View Full Version : Liquid Cooling
- Is water cooling much better than air?
- White Crud in Your Loop? Here's Why...
- How would you build a wc system around this case..?
- Need help bleeding air...
- Distilled Water ?
- Does it matter which side of the RAD to mount fans?
- Pump monitor
- Iodine additive turn clear?
- water evaporating from my wc system?
- How to put clamps on the Fuzion?
- New DDC-Top
- Bad temps
- Watercooling nvidia 8800GTS full cover vs hybrid
- wb dimension problems :(
- Case for my system
- Dual 120 Rad. reccomendations?
- Apogee GT vs Storm (quad-core)
- Drawing of top plate needed
- MCW60 on 8800GTX!!
- Exceptional customer service from Alphacool DE
- Liquid Cooling in a Lian-Li V600
- 3/8" tubing or 1/2" tubing
- TT ARMOR / Watercool Build Help
- Restriction using "Quick Release Bulkhead Fitting" & Black Tygon
- What 120mm fans would you use on a radiator
- Paperclip trick won't work
- First Cleaning
- fan setup idea for my MCR320
- A case of the Greenies
- Is Silverprop ever going to come out with a new gpu block?
- Case suggestions for PA120.3
- Aqua CPU Cooler cuplex XT & Zalman ZM-WB4 GOLD
- Idle temps question for W/Cing?
- HP Workstation Goes Water Cooled
- That's it! I'm FED up with air cooling! Recommend me some parts!
- Mountain Mods Poll
- Rebuilding WC loop... Questions
- RadGrillz for Thermochill!
- D-TEK FuZion CPU Block in the UK @ Last!!!!
- How separate is separate ???
- FuZion review
- when is it nessecary to watercool the north bridge?
- need some help...STORM block!
- Cleaning rad with pure acetic acid?
- Fuzion/GT dimensions
- Zern P12 DDC-Top
- Thermochill PA160 push or pull??
- Where can I find G1/8m -> G1/4f adapters?
- USA residents, can you help a fellow watercooler? - Please!
- G80 GTX WaterBlock by COLDZERO [Portugal]
- 1/2 to 1/4 fitting or Barb change?
- Is it ok to have 2 different CFM fan for push/pull config?
- WC kits question:
- searching RED dye
- Rona 40% Algae any good?
- Prestone Dexcool as additive
- Will the setup cope with a NB block?
- you guys talk about blocks and their restrictiveness
- thermochill PA 120.3 Shroud
- How do I fill my loop without running the pump dry?
- Quad core + Fuzion=much better than storm?
- HELP NEEDED - High Temps on Storm
- OT Sorta - Watercooling workshop in August?
- Fittings going into my MCR320 rad, question
- Thermochill 120.3 PA cleaning?
- Removing filter
- W/ everyones help here, here are PIX of my 1st W/Cing setup
- Fluid XP+ Chloride?
- Don't try this
- Short vrs long tube loops
- Would a Swiftech MCP655 work "upside down"?
- D-Tek Prototype Nozzles
- Mamoth watercooling - one TJ-07, 2 pumps, 2 rads, 8 blocks, 4 cores :P
- "Personal" Lubricants
- whats the top 3 CPU waterblocks out there?
- Quick Question Before I Order
- My First WC loop; overclocked QX6700 success
- Apogee GT mount, anyone have this issue?
- EK Res on an Alphacool DDC
- SwissFlow SF800 "Impulse Transducer"?
- Where can i find these?
- For a cheap watercoling solution, would this be decent?
- Loop advice please- total water system
- Proposed watercooling setup - advice/suggestions welcome
- Speed settings on the "D5" series pumps?
- Is load temp good for my W/Cing setup?
- Temps suddenly skyrocketed
- Have you seen this block?
- Flow direction in Laing/Petra DDC pump
- Portion of Barb necessary to cover with Tubing
- just put together first h20 lots of air? how to purge?
- Any Dual Core Results for Apgoee GT vs Fuzion vs Storm?
- Apogee GT O-Ring Tweak?
- Copper Pipe instead of Plastic Tubing?
- Apogee Leaks
- PA120.3 + fans..
- DDc Top decision
- Quick question about my D5 Danger Den pump?
- Should I open my RES to let anymore air out?
- O-rigns for Swiftech MCR-220 rad?
- BigNG questions
- Apogee GT inlet/outlet??
- DD Black Ice GTS 360 or Swiftech MCR320?
- Delta from idle to load?
- 8800GTX WC edition
- Iwaki RD-30, Laing D5 or Iwaki MD-15
- Question about EK Hi-FLow barbs (bought at Petra's)
- My findings on an easy way to bleed air w/ t-line
- Yay or nay to MD-150R 220NL??
- Adding a Pressure Gauge to my loop
- Tearing down a Water loop, where to start from?
- Lytron Heat Exchanger Performance. (water loop capacity questions) help design a loop
- 1/2" Compression Fittings on Apogee?
- Tuniq Tower vs Swiftech H20-APEX Ultra
- When you leak test....
- Water Cooling Parts Help!!
- I switched to the "THICKER" o-ring on Apogee GT!
- Oh dear what have i done!!!
- Question on bleeding the W/Cing system?
- Non pressure dependent Thermal Paste
- Defective PA120.3
- Replacemnt Pads for Full Cover blocks
- Best water cooling for qx6700 and 8800gtx ?
- Is my pump going to fail? It needs a knock to start..
