PDA

View Full Version : Intel


Pages : 1 [2] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
  1. Intel IPD
  2. ?? about my 3.06 and hyperthreading
  3. 4pea/4pea+ new bios 3/4 anytime
  4. 3DMk2001 issues
  5. P4 1.8(A) overclocking advice
  6. Help: Boot Block Bios: Checksum Error
  7. Overclocked P4's dying?
  8. I got a dell :)
  9. How high can you get your 1.8A to ?
  10. newbie OCer
  11. Hitting a brick wall at 167MHz FSB ?
  12. Looking for C1 1.8a chips
  13. Mobos w/o P4 12V connector
  14. ddr ram question
  15. 12/9/02 BIOS for 4PEA+
  16. IT7 xtremely unstable
  17. Epox USDM reading -'s or MBM 5 settings
  18. ABIT IT7-MAX2 v2.0 and BIOS Mods...
  19. It7Max2 v2 Audio static during hard drive transfers?
  20. Abit bios updates
  21. 4G4A+ reboots when i run 3dmark 2k1
  22. Newegg HAD aopen granite bay
  23. How well does a Intel i845PE chipset overclock with 2 dimms populated?
  24. HAS anyone seen a 8INXP OC'd hard?
  25. IT7 Max2 Northbridge cooling
  26. IT7 Max 2 version 1/version 2 ?
  27. INtel Reseller Program
  28. Epox 4PEA+ Memory breakdown
  29. springdale = no to the OC???
  30. IT7 Problem, strange sounds !
  31. P4 Thermal Question
  32. Calling P4T533 motherboard owners.
  33. which cpu? 2.0A or 2.4B
  34. Cooling for P4: MCX4000 + Delta vs H2O
  35. AMD GUY Needs advise!!!!!
  36. After Xmas Special @ newegg.com
  37. Granite Bay "in da house"
  38. Anything I can do to get fsb higher? (IT7)
  39. 3006mhz so close
  40. P4T533 Bios 1006.1 problem
  41. What's the best of the best P4 MB right now?
  42. What's your 2.53B OC ?
  43. 64 Bit for the masses
  44. IT7max1 need moded cp BIOS
  45. Some really good B0 chips lately...
  46. Epox 4PEA+ and my Voltages
  47. Epox 4PEA+ and "AGP" Voltage.
  48. Tempurature concerns on PIV chips.
  49. Let's talk about SiS 655
  50. Iwill DPL533 Motherboard
  51. Heatsink installation problems...
  52. IT7-Max2 V.2 Problem with Memory 3:4.....
  53. Lapped My P4
  54. Have to rethink my system, need ideas.
  55. Lower Speed HT CPU's
  56. Best Intel Motherboard?
  57. New bios IT7 Max2v2 - PD6 - Raise the upper limit of CPU core voltage to 1.85V
  58. can it be true!? do i have a c1??
  59. Best dual Xeon board?
  60. It7 Pci Lock Does Not Work
  61. What’s the PCI&AGP Bus on an Aopen AX6BC(440BX) with a Celeron 566(8.5x66)@8.5x115
  62. IT7 Max2.2 Owners
  63. Just passed 20400 3D Marks
  64. Intel Centrino???
  65. ASUS CUSL2-C users plz speak up!!
  66. I need a mobo for >200FSB!
  67. Pin Mod for 66mhz celeron?
  68. What program would you recommend for monitoring voltage, temperature, etc.?
  69. three roads diverged; lurker emerged
  70. Prometia has Landed
  71. P4-M's...changing from battery mode to performance mode.
  72. OEM P4 Vs Retail Boxed P4
  73. P4T533..Floppy Boot in Bios !?!?!?!?
  74. Wich P4 mobo and Memory ?
  75. Gigabyte GA-8INXP in stock at Newegg
  76. New P4's with springdale chipset...
  77. quick question for IT7 max2 rev 2 owners
  78. 2.0a
  79. Just got new 1.8a, any tips on OC'ing
  80. New IT7-1 bios
  81. Speedfan and IT7 v1
  82. possible to unlock a pentium 2 cpu?
