View Full Version : Liquid Cooling
- ek nf4 rev 1.1 owners?
- Masterkleer 7/16 ID 5/8 OD-Iwaki RD-30 Issues
- Radiical Turbo Head Rev.2 *Not 56k Friendly*
- Loop order, quick replies appreciated! Building loop now.
- Black Pearl 7950 water cooled...
- Finally got enough money...
- Fans for Rad
- Push or Pull through DangerDen Heatercore with Shroud...
- Two Thermochill PA120.3s'???
- Choosing a GPU block.
- Foamy water while bleeding...
- Alphacool X1900/X1800 mosfets cooling cruchs them
- I'm searcing a pic of an Apogee WB mounted on P5WDH
- Cheap 7600GT/7300GT watercoolers?
- Black Ice Pro - Fan Mounting Question
- noob questions about barbs and assembly
- noob question about barbs, assembly and misc stuff
- Ideal SLI solution
- Get a "True CPU temp"..new program in AMD section
- Great Online Retailer to Buy Pentosin
- WC gear shop - german, UK, .. people help ....
- Heatercore with High CFM vs. Black Ice Pro II with Low CFM???
- question regarding 2 loops/2pumps
- condensation
- Barb Confusion for newb
- Cathar block
- Eddy Ek's FCX1900
- Swiftech MCW30 for P5W-DH
- Wich loop is the best
- Watercooling Kit to cover many components
- adding a second RAD .... worth it?
- Dual Rad in Lian Li v-2000 - Adventures in H20.
- Alphacool Ready2Go Coolermaster Centurion CAC-T05 with Pre-Installed Watercooling
- Mini Pentosin (Worklog) 56K Warning
- Distilled+Deionized Water
- Swiftech Puzzle
- Coolermaster Aquagate + ASUS CT-479?
- CM Stacker + PA 120.3 rad mounting?
- Pentosin vs Zerex
- Shorter tubing doesn't improve temps - Why?
- Bad Axe NB WB, need help before order.
- pumps and thoughts
- Help! Installed water cooling, now system won't POST
- noob cleaning question
- Radiator Question
- copper scratch remover
- I'd like some advice please concering cores and pumps, help a noob out :)
- Just wanted to say thanks for the help
- Swifty MCP650 Inlet Hose WARM
- Mem heat sinks on a X1900XT with WC on core
- PA120.3 features
- Laing DDC Pump Discussion Thread
- My experience with an Asetek WaterChill kit
- Replacement 939 mounting kit for Storm
- Petra'sTech Water Cooling Guide and Kits - Looking for Feedback
- 24/7 RD20 pump use concerns
- New Danger Den Delrin T-Fitting
- brass or copper TDX top?
- x800 & chipset water cooling
- AquaXtreme barbs don't fit Cathar Storm
- Sladesurfers Rig
- Barb questions
- 1/2" ID Tygon anti-kink "things"?
- 7/16" Masterkleer and DD Perfect Seal barbs
- Stacker 810 : Which Dual Rad?
- Need one more vinegar pass?
- 7/16" tubing hose clamps?
- Fans or Heat-Pipe Technology for Laptop Cooling
- Scrubbing Bubbles & brass
- Can anyone build me a WC loop?
- Waterblock for X1600xt
- Now it's my Turn (MCP655/Storm Rev.2/Maze4/BIX Single) @ 7/16 Tubing
- 1/2 or 3/8
- PA 120.3 and six yate loons
- Pump orientation
- Where can you get Pentosin in the UK?
- The truth about G1/4 and G3/8 fittings
- I need some advice on a water cooling setup
- What is this crap on my MAZE4?
- Im lazy and I have a possible 200$ budget for w/c solution.
- Cheers!
- Building WC setup need some advise on components
- My First Xtreme Water Cooling Setup
- Leaking rad
- Custom WB controllers for production.
- new to WC -- questions
- the best hands down
- The time is now. My first loop.
- A Question about Fans.....
- which screws for thermochill pa120.2 and panaflo fans
- Who said 1/2" ID is impossible to get onto 3/4" OD?
- high flow fittings?
- Watercooling.....your PSU?
- Watercooling questions
- cutting holes for your rad
- pump questions
- The Borg have landed.
- How did I do?
- Thermochill 120.3 Neoprene Gasket ....
- :confused: Case dilemma
- Tube cutting tools and water additives
- fittings size
- Help fitting Maze 4 GPU cooler to 7800GT
- Bad bigwater temps?
- My future setup for Conroe and a few Q's about it.
- New mounting bracket for storm?
- Copper Sulfate
- black ice gt?
- anyone tried to remove conroe ihs yet??
- First water cooling kit.....is this a good buy?
- Hm. Promising rad DESIGN from TT
- Lga 775
- RD-30 / PA120.3 liquid cooling upgrade
- New case to hold everything
- Where can i find a thermochill he 80.2
- how many fans for my rad?
- Help in sourcing some replacement parts
- Metal Barbs For My Thermochill PA120.2 ?
- Vinegar soaking question
- Wrapping barbs with teflon tape..what t od owith O-Ring
- Does Dual DDC pumps make a noise ?
- Watercooling choices for AM2
- Thinking about adding a second D5?
