View Full Version : Liquid Cooling
- EK 670GTX Copper?
- 3930K @ 4.6 temp check
- Bitspower CPU Block Summit EF (Intel) (Acrylic Top Version)
- Two Liang D5 Strong (in series) or one Iwaki RD-30?
- EVGA GTX 580 Hydro Copper 2 Sticker Removal
- Suggestions on a quiet pump
- Looking for a good case
- Single GPU and Single CPU in a Parallel Flow Loop?
- is your mcp3x or drive 35x loud when speed changes?
- My rad choices
- Potential D5 pump problem?
- New loop - disappointing temps
- 3 pin to PWM
- Direct Die vs IHS
- FYI, new XSPC D5 res/pump does not fit flush in all cases
- Future of Cooling?
- EK Supremacy Review
- waterflow through dual VGA - Serial or parallel (images inside)
- Has one every tried cooling the HIS directly (no Water block base).
- How much did you/would you spend?
- Asus Maximus Gene Z77-watercooled
- Whadaya think? First time build!
- Fun with Indigo Xtreme
- Alphacool Nexxxos UT60 drill template
- MCR-320-XP Hole Alignement Off
- It's been 6 years.... what's new in tubing and fittings?
- Alphacool QC Fail!
- does water cooling of most parts in a pc have an effect on overall power usage?
- Help with a few updates to my loop
- Product of the Year Winner!!! Great Job Corsair!
- Interested in an Asus Z9pe-d8 WS waterblock?
- [SR] DT Sniper Review
- [SR] Phobya UC-I
- is there a need to lap the GPU waterblock till it's shiny?
- Rev 2.0 RP-452X2 better than previous revs?
- CPU Waterblock Preferred Results Standard (poll)
- Need a quick advice regarding cooling.
- Enough Rad???
- Anyone with experience on EK FC5870? TIM pad thickness???
- PWM controlled modern watercooling
- the MCP 35x in my Drive V3 is low and whiny
- What to clean radiator with
- new socket... so need a new waterblock...
- mcp 355 Pump replacement suggestion
- GTX 580 ammount of heat in Watts
- fan spacing on 140mm alphacool radiators
- Recomendation on Radiator
- Asus Maximus V Formula Fusion Thermo
- Heatkiller 3.0 orientation on LGA2011
- Does one first test a watercooled graphics card on air?
- Silver or PT Nuke?
- Top cover for Lian Li
- Need some fan recommendations for my rads please...
- News? ..........EVGA GeForce GTX 680 Hydro Copper
- Thermaltake Water2.0 Pro Review
- Mayhem's Black Oil
- A loop 4 years on
- Dedicated PSU for Pumps and Fans?
- Which one of these 2 is better?
- Fans and radiator (WC)
- Custom made mounts
- Tons of new stuff from Aqua Computer
- Stren's 2012 CPU Water Block Roundup
- Newbie questions about algae, corrosion and some other.
- Lok-Seal 45 Deg Qustion and Heatkiller 680 backplate
- Compression Fitting Collar Question
- Bleed mc35x w/res combo
- is the stock liquid cooling on the maximus V formula viable or needed?
- Newbie to water cooling, who needs help for GPUs
- Will lapping your CPU help when using Indigo Xtreme?
- bought all my gear but having second thoughts lol!
- Swiftech releases Maelstrom 5 1/4" dual bay res
- How much Pump power do you need? Alphacool has you covered.
- Radiator 420 with fans spacer of 20mm
- Cutting top cover/side panel
- Finishing Off Build - Need Advice On Cooling Dual GTX 580's
- Cleaning Pink
- Need help with tubing size for my compression fittings, please.
- Watercooling newbie needs helps and suggestions please!
- Connecting external radiator(s) - alternatives to grommets
- Temp check.. High ambient @ 30C; is 2700K 4.8Ghz/1.355v 74C LinX w/ Raystorm decent?
