View Full Version : Liquid Cooling
- MC14 Cleaning and re-stickying
- Md20 + 3*he102.3
- recomend a good reservior
- How Do I stop the @%@^ Water From Swooshing and Sloshing all over the place?
- Mosfet cooling solutions
- Is this normal for a PA120.3?
- G70 + Thermochill 120.3? Modding Tips?
- 2 pumps, 2 rads , how does my rig setup look?
- Question about nylon clips
- Has anyone been water cooling on the Asrock Dual Sata II?
- Thermochill Shrouds
- Watercooling my Lian li 767
- Question about DD Stacker bottom shroud
- 1/2 ID x3/4 OD...normal worm clamps, or wide-band?
- Would everyone agree that the thermochill rads....
- cloudy water?
- How much can a DDCT-01 handle?
- watercooling window unit -need opinions
- Fans: MCR220 Quick Question
- So, i was messing around with my tubing.
- Loop Order advice wanted
- Apogee GT Bowed O-ring Concerns
- Watercooling system recommend
- BigNG Help
- Swiftech MCR-320 Mounting
- Arctic Alumina thermal adhesive
- anyone tested this....?
- how long should let items sit in vinegar?
- Whats the highest voltage you should perma-run your cpu @ on water?
- Using this coolant with my first water setup. Stuff ok?
- Philly's Cold Air Induction
- Block advice? tough choices to be made.
- Modding and Painting a DDC
- What are good temps for a qx6700 o/c
- AquaXtreme MP-05? Have fuzion and the new apogee made this outdated?
- Ultimate silent water cooling??
- anyone heard from EK?
- Brass barbs on MCR320
- installing coolsleeves OMG HELP LOL
- Silence is Golden...
- Which Yate?
- EK nb/sb blocks
- Is it ok to mount the radiator with the ports on the bottom?
- sladesurfer's evolving coolers
- Add Another Triple Rad Lower my Temps?
- 8800gtx what gets hot?
- Thermochill PA120.3 cannot be mounted upside down?
- Is there a temperature monitoring program that will read in the negatives?
- 1st Loop
- Preparing my blocks
- Ok Pro's, what are my options? What would you do/do you do?
- Not Another Waterblock Thread....
- Tygon 7/16 x 11/16?
- E6300 temps with a single 120 rad
- Thermochill 160.1
- Anyone know of any good 360mm fans?
- Noob Question--Bay Reservoirs
- Waterblock for X1950XTX ...
- I caved and now I have a d5 and an iwaki?!?!?!
- Got propane?
- Pump died :(
- Waterblock NB KLON by Pietach
- Does the EK-FC8800GTS work on the 320MB version?
- Push or Pull performance difference ?
- Did my Storm kill my motherboard?
- PA120.3 Dimensions
- EK-FC8800 GTX (Acetal Top) Questions
- How many case fans do you need for liquid cooling?
- Do I need more pump?
- Some WC questions....
- 2 rads internally, both draw outside air or only 1 OK?
- PA160 and U2-UFO
- Unbelievable!! Where can I buy T fittings locally?
- Replacing Apogee GT o-ring
- best way to drain a system?
- Flat based MCW6002 & LGA775
- screws for BI EII
- Anyone using Dangerdens 8800 full block?
- Using a mid tower, need some advice on radiator placement?
- Moving a water cooled PC around?
- Flow Testing With Various Blocks
- Help me fix this kink
- Question on T-Line placement?
- LAING DDC-2 with 3/8" to 1/2" reducer ...
- Cooltechnica.com - Down for the last week ???
- First Attempt... Looking for input
- This rad any decent?
- Which tubing for 1/2" OD fittings?
- Cleaning rads/blocks with alcohol
- Thermochill PA120.3 and Waterchiller combo ?
- Pentosin G11 in the UK?
- Question about waterblock tension/installation!
- Where to buy Delrin?
- HardwareLabs Black Ice GTX...?
- Radiator inlet/outlet identical/makes no difference?
- Cooling the 975X question?
- Hello XS crew...
- Which motherboard to buy for e6600 water cooled?
- What water is best for a Core 2 Duo or Quad?
- Suggest me a Custom Kit for my E6400 + 8800GTX
- Yet another petra's techshop rocks thread
- temperature difference betweenn cpu and water
- Tygon B 44 3 - 1/2 ID tubing Anyone usin this ?
- How to get your water temp to [Almost] ambient?
- OC Labs MB-6E - anyone used this before?
- Filling/Bleeding via fillport?
- Feedback needed from everyone here PLEASE!
- 3rd Attempt, Hopefully a charm
- Chomerics Thermattach T412 Thermal Tape and EK-FC8800GTX (Acetal)
- Installing AquaExtreme High-Flow fitting on MCR-320
- Finally got her up and running! thanks for everyones help!
- Typically, how long between cleanings/breakdowns of a well-conditioned water loop?
- My Laing DDC is dying!!!
- So, I'm upgrading the WC-Setup. What do you think?
- Black Ice GTS120.1 --> ThermoChill PA120.1 - signifigant performance increase?
