill rads?
- Information Please: Surface Prep - The best way to sand a rad down to copper?
- large reservoir
- Temperature sensor for the CPU-350?
- The Arteries Of The Water World
- Will this work?
- is it possible to cool just the nb on the evga x58 vanilla?
- ati 4870 x2 cooling
- GPU Block Reviews
- Best way to clean out dust from rad?
- Info regarding Bitspower D-Plug needed, please
- Mips EVGA X58 SLI LE waterblocks
- Help with blocks and fittings for 4890 CrossfireX
- Taking new blocks apart to clean
- What pump to use
- Stainless Zip Ties - Will they work?
- Cooling solution poll.
- 3/8 ID 1/2 OD Tubing
- Primochill non Condutive Fluid....Anyone tryed it?
- Are my idle temps considered high for WC?
- need help on which ati cards can be water cooled
- DangerDen CrossSLI fitting help
- Koolance Pipe fittings
- HK3.0 flow distributor plate
- What mosfet water blocks for M3A32-MVP DELUXE?
- Silly question about Rad orientation/setup
- Best GPU Block For Me
- EK-FC295 GTX Single PCB - Released!
- WC antec mini p180
- Corsair Hydro Series H50 NEW REVIEW! Compared with CoolIt Domino and IFX-14
- EK-GTX 285 Rev.2 available at Sidewinders!
- How well does the X-res bleed?
- Watercooling for the eVGA Classified 760
- Best method to join the No Clamp/No Compression Fittings Club?
- Temp Monitor
- T3 fitting test
- feser monsta
- Where to get cheap Gold plating?
- Making some new loops, would like some input
- am2+am3
- Koolance VL-4 Quick Disconnects
- What is up with my temps?
- Antec 1200 LC Conversion
- Anti Vibration fan mounts + rads
- Trying to pick radiators.
- Pump output direct into the rad?
- koolance cu radiators any good?
- i7 temps high?