- HELP! Monsoon res won't fit 800D case
- Starting of Corrosion?
- Compatability of Old and New EK 7970 Blocks
- Swiftech releases PWM controlled version of the Helix 120x25mm fan
- Moving rad/res/pump(s) to the basement, what pump woul be suitable?
- Do Black Ice GTS 280/420 X-Flow exist?
- Need help with a list of components... if any
- Heatsinks for MCP-35X
- Quick review of the Swiftech fittings
- hi just a quick and easy question
- Help upgrading water loop
- Watercooling Ivy Brige
- I feel like my temps are high with my VID-NX680
- Paint for Heatsinks and Radiators and Nickle Plating
- 2X Laing D5 vs 3x Laing DDC-3.2TP
- Copper/Aluminum rig. Are you an anti-corrosion expert?
- 7870 Waterblock Question
- Does this build look good?
- Build Help - Elysium/2600K/2xGTX680Classified
- I need a 4x80mm Radiator. Does any one make them?
- Just gauging interest here...iwaki rd pumps
- About to start a new build, looking for tips
- Will my loop be okay?
- Which radiator
- Watercool MO-RA 3
- Radiator XSPC RX360 v2
- Radiator to cool 3 overclocked GTX 680!
- did maintaince flow dropped masively suddenly
- Help With 2nd Pump
- Reversing flow & EK SLI Parallel Bridge?
- Do I need a second pump?!
- Question for the res experts out there
- gtx 660ti waterblock compatibility
- Question for all
- Custom loop vs Corsair H100 for 3930K cooling
- anyone install water in a haf x?
- DT Direct 2011 waterblock
- Interesting pump mount location idea
- what type of epoxy?
- Waterblock and standalone Water Pump Recommendation
- Is a reservoir needed?
- Odd looking NEW radiator, yellow and green inside - is this normal?
- Is anyone selling a waterblock for a Rampage III Extreme?
- Recommendations for parts on a new system
- Coollaboratory Liquid Pro and Ultra - do they need to be re-applied?
- Fully Modular All-Fitting Watercooling /w Extreme Hardware in a Modified $60 Case
- so... Duke Nukem Forever of radiators is coming out after all? (yes Admiral)
- Will my loop work ?
- ASUS Maximus V Extreme, Board Blocks?
- Fluid XP = leaks like crazy
- what am i missing ? do i need another pump and rad ?
- Alphacool DC-LT pump's o-rings
- Should I use two pumps or no?
- WB CPU Ek Waterblock Supremacy
- will this block work with gtx670 ftw ?
- Picked up some new tubing - I like!
- Planning on releasing a FC block for Gigabyte 680GTX SOC...
- Worth using l-lines in my loop?
- Discoloration only on a BP fitting?
- Mounting Swiftech MCP35X with Corsair 800D
- New reservoir prototype
- Mayhems liquidmetal
- MCP35x broken (I think)
- Oh the fun . . . Tubing Routeing
- anyone got any good advice on my planned loop?
- EX480 or the MCR420-XP ?
- XSPC 670 Waterblock clearance, capacitor smashed
- D-TEK V1 any good for AMD FX?
- Recent build... having some issues.
- New Koolance Pump PMP-500
- Koolance VL3N/M-F13S. Got problems with it.
- 1 loop or 2 separate loops?
- [Bundymania User Review] Triple Radiator (360) Roundup with 22 Rads !
- Heaters/radiators
- HEATKILLER® GPU-X³ 79X0 Full Cover Block Compatibility
- [BenchX] EK Supremacy Elite Review
- Just bought a PA140.3 over a Hwlabs SR1 420mm
- Loop for i7 + 2x 7970 in Lian Li P80R
- Looking for a rampage 3 black chipset block.
- Water cooling Question re adding SLI to existing loop
- intel dx79sr water cooling options ?
- EK Reservoir Clamps are Junk
- Post your mayhem DYE builds !
- is this a good temp for a Core i7 3770k?
