View Full Version : Liquid Cooling
- XSPC Edge Acrylic CPU Block Preview
- Small D-Tek FuZion V1 vs. V2 Comparison/Review
- How many blocks on one loop?
- Feser Results???
- Q's about coolant
- Mixing blk tube and clear tube
- Where's newls1, maker of the WaterKeg?
- Recomendations for waterblocks
- Fuzion V2 base is not the same as V1
- What is up with Thermochill?
- quick question
- Behold the Rats Nest!
- Am i hot
- Chipset cooling P35
- This is taking bleedin' ages
- Have I surpassed what my WC loop can handle?
- Pumps from Alphacoola and XSPC
- Cooling the 9800GX2?
- Will EK Supreme Fit DFI LANPARTY DK X48 ?
- MCR320 & TFC Xchanger360 fan spacing
- My work in progress.
- Ek 9800GX2 block
- Water cooling my 780i
- Any way to get rid of slight red tint leftover from previous build?
- 480 GTX Radgrill?
- good first time budget setup?
- Feser View - Active UV Dye
- Steel fitting ok in loop?
- Swiftech HydrX Coolant is recommended ?
- Different Faces Of Bleeding(Bleeding made easy)
- My New Build
- New W/C Build, big leak.
- EK or Thermalright backplate ?
- white/clearish film on tygon
- Which would be more effective using 2 original DDC2 pumps.....
- Project: Black Talon (Initial Discovery)
- So... I'm doing w/c first time...
- Core Temp too high?
- D-Tek Fuzion V2, which nozzles to review?
- EK Supreme vs D-Tek Fuzion v2 (with Quad Plate)?
- Can I reuse all the Blocks
- Thermochill PA120.3 location on Stacker 831 ?
- Fuzion GPU fittings
- Mounting the Fuzion V2?
- what to use for my watercooling
- Ek Anti-Cyclone problem *solved*
- Overvolting AQ50z
- Fuzion Pro Mount In Stock US?
- Thermochill PA120.3 handle CPU&MOSFET&NB ?
- Maximus Extreme NB cooling
- First time WC setup help needed
- dream setup in kitchen leak test
- cheapest case to fit 3*120 and a 2*120 dual loop ?
- My watercooled Stacker 831 :) *worklog
- T-line with temp probe
- 2x Dual Rad Vs 1 triple ? help
- How do YOU bleed your top mount rad?
- Pre-bored 1/2"-compatible AquaTube (Where are these sold?)
- Question about pump placement in a different direction
- computer wont turn on
- D5 Orientation
- Bowed Blocks and Lapped CPU's
- Problem with EK 3870X2 + 3870 blocks
- very easy ? for you to answer about thermochill and fans to use with it.
- Sanso PDH-054
- Bitspower G 1/4" Temperature Sensor Stop Fitting
- Looking for an upgrade but I have questions.
- New to water...can get a custom kit cheap, will it work with my rig?
- Parts suggestion
- I don't believe I did that ?
- Proper Method Of Mounting Temp. Sensor Under a D-tek FuZion
- What is it with n00bz over at SLI forums
- Swiftech Apogee Drive mod transparent.
- Advice on Reducing Temps
- E8200 and ATI 3850 Crossfire WC setup - dual radiator needed?
- ~~Watercooled Rocketfish *Work Log*
- Fitting 2x pa120.3 Internallly
- please help me decide among 3 reservoirs
- A.C. Ryan Blackfire4 Kameleon (Special Edition) UV LEDFan - 120mm
- Single 120mm RAD sufficient for 9800GX2?
- D-tek Fuzion v2...
- How are Bitspower Bay Reservoirs?
- Would these fittings work? Confused about threading!
- Copper Elbows
- Order my Water Cooling Supplies, Did I Miss Anything
- Project : Feedenator 3
- OT: Good Lord! what is your excuse?...
- Ordering WC parts soon, Want to make sure this is ok =)
- t line and loop question
- T-Line from res?
- CM-690 Build Log
- Question on mounting pumps
- D-Tek Fuzion V2 full review posted
- cleaning out loop without taking it apart?
- D-Tek+All Nozzle kit Vs EK Supreme+Option Accelerate Plate Tested (56k Warning!)
- MCR320 vs Black Ice GT Stealth 360 X-FLOW
- Opinion on power supplies
- Crawlspace......?
- Anyone from the US order from Mips?
- GPU and chipset block compatibility
- Info : V1010 Liquid Cooled...
- MIPS 790i Reference blocks
- Reservoir bubbles problem...
- PA 120.3 for $21 shipped :)
- T.J Max in Coretemp
- two vs 4 cooling systems
- New to WC! Just ordered my kit!!!!!
- Difference between standard and x-flow BIE 360?
- pump advice
- Changes Made to Loop and Results
- Need some opinions with these options.
- Feser coolant, should I add dye?
- flow problem with 3/8?
- Nvidia 750i FTW
- Volcano Reservoir
- Feser Carribean Blue Tubing? Or not?
- Ek-fc88 Gt/gts - No Gasket!!! Leaking!
- Tj07 Bottom Fitting
- Blitz Formula custom modded SB+crosslinx WB
- Returning to water cooling!
- Planning on new build...Need your opinions..