- New to cooling
- MCP350 + Petra Top enough for multi-block loop?
- Which would work better for radiator options
- First Liquid cooling - OC attempt...comments welcome!
- Good fans for Thermochill
- EK blocks
- Anyone know of a "good looking" inline temp sensor?
- My watercooling rig. Input welcome.
- Pump loop question
- New 8 into 1 Outlet Waterblock :-)
- Just finished my leak testing (First WC build) w/PIC..
- Semi - Permanent Epoxy mixture?
- Masterkleer ain't clear ... :(
- Sliver RBX on ebay...did i do good?
- what would look better? tubing thoughts
- EK 8800 full cover waterblock?
- P5N32-E SLI Mosfets
- My first journey into W/C w/ pics
- First W/C setup in my CM Stacker 830
- Temperature
- To those with MCW60+G80....................
- n/a
- Liquid set up
- Thermochill PA160
- 8800gtx no IHS
- Looking for a mount for my BIX 3 raidiator
- what NB waterblock do you guys recommend for a RD600(ie intel board)
- Storm bolts..what size allen key?
- Setting up my Loop..
- Modding a Storm - Isit wrong too?
- Let's see some Watercooled Small Form Factor...
- Please help me choose 2x120mm rad
- EK Wave waterblocks
- Storm fittings mod
- Heater core or conventional rad??
- EK-FCX1900 Vreg Question
- Northbridge heatpipe question
- Finally finished my PC *pics
- Parts list for P180. OK?
- My new loop with pics.
- Just redid my loop, lower temps, woohoo!!
- Is my head too big?
- finanally ordered my new setup
- Watercooling For Overclocked Quad Core (Low Noise)
- Maze 4 and 8800??
- P180, 2 BIP's, Dtek & EK joy
- External Cooler
- Is this distilled water and is it okay?
- Methods to cool DDC-2 base ?
- PTFE tape
- Fitting a maze4 on a 8800
- GTX360 or PA120.3 ? which 1 to buy ?
- Heat dissapation for black ice rads
- D-Tek Fuzion loud?
- A "Beginners" guide to WC: By TechARP
- How much heat would a...
- 1st WC rig (100% passive, btw) - feedback needed
- the best of the best as of right now.
- My latest watercooled build
- My first wc'ing loop - temps (good?)
- Thinking About Upgrading Watercooling Parts For my Quad Core... Advice?
- Test rig is in testing ;)
- The Science Behind Coolants
- New Case
- Best CPU block for current and future multi-cores?
- do I need o-rings for my MCR-220QP rad?
- This cant be normal?
- Polish Storm GPU by Pietach
- Bring on the second loop...........or not?
- Best way to clean your components?
- A fitting size/ threading question
- Custom Water Cooling Case
- Remounting DD full cover on XFX 8800 GTX
- Temperature deltas and heat dump
- Who has Innovatek VGA Waterblocks in the USA?
- mounting MCP350 vertically
- Is anodized aluminum that bad when mixed with copper?
- Yowzers...830mm reservoir???
- Anyone successfully mount a triple rad inside the top of a TJ07?
- PA120.x
- thermochill pa120.1 very disapointed.
- Need a Car Radiator
- New watercooling setup for 2cpu rig, open for suggestions/critics
- 680i NB Block ?
- Very new to watercooling, help is appreciated
- New TJ07 cooling project...could use your help/ideas
- New 680i south bridge fans finally released
- Stack Attack Building Log <Lo-Res>
- Thermochill need help
- new to watercooling, need advice
- anyone with HW Labs radiators
- Nice D-Tek Fushion Accessory, Also known as “Nice 775 BackPlate”
- Fullcoverblock or not.....
- New DDC top from Italy
- Which Pump is More Powerful?
- rad standoffs?
- Drain plug?
- stained tubing..
- Thermochill rad barbs!
- External Enclosure ideas - and or pics
- DDC base threads?
- Swiftech MCR-220 Leaking Please HELP FAST!!
- Black Tygon
- Black Reservoir ?
- Distilled Water: Same as De-Ionized?
- How low can you go?
- Does EK have any NB/SB blocks that will fit...
- Does any one know how this pump is...?
- Somebody make a liquid sticky
- DDC presure test!
- Pa120.4??
- Loop set up
- logiX and logiS: wb for the 8800 GTX and GTS
- Apogee GTX
- Just wondering
- Iwaki RD-30 test on bench setup. Bill, WTF?
- Please help to find Coolit Eliminator?
- Practical Question: Bong or Radiator
- Quad Core - Storm to Fuzion Update.
- Silver plating on a block
- Mcubed power 2 pumps?
- Idle vs Stressed = 20+ degrees difference?
- Redoing my WC and need some help :)
- chipset block
- 2 mcp600's
- loop flow
- PA120 drain?
- Which GPU cooling would you use?
- Innovatek 8800GTS Cooler 501254
- PA160 help
- Experience appreciated.
- Purple Coolant?
- Which WB
- Current best waterblock and rad for QX6700?
- Fluid XP+ EXT?