  83. Good read on P4PE pci lock or lack of it!!
  84. Check my IT7 Max2 V2.0 review...
  85. New intel drivers (14/01/03)
  86. GOt 6 1.8a to test today :)
  87. P4 .. wich model ?
  88. puzzle
  89. 4PEA+ registry search troubles
  90. SO what's up with Granite Bay?
  91. Need suggestions; upgrade to PIII Alienware Machine...
  92. SIS 655 boards to come?
  93. Abit BE7 any good??
  94. Some P4G8X bandwidth lovin!!!
  95. Epox 4PEA+ and bios ?
  96. IT7-Max2 V2.0 - Black PCB?
  97. dying Epox 4PEA+
  98. chainteck 9ejl2 p4 motherboard
  99. What Epox 4PEA+ board do you have? (pic links inside)
  100. Having some problems with BIOS flashing....
  101. Is 4Ghz possible?
  102. Motherboard Monitor & It7 max2 v2?
  103. Need a Fan for the chipset (Epox 4PEA+) but what size?
  104. Extreme n00b needs advice re: p4 and Prometia
  105. P4 Engineering Sample Question
  106. LOWERING the CPU voltage? Long-Term Damage?
  107. which chip and board
  108. Best mobo for <$150
  109. PEA+ Question
  110. Woe is me, Woe is me :(
  111. Temp probes
  112. Deal of the DAY!
  113. Ocz Pc4800 ??
  114. Overclocking Guide for P4 ??
  115. Bios setting's.
  116. P4G8X board and 3.06 HT Problem
  117. Just wondering...
  118. P4B533 vmem question?
  119. Bh7 Pwah
  120. Jupiler or anyone, need a modded D7 bios :)
  121. 4PEA+ and a PCI Silicon Image ATA133 RAID card
  122. Abit BH7 available soon!
  123. Asus P4S8X or Asus P4PE? What is better performance with ATI R9500PRO?
  124. 4PEA+ cold boot
  125. GIGABYTE 8INXP with P4 4.6Ghz thats right
  126. Way to lock the pci/agp bus on Asus P4S533
  127. has anyone tried this modded it7 max2v2 ios from phantom punisher (oc-forums)?
  128. ABIT BH7 on there website
  129. Chipset vmod for the IT7
  130. 2.4B, Gigabyte 8SQ800 vs. Epox 4PEA+ Results
  131. Going from AMD to Intel - need advice on mb/cpu
  132. Springdale Sandra Benches
  133. ocing Intel Mobo
  134. hyperthreading on a p4 2.53??
  135. 845 GE Goodness
  136. Help With 4PEA+ Please
  137. Need help on new epox 4PEA+
  138. New rig (P4/AMD)
  139. Safest P4 Core Voltage?
  140. ALBATRON with 800MHz support
  141. Abit BH7 showing up on AKIBA!
  142. Moving from an albatron 845E pro2 to an 8INXP?
  143. New p4 mobo
  144. New GA-8INXP Bios posted
  145. Choosing motherboard
  146. 9700pro and Granite bay boards lock ups
  147. Intel Overclock Deterrent
  148. Asus P4G8X temp sensor prob?
  149. Budget P4 motherboard suggestion
  150. New ABIT mobo
  151. Help needed to build ULTIMATE P4 System
  152. Witch MB?
  153. HELP! Need info on ancient P3 sys
  154. INtel P4 3.06ghz 800mhz FSB available!!
  155. P4 3GHz with 320FSB!!!!!!!!!!!!!!
  156. CHEAP sort of...P4C800's!
  157. 2.4b boxed or tray
  158. Canterwood thread over at Abit
  159. [Question] Best Intel Setup???