- Koolance like shroud without radiator? (Now Custom Shroud Build)
- Piecing together a system, need your input!
- Is there something wrong with my Fuzion v1?
- Dual-Impeller Pump - "Kaltmager"?
- This will take some smarts to answer....
- anybody useing antec 900 water cooling
- EK EVGA/XFX 790i SB, Compatible with Tri SLI?
- Tool for getting clean cuts in hose
- 1 RAD,2 pumps,and 3 blocks.oh and a res:-)
- Garden Pond Cooled PC
- Is this guy right?
- Rawr! Rad doesn't fit!
- Liquid Silver Coolant
- XSPC res top qc issues
- Gallium + Indium metal as TIM
- Adding fungicide to feser
- Silver in the loop?
- My first foray into water
- McMaster-Carr will not ship a G1/4 tap to Canada
- Question about watercooling two 8800GTX's
- Need Better Loop Config, Too Hard To Bleed
- Asus 790i Water Blocks.
- P182 water cooled *In Progress - First Time Custom WC*
- Think it will still work?
- DDC pump question.
- The I love Petra's Tech Shop Thread
- How best to clean my copper block??
- Tiny Pump
- Xthermal - good fan is now available
- Just gotta point out....
- Temp Sensor readout on Alphacool display
- Alphacool NexXxoS HP Pro 775 C/w
- DB's Ghetto DDC mod
- Fun With Coolant and Motherboards
- EK G92 waterblock fitting ? !!
- Lapped IHS or Stock IHS poll?
- Danger Den 8800GTX Thermal Tape or TIM for memory?
- Question on Asus Striker II Extreme Fuzion NB block
- EK 3870 gpu block and fitment problems with different brands of 3870 video cards..
- Where can I buy the CPC connector?
- Adequate cooling for 45nm Quads?
- Signs of corrosion?
- quick watercooling question
- 2 loops 1 res
- How does this CPU lapping look?
- Low-restriction CPU block replacement for EK Wave?
- Water temp monitor
- building my firts liquid config under 200€
- please help need advice
- Why Zerex?
- A little re-aranging.
- how much boost from Dtek
- Internal Watercooling in P182 - Advice Appreciated
- My WC'ing setup
- question - modding a vga cooler
- DDC 18w?
- How many rads can a torture rack hold?
- fuzion v1 and 1/2 ID 3/4 OD tubing
- Radiators on front of case why??
- What Can I Expect
- Perfect Mounting
- Watered Woofdales - Speak up!
- SWC DDC TOP comming up - tests prove better than Alphacool, DDCT-01s, XSPC
- Bitspowers new off centre rotary adapter
- High temp !
- Is it worth picking up a 780i to water or use 680i?
- Running my lain ddc 3.2 pumps @ 7v?
- ddc 3.2 rattling noise
- How does CoolIT freezone etc compare to water?
- Asus P5E3 Premium WF(X48) + P5E3 Deluxe WiFi(X38) blocks
- Watercooling Q's
- Which case should I choose?
- Lapping Criticism
- Custom NB + SB Design Help?
- AM2 MB and waterblocks
- Jab-tech good e-tailer?
- Will this work?
- New loop to my Cosmos S
- *new* Quad 480 Feser Rad!
- removing paint from Radiator fins,, helpfull???
- Q9450 under D-Tek Fuzion with 5.5mm nozzle - Advise please
- Safe tightening of a D-Tek on a lapped tapered Q6600
- Algae problem... please help
- I can't fill my loop (help)
- Anyone order from MIPS recently?
- EK-DDC-X-Res 100
- wth uber 120 radiator
- Which Yates for 2 Radiators?
- Quick newb question (sound)
- which is better help me decide
- Got the Swiftech H2O-220 Compact kit, some questions
- Possible D-Tec fuZion 1 modification.
- Feser Balance
- Koolance 9800GX2 waterblock review [56k warning]
- Cubes!
- Ode to 680i - A poem for your enjoyment
- MC TDX a good alternative?
- Bitspower crystal Q block 360
- cost of powder coating???
- Build Advice Needed
- PA 160 vs Swiftech 220 vs BI GTX 240
- Another testament to stepping :)
- New build coming up for GTX 280
- Are this the right choice?
- Air Conditioners
- Cuplex DI Internal Pics 56K warning!
- Redid my waterbox plus...again
- Few Lapping Questions
- Dead zone impact on radiators
- Is a PA120.1 Sufficient for this?
- replacing the Striker II Extreme Fusion NB waterblock
- Opinion/critize this configuration for next Worklog w/ D-tek Fuzion v2
- Free snickers with a WC order LOL!!!
- Annoying ticking noise from Ultra Kazes?
- Dual MCR120 enough for this loop?
- Few watercooling questions.
- gfx card mem/mosfet cooling
- Xbox 360 Water Blocks
- Refitting stock cooler on 8800GTX, TIM Pads or Thermal Paste?
- First design for a NVIDIA 280GTX block
- what do yo think of this new fan from Koolance
- [Worklog] Xbox 360 Elite
- which thermalright mosfet HS for evga780i
- 〓 WorkBlog: upgraded my Shuttle W/C 〓
- What is with the one-sided products?
- quick check with tline
- outside Rads inside computer
- iandh gets frisky with his XSPC top...
- Sanyo Denki's "New" Fan