- Micro RES, how much fluid should be in it?
- Dtek Fusion or Apogee GT what would you chose?
- And so my liquid cooling project begins *PICS*
- orthos error
- Do I need water cooling?
- EK High-Flow Fittings on D-Tek Fuzion
- NB block for BadAxe2
- Prepping the parts before install
- Preventing kinking, what works?
- How much of a benefit with Petra DDCT-01
- DD Maze4 On An X1900XTX?
- First time WCer looking for opinions
- Thermochill Gasket
- Rad cleaning acording to Marci aka Thermochill
- Update on my W/Cing setup to "hopefully" fix my temps.
- Concerns and questions (Rather long).
- Anybody use these barbs with an Apogee/GT?
- Best block for X6800
- How hot can it get?
- DDC 18w Plexi borked? Foam party??
- Starting your PSU for leak testing
- What can i put in my 3.5 slot to help with water cooling
- Apogee/GT + EK Mounting Hardware = ??
- Intel E6600 under D-Tek Fuzion still hot .
- Is my MCP655 dead?!?!? Please god no....
- Getting in Position for My First Water Job
- MC14 ramsinks
- Worth adding single 120mm rad to PA120.2?
- Should I change my CPU block?
- Radiator Placement
- Internally Mounted RAD Fan Orientation Question
- MCP355 owners, please help!
- Is there a fan shroud for the MCR320 rads?
- Swiftech Laing D5 equivalent pump inquiry.
- 3/8" BSPP Female to 1/4" NPT Male
- Argh !!!!! Tea accident???
- Cooling a Laing DDC-2??
- thicker Apogee GT O-Ring questions
- Another Liquid noob needs help - - - I read and read though
- Uh Oh...
- Rad on Top of Case - Hard to Bleed?
- Please evaluate my first pass
- PA160 mounting
- Hardwareluxx Laing DDC Dual Attachement Inc 2x Pumps
- This guy is driving me nuts ~
- Cap replacement for a bay reservoir
- fill port hole, help !!
- Eye Candy...New Liquid Cooled Rig...
- 120.3 Rad Fans suck/blow
- Advice with loop layout please
- Questions about cleaning
- Another is my temp too high question
- X2 build: 680i 2x.8800.GTX.SLI, PA 120.3, EK Blocks
- ASUS N7800GT Dual Watercooler
- Vadim Cepheus Q80
- Ramsinks
- advice on my sc setup
- PA160 Radiators
- Giving back to Xtrem forums!!
- Water cooling layout
- Iwakis still cut it?
- Mounting EK Reservoirs...
- Tube: 1/2" versus parallel 1/4"
- Another Loop Layout advice request
- New Loop / PC Setup
- Dual Pumps: what arrangement is better
- Looks Like I'll Be Joining You Guys Next Year
- Experiment Cu: vinegar, vinegar + salt, solvent
- Watercooling temp monitor
- Is a Maze4 still useful on today's CPUs?
- Replacing stock barbs, which to buy?
- Tear this apart so I can build it right.
- Any thoughts on Typhoon Repack Bay Res?
- Apogee GT or CoolIt Freezone?
- Whats the Deal? D-Tek Fuzion????
- PA120.3 Sufficient?
- Which pump would be better DDC-2 with custom top or D5 ?
- Danger Den Black Ice GT Stealth 360 vs. Danger Den Black Ice Xtreme III Radiator
- Considering changing RAD already, maybe??
- dual pump in series
- Help me find a case please!
- Delivery - damn and I was planning on doing some work tody
- Have 2 blocks - which to use
- Anyone seen/tested this cpukindofblock
- Metal Barbs on an MCR220/Apogee GT?
- Are the MCW60 GPU waterblock and 1900xtx compatible?
- any issues with running two DDC's from ONE reservoir?
- Bent rad fins?
- AS5 or ASC
- Swiftech H2O Premium W/C Kit VS Tuniq Tower?
- Can't feel the water temp?
- Guys, help me out with my temps, please (pics included)
- Tips for buying a used WC system
- Swiftech h20 ULTRA apex h20 +
- ThermoChill PA120.3 how much heat?
- Room @ 21c are these idle temps about right?
- EK chipset blocks
- Can i use CAR coolant in PC loop?
- Koolance 8800 Block?
- Is DangerDen normally low-quality?
- Delivery time from EKWaterblocks
- How is this RAD compaired to my MCR320 RAD?
- Swiftech MC21 - I feel ripped off.
- Thermaltake Armor (Kandalf) case with 1/2 ID tubing
- Koolance CPU-330 Block & 8800gtx Block Review
- Stacker 830 Liquid Cooled
- Coming Soon! The FuZion GFX
- Hard-mounting a cpu waterblock?
- Is a single 120 radiator enough?
- Fixing a spliced wire on the MCP350.
- EK 8800 fullcover block
- Swiftech MCW6500 Released
- Watercooling 2 computers at the same time is a PAIN
- Is Petra (Alex) getting PM's
- What would you say to these for radiator fans
- Custom Temp Probe Idea..
- What pump do you reccomend..
- I thought 7/16 tubing was supposed to be "hard" to put on 1/2 barbs?
- what pump and rad? - could use your help
- MCW60 No Contact with GPU Till Tightened
- BIX2 cleaning
- QuadCore Temps are these ok ?
- UV Additive losing its UV properties over 10 days?
- Lian-Li Case
- What GPU block fits a 7600GS?
- Even newer layout plan