View Full Version : Liquid Cooling
- Mountain Mods 5.25" Bay dimensions (5 bays)
- How would you mount a Quad rad on the back of my case, do you buy a bracket ?
- ZM-F3 or S-Flex G
- Alphacool HF 14 Yellowstone @ performance-pcs
- Best bang/buck Northbridge block for Gigabyte DS3P P35 motherboard?
- How are magicool radiator in comparison to say swiftech radiators?
- Isopropyl Alchohol - Which one is the best?
- Quick question about MCW30 Barb compatibility
- 38mm vs 25mm fans
- Compression Fittings vs Straight Barbs?
- Best non-full cover GPU block
- Can a MCP350/XSPC Res Top handle these additions
- Rad temps versus CPU temps
- Can a Swiftech MicroRes be used on its side?
- Need specs on lost screw...
- What to stop T-drain line with?
- Compression Fittings help please
- Does orientation of the Fuzion V1/V2 matter on i7?
- Where to buy D12SL-12
- Bitspower Shining D plugs + MCR320 stackables
- Watercool MO-RA 2 vs XSPC RX360 Triple Radiator
- The SEX factor for 4870x2 Waterblock
- 4870x2 XSPC Razor Thermal Issue
- XSPC 4870 full coverage block
- Question about adding a second rad
- hear me out (passive?)
- Do I7 backplates clear the Stock one?
- Does no one have stock of Feser One X-120 TFC Xchanger?
- Benefits of Horizontal vs Vertical MB Tray?
- Watercooling on BBC TV :)
- Ordering panic! Need to decide, Aquaero or Mcubed!
- Skull Reservoir
- The new Koolance Controller, TMS-200!
- What compression fittings can i use for Masterkleer 7/16"ID 5/8"OD tubing?
- Feser 240 for i7 + GPU?
- Fan Adapter to support Radiator?
- AM3 water block?
- Common Virgin WC leak problems?
- Need some measurements on XSPC rx240
- Can small bubbles ruin pump?
- New i7 build WC thoughts
- Freestanding Cylinder Reservoir
- What is the take on Xspc crossflow radiators?
- Hmm... I think i've found where the sanyo denkis went...
- Lapping ! really worth it for me !
- Optimal drain and res placement
- What to cool trifire 4870/4890s?
- K, just picked up asus p6t, but need confirmation on ek block
- Fittings...
- New waterblock for gigabyte x58 UD5
- Does the MCP355 need active cooling?
- Mixing UV reactive oil into water cooling?
- evga x58 watercooling, worth it?
- Tools for PSU modding and sleeving
- Apogee (pre-GT) to GTZ
- The NAR res (diy)
- Do the new triple channel modules have temp sensors?
- Weird tube issue
- Eddy, get your chart straightened out (asus p6t mosfet screwup)
- Changing to 2x GTX285's in SLI - will my previous setup idea work?
- Zalman Reserator
- Where are all of the radiators?
- Is it normal that my MCP655 goes to sleep mode type deal
- Loop Testing Opinions and Advice
- UV adds: green shines but red doesn't
- Sucking in vs Blowing out
- 4879 FC Block Fit 4890?
- Temperature sensor
- Watercooling Torture Test Programs
- Fan PQ curve testing - Part 1
- how to get tubing off a barb? (possible without cutting?
- Abit compatible Mobo blocks?
- Vibration Dampening Material for EK D5 X-Top Rev. 2 Laing D5 Vario?
- Help me rank which parts to cool.
- How would you guys do this? CPU/GPU/Mosfets/etc
- High CPU tempertures??
- Thinking out loud
- RE chipset cooling
- Some questions before ordering!
- Air vs a Small WC Setup...
- 4870 Stock Fan vs my old x1900xtx's waterblock (maze5)? Which one's better?
- FrankenCool
- Check out this 1/2" barbed brass tee...
- Swiftech Stealth failed
- Enzo Compression Fittings
- NextWarehouse
- CPU temp vs water temp
- Quad rad not cooling? Should I "downgrade" to a tri-rad?
- What do you think of my loop setup?
- Does an EK-FC4850 fit a HD4870?
- Time to start down the slippery slope of computer modding - HELP!
- Fan controller help: no bay controllers
- TFC Xchanger Monsta Extreme 420/360
- Bloodrage Waterblocks?
- Arg . . . .it is Monday and I need a rig by Friday
- Coolant question
- which is better: Rheobus EXTREME or Lamptron FC-2
- CPU Waterblock question.
- Some questions, dual pump/rad etc.
- Which block for x4 Phenom II
- Chipset waterblock
- Primochill vs Feser: UV Blue Tubing
- Where do the plastic barbs go - mcp355?
- Will this setup overheat?
- Yate Loon vs. Scythe
- Torture rack extra tubing
- How high can you locate a Radiator ?
- PrimoFlex Pro LRT Tubing & Compression?
- Unisink for 285s?
- Where to get water in the UK?
- i7, 2 x MCR 220 overkill?
- Loop order
- 1366 920 water blocks
- pls delete
- Huge EVGA Fail!!!! GTX 295 Hydro "copper" mixes ALU and CU in the same BLOCK!
- Swiftech MCP350 + XSPC Res/top squeaks
- Anyone run a MCR320 Stack in Series yet?
- Help finding these thumb nuts
- i7 Poll and ek supreme lt question
- What's the best GTX 295 waterblock?
- What recession? Rads sold out everywhere...
- Hot Make Apps
- Asus Rampage II Extreme + Water
- Can my radiator handle CPU+GPU+GPU?
- Varying temps normal?
