View Full Version : Liquid Cooling
- Very strange problem in the loop!
- Is this too tight a tube bend?
- Help me setup a ram waterblock test
- Swiftech MCR320 from FrozenCPU
- Lets talk about my loop order
- First build Temp questions
- First time water cooling. please help
- what is the best contact paste to put on CPU?
- Does primochill kill algae in liquid system?
- 4870 with a maze4/5 or a swiftech mcw60
- upside down ddc?
- TFC XChanger 480 has arrived!!
- My Laing DDC-3.2 is dead
- Bleeding question
- Assemble Apogee GTX
- What do you think of these clips?
- Just Need Some Advice On My First Watercooled Setup.
- Whats the longest you went without cleaning your loop?
- Help needed on XFX 9800GTX abd DangerDen waterblock
- tj10 dual rads?
- compression fittings
- PDXLAN pIx . . .liquid-cooled sweetness
- Buy compression fittings bp, or dd 3/8id 5/8 od in europe
- Bitspower's New Vga Waterblock and "Aqua Sink"
- What's up with Clearflex 60
- Do you use shims on your nb-sb?
- Can't find a WC thread.
- 8800 Gtx
- Where can i buy a high end watercooled gaming rig?
- Stupid Check
- Sanyo Denki 109R1212H1011 Fan
- Lian Li top cover for radiators
- TJ07 Size?
- [CPU&VGA ]Need help with 2 blocks
- Home Casting Polycarbonate for W/C Projects (by popular demand)
- Fluid XP+ Vortex XP VS. D-TEK FuZion v2
- Swiftech MCW60 and G92 cards
- Bleeding: What am I doing wrong?
- noob question about mcw60 barb
- How do you guys join fans?
- Air cooling vs Liquid cooling Q
- Anodizing vs powder coating
- how do clean loop first time?
- How do you rig a PSU to work without a MB for leak testing?
- Tapping a DD Fillport Reservoir
- DD MC-TDX Intel 775
- New Block from Bitspower
- Water Cooling stores in Milan and Paris?
- Calling any Heatkiller 8800GTS/GTX Owners!!
- Reservoir question
- Bent mounting plate on my Fusion?
- Ybris ACS-G : new gpu waterblock
- Thermalright Mosfet cooler vs Waterblocks?
- does ATi support aftermarket heatsinks?
- watercooling bits ????????
- Quick Disconnects?
- Anyone watercooling and using an IP35-E?
- Petra's Tech Shop: Compression Fittings
- red line antifreeze
- BP Comp fittings on EK-D5 X-TOP-pix
- Which would be the more effective loop with 2 pumps?
- Help on a dual loop setup.
- How long does it take to install water cooling
- Series vs Parallel Cooling Loops
- corsair 1000HX + Xchanger 240
- Swiftech MCRES-MICRO
- washer mod?
- Where to put Pump
- Doesn't Distilled+Nuke = conductive water?
- New Watercooling. This temps are good?
- Getting REAL Distilled water in the US?
- The solution to all fears...
- Any advice is helpful for my first w/c project.
- EVGA Hydro 16 Copper Waterblock Package
- 9800 Gx2 cooling
- Iwaki MD-20 vs RD-30
- Some changes in watercooling - advice needed
- Barbs for the PA 120.3
- Is the UV color dye sold in a liquid bottle ?
- Different side ID tubing in 1 loop?
- For those that have G1/8 blocks/resevoirs and want 1/4" barbs
- Ybris ACS Black Pearl CPU waterblock...opinions needed
- Algae or stuff from the rad?
- help with cpu block!
- The "I learned this from others mistakes" thread
- MCR320 to GTX480
- D5 Pump Top Options
- Advice Needed for First Time W/C
- Is it ever better to NOT bow a CPU block?
- Help! Experts.. Nothing Seems To Fit
- "Group Buy" part 2*
- EK FC 4870 block & VRM cooling
- Will tubing make a difference in flow if the inlets on blocks are small?
- anyone use anticorrosion stuff in loop?
- Cloudy water
- Parallel Loops - Same Radiator/Pump: opinions?
- First Boot - XS Thanks!
- DB mod vid
- GTX280 Tri-SLI on 790i Ultra
- Error post
- Best mosfet/NB water block for a P45 Biostar?
- The absolutely right way to mount apogee to AM2 socket
- Drain line, who has one?
- Review: Coolants!
- watercooling gone bad
- Another One! Feser Xchanger 480 Finally Arrived!
- First wc run questions
- W/C custom case best? Vert. OR Horizonal MoBo
- Thermochill rad grill size?
- What is a good MOSFET cooler for a P45 Neo3-FR?
- Excel Experiment Radiator Estimator
- MCW60 with metal barbs?
- Some WC questions
- Bitspower rad support
- Acid Green coolant help
- Coolant dyes
- Filling the system up, help
- High watercooling temp?
- Decisions decisions cpu block
- tubing question
- Thermalright XWB-01 - Question
- Need help on Big Water 735 + q6600 g0
- Loop 90% Done. Thanks XS! Now to get the last 10%...
- Question?
- 790i SB block question
- What happened to my GPU Block??!
- Current WCer, New System and Setup
- Overclocked Q9450 + Stock HD4870 with 120.2???
- Presenting teh Danger Den Das Boot block
- What Colours should I use?
- Tfc
- mcp355 wires (hot,gnd,netrual)?