- Alphacool Laing DDC Acrylic Top Mod...
- Hmmm 9 yate loons on the way
- FluidXP HP Changed Colors and Glows the wrong color!
- pushing vs pulling log thread
- Setup sugestions
- T-line extreme noob question!
- fsb boost from watercooling 975 northbridge?
- Revamping My Water Loop, Need Suggestions Comments
- perfect seal or regular barbs?
- DDC ultra/Radiical turbo top rev2...should I expect any better temps
- Old-school Maze4 GPU and an X1900XT?
- Dual vs.triple rad
- What to expect
- Mixing metals (not aluminum)
- Conroe + 1900crossfire on MCr220
- The new Laing D5 question
- Watercooling system decision help.
- InTheFlow's Rig ~ Look at the purdy pictures...
- P5W DH - Which NB Block to get?
- Controllers for watercooling setups
- Howmuch difference between 2 flow vs x flow cooling cap. wise
- BIX 3 performance with low cfm fans
- Rad Sizes
- Universal Waterblock?
- Prelimanary setup questions
- does anybody have a link or pics of the intel hsf to waterblock conversion
- Danger Den MAG II LE Questions!!!
- Help Cooling a Shuttle SSF
- Screwing the MCP655 to the top of the case?
- The best conroe for thos wc case?
- My new WaterCooling setup, still some questions.
- Shroud for Black Ice Pro II???
- Where to get 3/8" BSP Brass/Chrome Barbs?
- contemplation
- Leak-testing question
- meanwell psu undervolting
- Will this cpu water blocks work with my parts?
- Help me pick my DC pump
- newb
- leak testing a psu powered pump
- How good is this WC setup?
- installed a thermal sensor!
- DC vs AC pumps
- Post Your Painted Radiators
- new setup, delayed becase of logistics....
- Pimp your Pump
- Opinion for wc parts needed :)
- 10C Delta... is my mobo that far off?
- Why is 7/16'' so much better than 1/2'' tubing???
- another one of thoose "is this a good w/c setup?" thread
- DD NV68 work on 7900GT?
- 12c delta too high?
- Plunging into a watercooling system.
- Electromagnetic pump.
- good version of the ddc pump?
- Quick question about the BIPII and MCR220
- Project Sloth
- My Alphacool Acrylic DDC Mod Top
- home made water block/f P5ND2-Sli deluxe
- where can I buy this DDC-Ultra?
- Alphacool NexXxos XP light Good or bad ?
- Water Setup Effective but is it the best.
- WC Ideas/Suggestions.
- DDC 10w / 18w PCB (printed circuit board) Photo Request
- Up and running, thanks to all the forum contributers
- Tracking down waterblocks i saw last year
- improving temps 5*C with hommade shroud- you might laugh
- Danger Den MAG II LE (review & pics inside)
- I need a new pump, any recommendations?
- Apogee block on the P5W DH
- Apogee Vs Storm
- Laing DDC Startup Current
- G1/4 BSPP to 1/2" elbow fittings - don't exist?
- What PSU do you guys use?
- Test results for DDC Ultra with Res and without?
- 1/2" inline water temp sensor
- will a pump run without any water?
- new revision EK Barbs, O-rings and various Blocks
- Current progress (OC+Water)
- Ah crap. Help Needed. Leak.
- I <3 McMaster
- PSU idea, any problems?
- advice needed: build or wait?
- Should I be concerned?
- MCP350 and DDC Questions...
- BIP Bolt Size
- difference BIP3vs BIX3 with low CFM fans.
- Amazing differences between AS5 & CLP!
- question about Alphacool Laing DDC pump 12V Pro
- New/old DD barb size?
- Radiator Backpressure
- Water or C2D? I chose water, upcoming setup!
- WC Setup & Questons
- 7950GX2 block from DD
- How long to soak block in ketchup?
- Making My Own Liquid Metal
- Plexiglas Good??
- M-1 GPU block.. barb
- Project Illuminati - Dual Loop WC Worklog
- ThermoChill PA120.3 shrouds?
- Is my d5 pump dying? Help!
- Secondary Components Aluminium loop
- Mounting a DDC???
- AquaExtreme 50z pump problem
- Sereral newbie questions.
- Crossflow or Not?
- Should rads for PC cooling come with drainage or a fill plug?
- D-Tek mp-05 + Gigabyte 956p-DS4 = Compatibility?
- Bay Res User Going T-Line... Questions...???
- Kudos to Petra
- Second loop for graphics cards. How's this look?
- 120.3 rad in a mid tower (lots of pics)
- water block advice
- BIX2 or BIX3 futuristic Question?
- EK GPU Waterblock (X1900 CF), What tubing size is best?
- D-TEK MP-05 Pro LE mounting problem. help :)
- Where to find neoprene to mummify my 50Z?
- 1st time W/C build on Opty 165
- Pump proximity to hard drive(s)
- What screws for cd drive holes?
- What the Frack is this Funk in my T-Line?
- 3 bonneville77 rads/ Segmented or parallel???
- Why not use heatpipes?
- Doh!!
- Question About AquaXtreme MP-1 GPU Block Mounting
- Nautilus 500 upgrade
- Coolant liquid...