- nickel flaking off koolance qdcs?
- Dual 280s in a Fractal R4?
- Help finding 3 port bottom piece of Alphacool Coolplex Pro LT reservoirs please.
- Leak Test and DDC Won't Start
- Swiftech DDC Pump with Alphacool Top
- help reservoir cracked and coolant spilled on carpet?
- Z77 Sabertooth custom water block!
- Help pump problem pmp400
- pump failure & rad question(s)
- Let me introduce: Kubox Cases!
- Quick question PMP450s and DD12V-D5 are they the same
- Questions about XSPC's bay reservoirs
- Water block for gigabyte sniper x79
- Water Temp Question
- How much flow is optimal?
- Radiator choice
- Power efficiency of typical WC system?
- High performance universal GPU block
- EK VGA Supremacy or EK VGA Supreme HF Bridge Edition ?
- Discoloration on Koolance fittings?
- New Koolance CPU-380 Water Blocks!
- I need a couple 7950's that can fit a good W.B. and I'm not finding it easy
- Silly question about more than 2 DDC pumps in series
- My new wc setup in TJ08-e
- Need some help on cooling loads
- Looking for a 2x120mm Fan Radiator Shroud
- Comparing compression fitting BARBS...
- Liquid cooling upgrade advice needed
- Pump/Radiator Fitting
- Can I mix Mayhems Pastel Green Mint concentrate to Ice Dragon fluid?
- Explosive stuff supplied by Koolance.
- Long-term negative effects of running an H100[i] vertically
- Question on temps with MCW82
- Magicool MC RAD 180 can hold 2X580?
- SOME Advice needed PLEASE!!!
- Mix Concentrate 250ml Aurora SuperNova with 1L Ice dragon cooling?
- question about radiator and reservior
- My Second Build!
- Quality Control issues w/ new EK GTX 680 Lightning block?
- HELP deciding if this is worth it (Water cooling an "OLD" 285 GTX)
- Question about coolant
- Issues with port threads?
- Will the H100i fit in *any* Lian-Li case?
- Seeking DD Case Badge
- How to fill reservoir with fill port
- Critique Water Loop
- CaseLabs Merlin Preview Photo & Videoshoot!
- Updating the rocketfish
- need some radiator advice please.
- Cleaning tubes (inside)?
- Thermal Electric Generator (TEG) Waterblock
- Best card that a Maze 4 Acetal GPU block will fit?
- Custom Mod, Powder Coating Suggestions.
- Finally have crap in my loop :( But what the heck is it?
- Will this work or do I need a proper heatsink?
- Watercooling case for old Thermochill 120.3 with 25mm spacing
- Mayhems "Pastel Blue" Problem
- What's on my Aquacomputer temp. sensor?
- is my pump adequate for this loop
- H100i Buyer info
- Possibility to mod rad?
- Building a custom radiator shroud
- Pump Disassembly/Mod
- Thoughts on the TA120.3?
- [Martinsliquidlab.org Review] XSPC D5 Dual Bay Reservoir Combo
- Work Planning Ideas?
- Would a PA 120.3 and Swiftech apogee HD work...
- Cooling a motherboard ....not in a case.
- Problems with using fluorinert.
- Best Slim rad
- Thermalpads on waterblock for GPU
- My 24/7 Sub-zero Water/TEC Cooled Cosmos II
- Witch plate for EK Supremacy and AMD FX-8350
- Having to Add Water To My Rig Very Frequently
- Home built water cooler maintenance "tops offs" versus retail units.......
- New Coolgate radiator tubes full of solder. Any Suggestions?
- Swiftech MCP35x voltage control question
- CPU Block advice
- nzxt kraken x60
- GPU block for my rebuilt loop
- Swiftech MCP 655 PWM-Drive In Testing
- Looking for WC Case suggestion & Compatbility w/ Maelstrom
- AquaComputer MPS Question..
- In search of fittings... Can you help?
- Long long loop