- Block for None-Ref 4870...
- nForce 730i block needed
- Single or dual loops...
- Koolance EXOS-2 results
- What are my options to color the water in my loop?
- R.O.G. led modification.
- Overtightening Compressions?
- Enzotech Compression Fittings
- BP AIX48NSF & Asus P5E?
- Laing DDC 3.2 (MCP 355) fails to start
- Swiftech MCW30 w/ non-leaking barbs
- EK DFI X38 Mosfet block:
- FINALLY, we were worried, now HAPPY!
- almost ready
- First time watercooling build [SFF]
- New to Water cooling- parts selection help
- My Antec 900 Finally Complete!!!
- Waterblocks for the DFI LP UT T3eH8
- Swiftech kit question
- TecnoFront HWD Bench Table/Case PleXiGlass Triple Radiator
- new parts for water cooling
- Question on Koolance pmp400
- Fuzion V2 Nozzles Compared - Core 2 Duo
- wc options: i7 + 280sli + chipset
- i7 - radiator size ?
- Water cooling - GTX295's in Quad-SLi - How to run tubing?
- Frozen.Q T-Virus Reservoir Thread
- Advice on how to setup loop in TJ07
- 1080 radiator sufficient for this?
- Nickel Plating trial and error..
- Aquatuning WC kits?
- which blocks are compatable with the NB & mosfets of UD3R
- 5-Way Swiveling Splitter / Manifold
- suggestions for covering 'bare fans'
- PMP-400 (DDC 3.25) High Pitched Whine
- f5/mcp655 problem (metal base cracked)
- ddc pump question
- Final thoughts on watercooling setup
- Fans for PA120.3
- Full cover blocks for GTX275
- TJ07 Idea - Novel or Clever ?
- Question about what unisink would fit a GTS250
- Moving my rad to the basement
- Need advice on my selections!
- EVGA X58 Hydro Copper Waterblock
- 2xhd4870's on a MCR220
- modify a Vidcard
- Need some help
- What type of thermocouples can you use with the T-Balancer?
- how can i hang a radiator + radbox off the rear my HAf932 w/ the stock 140mm fan
- Parallel GPU Blocks and temps simple test
- Ok, 2xMCR220, 3xmcr220, or 2xmcr320 for i7 and motherboard
- H20-220 Compact on 1366? Anyone!?
- Heatkiller HK3 nickel plated
- Thermaltake ProWater 850i - Need Help WC Noob :P
- Help! - Need a Quick Recommendation for 775 CPU/NB
- Koolance VID-295 with 1/2 ID BP shinys (Pics)
- Nickel plating the HK 3.0
- Filter Fan grills ( try 3, yay forums!)
- Noob Questions..........
- where can i mout a 2nd triple rad in HAD932?
- where can i mount a 2nd triple rad in HAF932?
- Will this Koolance VID-NX285 block definitely fit my EVGA GTX 285? *IMPORTANT UPDATE*
- What fans ?
- Proper orientation of Heatkiller 3.0 on Core i7?
- Help finetuning block choices!
- maybe a dumb question about pumps in series
- Question about High ratio, high quality shrink/braid
- tubes
- Watercooling load tester - Help
- Two pumps needed for Koolance 350-AT in a CPU-only loop?
- mcubed fanamp do jumpers...
- Extending power button cables?
- New CPU Waterblocks from Zern.at
- Waterproof Silicon Glue Recommendation
- best i7 block?
- Need help. Yate Loon high speed fans.
- Which Radatior ??
- Water Temp Equipment
- Torture rack finished
- BIX 240 rad enough for i7
- Advice on single loop CPU water cooling parts
- Part list
- Best way to mount two Aquatubes in one V2100?
- Quad-SLi GTX295 WC, core i7 - stuck and need XS help!
- Opinions Sought: Final Loop Adjustments Before Filling
- Swiftech Gtx285 Heatsink Released
- Best Red UV Coolant?
- Laser cutting
- Fan recomendations for monsta radiator
- Heatkiller 3.0: Annoying rattle
- Direct-IHS water cooling an i7
- Fans for My Rads
- Adding a drain for each loop - not sure how to go about it :P
- Black tubing and bubbles
- Just found these hose Clamps
- REVIEW: Alphacool Cape Cyclone 38 HF 150 Reservoir
- For the Benefit of Those Who Want to do Back To Back Video Cards
- Horizontal versus Vertical Motherboard Poll
- Best Bay Fan Controller
- MCP655 pump bases
- water cooling amb temps
- Koolance 4870x2 block
- Dual 120mm rad enough?
- Petrashop Watercooling Kit
- where can i get cheap fan shrouds?
- Hondacity's HeatKillers GTX285 in Triple Sli (simple test)
- Best way to setup loop
- Quick questions about my i7 loop
- D-Tek FuZion GFX 2, O-ring BAD. =(
- New Swiftech eurostyle short barb fittings for SLI etc..
- Is my pump new?
- Modding the OCZ Hydroflow for Core i7
- Two radiators for Core i7?
- XSPC RES. Al res. will it cuase corrosion?
- pls help! with my new WC set up
- Question about blackops 775 NB waterblock!
- Koolance 350 - Acetal or Acrylic?
- Getting new tubing and Comp Fittings? But what size?
- quick question re: EK backplate
- The head pressure (in feet) of the DDC 3.2 XSPC res+top?
- Considering GTX 295 Water Cooling Setup (GPU Only)
- would it hurt flow installing these....
- [Review] Enzotech Phoenix (is a prototype and not the final release)
- Koolance 345 or 350?