  160. Abit Centerwood+Springdale mobo's prices
  161. New to Intel - Vapo killed my Barton.
  162. Can someone please mod the new BIOS for IT7-MAX2 V2.0
  163. I've replaced EVERYTHING! I'm STILL having problems! HELP!!!
  164. help with memory on 845e
  165. Intel may again join the farm
  166. Abit Ic7-g Max2
  167. new Abit bh7 wont boot!!! need help
  168. What's missing here? P4/800
  169. New 2.4b c1 sl6rz
  170. IC7 vs IC7-G
  171. 3ghz/800 Available in the UK
  172. Question on dead 1.6gig P4....
  173. Should I buy a P4-3/800
  174. Question about boxed and tray processors....
  175. P4/533 on a Canterwood??
  176. IC7 memory timining issue *READ*
  177. Does the prometia fit on the Abit IC7-G ?
  178. Your P4 2,4 OC results @ default vcore
  179. Question - Where did you get your SL6RZ?
  180. I couldn't resist. MSI 875P Neo!!
  181. Canadian Springdales and Canterwood!
  182. Just Got my IC7-G today LOTS OF PICS!!!
  183. MSI 875P Neo - Impossible to use with the Prometeia ?
  184. Damm you all :p
  185. Any real world #'s on performance diffs between canterwood and springdale
  186. IT7 Max 2 V2 Agp voltage settings ?
  187. Overclocking troubles..........solutions?
  188. So, whats the prescott cpu??
  189. SL6SH who is it?
  190. MSI 875P Neo OC fixes
  191. Serillel 2 Adapters
  192. woot! ordered my 3ghz 800fsb cpu
  193. Help me decide on a processor to purchase!
  194. Is the IC7-G working with the Vapochill PE?Heard bad stories about CW-Vapo...
  195. Abit IC7 with 3.0v DDR ?
  196. Safe P4 voltage question.
  197. Does the ASUS P4C800 work with the Prometeia
  198. Asus P4C800 - Bug 166-199 Mhz fixed - New Bios - Vcore up to 1.95v
  199. ssssshhhh !! don't tell anyone I'm asking about the best Inel combo
  200. ABIT IC7-G Overclocking Newbie Help
  201. Joining the DarkSide
  202. IC7 with "old" P4 2.40B
  203. can some1 comment on this
  204. How Important is NorthBridge Cooling on Canterwoods??
  205. Is this 2.4B a keeper?? (+mainboard question-
  206. Which IC7-G Bios?
  207. IC7 Temp diode
  208. finally making the switch
  209. Got the roundup done, finally....
  210. I hate Zroc and the rest of you :p
  211. I get this error message when I'm trying to load up Acronis DrivesCleaner 6.0
  212. What's the difference between Canterwood and Springdale ??
  213. Hhheeelllppp!!!!!
  214. abit ic7g or msi neo2...
  215. where can i find a new p4 200fsb cpus?
  216. Where to get a 2.8 800FSB?
  217. Motherboard for Intel...
  218. P4/300 @ 4.5gHz !!!
  219. ABIT IC7 or IC7-G
  220. Anyone tried the MSI 875P New 1.31 bios
  221. Does anybody have the EPOX 4PCA3+ ??
  222. Intel 3.2Ghz now on Pricewatch
  223. costa rica/malay/philli p4's?
  224. potential Itanium recall
  225. do the IC7 and MCX4000 play nice?
  226. New MSI 875P bios Fix
  227. Abit IC7 and Prometeia trouble - how to make the reset work?
  228. IS7 woes
  229. sigh!!! gg Intel :(
  230. Owners of the IC7 Motherboard.. Q for you's?
  231. Asus P4C800 + Pentium4 2.8C 800
  232. confused.. 533 fsb or 800?
  233. Abit Sucks!!!!!!!!!!!!!!!!!!!!!!!!!
  234. P4 pre-madness & vaccum tube post madness
  235. My Epox Canterwood rig is not ES friendly
  236. Does the IC7 always crap out at 275 FSB?
  237. iC7 woes
  238. ABIT IS7 post problems
  239. IC7, P4C800, or the MSI ?? Sorry I know this question gets old !:)
  240. IC7-G and Intel INF problems.
  241. P4C800 + 9700 pro
  242. PC4800 Deluxe + 2.6C Overclocking!
  243. ASUS P4P800 (springdale) beating Canterwood!
  244. Ok I give up :O
  245. Can't afford Raptor's, next best SATA drives to use on the IC7???
  246. Help ! need advice, what should I do with the NB cooling on my P4C800 ??
  247. IC7-G SATA question
  248. moterboard Best OC'able?
  249. Playing around in P4C800 bios and its so different
  250. whats the diference between the canterwood and the springdale?