- Using Bitspower X-Station to power rad fans?
- Bfgegtx2801024h2ocwe?
- Updated Guide to Watercooling Components
- TJ07 help please
- PrimoFlex PRO LRT tubing, Antimicrobial?
- EK vs XSPC ?!?!
- Any thermalrights or other mosfet blocks fit 780i part 2?
- Water cooling business servers?
- Whats the worst that could happen?
- Rheobus Extreme - Some installation help please
- Thermaltake failures, need pictures of cracked acrylic tops.
- Selecting the right parts
- Radiator modification???
- Modifying the Swiftech Apogee Drive baseplate
- "Performance" loss with 1/4" tubing???
- Which type of heat sensor would have the least impact on flow?
- Additive
- EVGA 780i MOBO cooling
- Thermal sensor cable- waterproof ?
- Found my new pump
- Help with sleeving
- Fuzion GFX v2, ramsinks and 3/4OD compression fittings
- mod to get more flow?
- Is Koolance QDC (High Flow) Restrictive?
- Primochill Pro tubing
- Tottaly new to watercooling, Help me build a watercooling setup.
- Do you think this is too restrictive?
- D-tek GFX 2 Defective Unisink? (GT200 'sink) - [No]
- 7/16" ID on 1/2" Barbs
- Water cooling for 9800gtx+
- anyone tried 140mm fans on 120mm rad?
- What do you guys think of this 90degree 3/8 barb..
- Need Advice
- Are my BP fittings genuine?
- How do you know?
- Can a PA120.3 handle all of this?
- ? about Feser Base Corrosion Blocker 50ml
- Opaque white additive
- D-Tek V2 screws.
- resevoir mounting cosmos s help
- Need help, will it fit on Striker Extreme, EK-NB/SB ASUS 1 Acetal/Delrin
- PPCs, Sidewinder, USPS and Canada
- Will my loop handle this?
- New Watercooling loop...a question or two
- Where buy 280GTX full block in Europe??
- Newbie to Watercooling, requesting assistance.
- Which CPU Block?
- Anybody know anything about..
- Compression fitting
- TFC Xchanger 480 - Crap quality!!!
- Pump(s) needed for a 120.4 setup?
- Water cooling loop help
- CPC QuickDisconnects
- Bought the wrong tubing Doh!
- Cooling 3-GTX 280s & Cpu
- Can this be done to my Exos-AI
- IN & OUT EK Waterblock 3870X2
- D-Tek FuZion GFX GPU Waterblock with D-Tek GFX 2 UNI-Sink (nVidia GTX280/260)
- Are these temps too high for my set up?
- Building a water Keg type system for 2nd loop
- New made in Italy gpu block: Ybris ACS-G
- Theoretical Question on WC & Multiple Reservoirs
- 3870 FC on 4850
- It's a tight fit, but I got 3 radiators in the bottom of the v2000/tagan
- Wanted: GTX280 nacked backside closeup!
- Buying watercooling, need confirmation on parts..:)
- Water Cooling Advice
- Alarm / moniter for pumps?
- First time water cooling rig finished!
- what water blocks for Tpower i45?
- Swiftech MCP355 ?
- What about this?
- First time build, I'd just like some confirmation on parts.
- blocks for the msi k9a2 platinum?
- 2x120.1 Radiator Setup Q&A
- DD Maze5 GPU mounting hardware?
- what series of bits should I use to drill 1/4" bspp and 5mm leds
- Ek-ddc X-top G-3/8
- Water Cooling Design.....Plz Advice!!!!
- Tygon B-44-4X
- MSI Hydrogen-Set X48/X38 - SICK or What?
- 1 PA120.3 vs 2 MCR320 in PUSH/PUSH?
- 2 rads stuck together?
- mcr320 3/8 vs 1/4
- Dual DDC3.2 vs single and general design considerations
- TJ09 Temp Problems!
- TFC Xtender - Radiator Shroud 120
- mCubed Monitoring: Flow and Temp?
- Why is there condensation in my res?
- Next Step Advice
- Fuzion V2 q/ quad insert more restrictive than ...?
- PA160 + PA120.3 = overkill (in a good way)
- Water-Cooling CPU Block & General advice
- Recycle a 8 year old wc setup bad or god id?
- Hmm... which pump on which loop
- Laing MCP355 have enough power
- Question on Effiency
- Martinm210 Retiring?
- ARRRGGH. How do I get rid of air bublbles?
- Looking for Single Aluminum Radiator
- Have you guys ever just thought of an ice-tray under the computer?
- quiet fans for a BIX III? (i know....i know....)
- D-TEK GFX2 - possibly defective flaw on threaded back plate?
- relay for Iwaki
- Tired of plasticizer leaching
- what do you guy think of my loop
- Swiftech MCR220 Testing Results + Estimator
- TJ-07 dual loop help...
- Enough Rad Power ?
- How do you know if its Brass or Aluminum?
- Q6600 + HD4870 on a 120.1 Rad???
- 3/8ID - 1/2OD vs 5/8OD Comp fittings and other questions
- Will these barbs be ok on PA 120.3 with shroud
- Compression Fittings: How Much Pressure Can They Withstand?
- How are your rads mounted on the outside?
- Ultimate noob question. Is there a real input/ouput on radiators?
- where to locate 3 thermal sensor in my loop ?
- D-tek Fv2 and AMD ?